×


Research

Research CIVIL

Dr. V. S. Pradhan


Publications in Peer Reviewed National & International Journals

National:-NIL
International:

  • V. Pradhan and D. Regulwar, “Irrigation Planning with Conjunctive Use of Surface and Groundwater Using Fuzzy Resources”, Journal of Water Resource and Protection, Vol. 5 No. 8, 2013, pp. 816-822.
  • Asif Ali Syed Abed Ali and V S Pradhan, “Determination of potential landfill site for Aurangabad city using multi criteria evaluation”, International Journal of Civil Engineering and Technology, Vol. 8 No. 4, 2017, pp.1260-1267.

Paper presented at National & International Conferences

National:-

  • V.S.Pradhan and D.G.Regulwar, “Assessment of Groundwater resources for Irrigation in Canal Command Area”, BITS Pilani, Hyderabad Campus, 5th -6th April 2013.
  • V.S. Pradhan and D.G. Regulwar, “Linear Programing Approach for conjunctive Use of surface and Groundwater”, HYDRO-2012, IIT Bombay, Mumbai, India.
  • V.S. Pradhan and D.G. Regulwar, “GIS based approach for location of pollution sites on the stretch of a river”, Green Engineering and Environmental Pollution-2012, Jawaharlal Nehru Engineering College, Aurangabad.

International:-

  • Ameya Bagul and V.S. Pradhan, “Water –Balance study of a watershed in Godavari River Basin using SWAT Model”, 37th IAHR World Congress, 13-18 August 2017, Kuala Lumpur, Malaysia. (Paper Accepted)
  • Ameya Bagul and V.S. Pradhan, “Water –Balance study of a watershed using Q-SWAT”, HYDRO International-2016, Central Water and Power Research Station, Pune. 8th -10th October 2016.
  • V.S. Pradhan and D.G. Regulwar “Determination of Optimal Operating Policies of a Single Multipurpose Reservoir by Fuzzy Linear Programming”, Jawaharlal Technical University Hyderabad -2010 Kukatpally, Hyderabad, India.
  • V.S. Pradhan and D.G. Regulwar “Reservoir Operating with Fuzzy Linear Programming”, SRK, PG-College, September 2009, Faridabad.

 

Dr. Mohammed Sadeque


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Mohammed Sadeque and K. A. Patil (2014) “Comparative Study of Modification of Properties of 60/70 Grade Bitumen by Using Waste Tyre and EVA” Indian Highway, vol-42 (7), pp. 27-30.

2. Mohammed Sadeque and K. A. Patil (2013) “Rheological Properties of Nanoclay modified bitumen” Indian Highway, Vol-42, October 2014, pp 19-21.

International:-
1. Mohammed Sadeque, Abdul Majeed (2015), “Assessment of Ground Water Quality around Industrial Area in Aurangabad, Maharashtra” IOSR Journal of Environmental Science, Toxicology and Food Technology. Volume 9, Issue 5 Ver. I (May. 2015), PP 114-117

2. Mohammed Sadeque and K. A. Patil (2014), “Comparative Study of Eva and Waste Polymer Modified Bitumen”, International Journal of Civil, Architectural Science and Engineering Vol. 8 No:1, pp  1-4.

3.Mohammed Sadeque and K. A. Patil (2014) , “Marshall Properties of Waste Polymer and Nanoclay  Modified Bitumen" FACTA University, series Architecture and civil Engineering, Vol. 12, No 1, pp. 1 - 9
4.Mohammed Sadeque and K. A. Patil (2013), Rheological Properties of Recycled Low Density Polyethylene and Polypropylene Modified Bitumen”, International Journal of Advanced Technology in Civil Engineering, Volume-2, Issue-2, pp.24-26.
5. Mohammed Sadeque and K. A. Patil (2014), “An Experimental Study on Effect of Waste Tyre Rubber on 60/70 Grade Bitumen”, International Journal of Structure & Civil Engineering. Vol. 3, No.1, pp. 76-81.
6. Gajanan Shelke and Dr. Mohammed Sadeque (2017), “Monitoring of particulate matter and gaseous pollutant in Aurangabad” ISOR Journal of mechanical and Civil Engineering, Vol. 14, pp 10-15

Paper presented at National & International Conferences

Details of Publication
National:-
1.Mohammed Sadeque, Patil K.A, (2011) ,”Effect of Industrial Waste Disposal on Properties of Soil”, national conference ON Environmental pollution and Management, GECA Aurangabad.

 


International (In India):-
1. Mohammed Sadeque and K. A. Patil (2013), “Waste Plastic Modified Bitumen: A Review”, 6th International Congress of Environmental Research, Aurangabad India.

2. Mohammed Sadeque, khalekar U. J. and Patil K. A (1997) “ Effect of industrial waste on properties of soil” International conference of  Indian geotechnical society Baroda chapter.


International (Abroad):-
1.
2.

 

Dr. Madhuri Mangulkar


Publications in Peer Reviewed National & International Journals

Details of Publication
International:-
1)Mangulkar M.N., Jamkar S.S., “Review of Particle Packing Theories Used For Concrete Mix Proportioning,” International Journal of Scientific and Engineering Research, 9-10 May 2013.
2) Mangulkar M. N.,Jamkar S.S., “Digital Image Processing Based System for the Characterization of Coarse Aggregate”, Jordan Journal of Civil Engineering, Vol. 10 (1), 2016.
3) National Patent has registered vide Design Application No. 265756 in class 10-04 Dated 18/09/2014.
4) National Patent has been filed vide Application No. 1454/MUM/2014 dated 24/04/2014.

Paper presented at National & International Conferences

Details of Publication
National:-
1.
2.

International (In India):-
1.
2.

International (Abroad):-
1.
2.

Dr Sudhasheel Ghosh


Publications in Peer Reviewed National & International Journals
  • Suddhasheel Ghosh and Bharat Lohani (2015), Development and comparison of aerial photograph aided visualization pipelines for LiDAR data, International Journal of Digital Earth, 8(8),Special Issue: “Geovisual Analytics: Human Factors”, DOI: 10.1080/17538947.2014.897386.
  • Suddhasheel Ghosh, Bharat Lohani and Neeraj Misra (2014), A study-based ranking of LiDAR data visualization schemes, Cartography and Geographic Information Science, 41(2), 138 – 150, DOI: 10.1080/15230406.2014.880071
  • Suddhasheel Ghosh and Bharat Lohani, (2013), Mining LiDAR data with clustering algorithms, International Journal of Remote Sensing, 34(14), 5119 – 5135. DOI: 10.1080/01431161.2013.787499.
  • Gautam Talukdar, Suddhasheel Ghosh and P. S. Roy (2004), Landscape Dynamics in North East Region of India (Meghalaya State) Using Spatial Decision Tree Model, Geocarto International, 19(1), 11–18. DOI: 10.1080/10106040408542294
  • Sameer Saran, Suddhasheel Ghosh, Gaurav Srivastava, P. S. Roy, Gautam Talukdar and Nupoor Prasad (2003), Spatial Decision Support System for Biodiversity Conservation Prioritization, Asian Journal of Geoinformatics, 4(1), 21-30.

 

Paper presented at National & International Conferences

  • Suddhasheel Ghosh and Bharat Lohani (2012), Experimental evaluation of LiDAR data visualization schemes, ISPRS2012, Commission II WG 6, Melbourne, Australia.
  • Suddhasheel Ghosh and Bharat Lohani (2011), Heuristical feature extraction from LiDAR data and their visualization, ISPRS Workshop Laser Scanning2011, University of Calgary, Canada.
  • Suddhasheel Ghosh and Bharat Lohani (2007), Near realistic and three dimensional visualization of terrain using LiDAR data, Workshop on Geovisualization, Hochschule fur Technik, Universitaet Stuttgart, Stuttgart, Germany.
  • P. S. Roy, Sameer Saran, Suddhasheel Ghosh, Nupoor Prasad, Harish Karnatak and Gautam Talukdar (2002), Development of Biodiversity Information System for North East India using Internet GIS, Symposium of Geospatial Theory, Processing and Applications, Ottawa, Canada.
  • Bharat Lohani, Siju Chacko, Suddhasheel Ghosh and Sandeep Sasidharan (2012), Surveillance system based on Flash LiDAR, Proceedings of the XXXII INCA International Congress on Cartography for Sustainable Earth Resource Management, Organised by Indian National Cartographic Association and National Hydrographic Office Dehradun. (presented by Dr. Bharat Lohani) – won Best Paper award.
  • Suddhasheel Ghosh, Satrajit Kumar, and Ashu Jain (2005), Godavari river flow prediction using neural networks, Proceeding of the National Conference on Hydraulic, Water Resources, Coastal, and Environmental Engineering with Special Emphasis on Tsunami (HYDRO2005), December 8-9, 2005, Siddaganga Institute of Technology, Tumkur, Karnataka, India (presented by Suddhasheel Ghosh)
  • Suddhasheel Ghosh and Bharat Lohani (2012), Study, development and comparison of visualization pipelines for airborne LiDAR datasets, ISRS-ISG Joint Symposium, New Delhi, December 5 – 7, 2012.
  • Suddhasheel Ghosh and Bharat Lohani (2007), Development of a system for 3D visualization of LiDAR data, Map World Forum, Hyderabad, India (best student poster prize)
  • Suddhasheel Ghosh and Bharat Lohani (2007), Three dimensional visualization of LiDAR data, National Institute of Design, Ahmedabad

 

Mr L.K. Kokate


Publications in Peer Reviewed National & International Journals

Nil

Paper presented at National & International Conferences

Details of publications:
National: - 1

  • Presented research paper entitled “Stabilization of black cotton soil using bio enzyme” in a national conference on Green Engineering and Environmental Pollution, at Jawaharlal Nehru Engineering College, Aurangabad during 10th- 11th Feb 2012.

 International (in India): - 1

  • Prresented a research paper entitled “Utilization of industrial waste for soil stabilization” in international conference on advances in architecture and civil engineering, Bangalore during 21st-23rd June 2012

International (abroad):- Nil

 

Mr L. G. Kalurkar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1.

2.
International:-

  • Ahlawat, Dewanshu, and L. G. Kalurkar. "Coconut shell as partial replacement of coarse aggregate in concrete." IOSR J Mech Civil Eng (2014): 61-4.
  • M.S.Kumawat and L. G. Kalurkar. “Analysis and design of multistoried building using composite structures”,ijscer (2014).
  • Vinod B Shikhare, LG Kalurkar, “Effect of different types of steel fibers with metakaolin & fly ash on mechanical properties of high strength concrete”, International Journal of Civil Engineering and Technology(2013).
  • Vasant B Jatale, LG Kalurkar, “Punching shear high strength steel fiber reinforced concrete slabs”, International Journal of Engineering Research and Applications  (2013).
  • Mohammad Qamruddin, LG Kalurkar, “Utilization of Unprocessed Rice Husk Ash as a Cementitious Material in Concrete (A Comparison with Silica Fume)”, International Journal of IT, Engineering and Applied Sciences Research  (2013).

Paper presented at National & International Conferences

Details of Publication
National:-
1.

International (In India):-
1.

International (Abroad):-
1.
2.

Research IT

Dr. Sharwari Tamne


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Nil
International:-


Sr. No.

Publication Title

Author

Journal Name

Page Nos

Year

1

Security Issues In Cloud Computing

Manisha Bharati,
Sharvari Tamane

International Journal of Advanced Technology in Engineering and Science, Vol No. 5, Issue No. 03, impact factor 2.8

 

March 2017

2

Ranking Technically Influential Users on Web Blogs

Amruta K. Jadhav, Sharvari Tamane

International Journal of Computer Science and Information Technologies, (IJCSIT), Vol. 7 (4), 2016, indexing: Inspec, Google Scholar, Pub Zone, Open J gate, Scirus, EBSCO publishing, CSEB, Scribd etc. Impact factor 3.32

1889-1893

July 2016

3

Approaches to Rank Technical Blog Users: A Survey

Amruta Jadhav, Sharvari Ttamane

International Journal of Computer Science and Information Technology IJCSIT, Vol 7(2), ISSN: 0975-9646. Indexing, Directory of Open Access Journals DOAJ, Google Scholar, Open J-Gate, Cabell, Publ. Inc., Index Copernicus, Journal Master List. Impact factor 3.32

945-950

May to June 2016

4

Design tool for predicting student performance using ID3 algorithm

Amruta Jadhav, Sharvari Ttamane

International Journal of Advanced Research in Basic & Applied sciences, ISSN No. 2394-4072, vol. 2 (1)

135-140

July 2015

5

A Review on Virtualization: A Cloud Technology

Sharvari Tamane

International Journal on Recent and Innovation Trends in Computing and Communication, IJRITCC, ISSN: 2321-8169, Volume: 3 Issue: 7, Scientific Journal Impact Factor 5.837. Indexed in Google Scholar, Index Copernicus, Slideshare, Scribd, Academia, Research Gate and many more

 

July 2015

6

Adaptive Query Search Using CBIR

Kanchan Vaishnav, Dr. Sharvari. C. Tamane

International Journal of Emerging Technology and Advanced Engineering (ISSN 2250–2459(Online), An ISO 9001:2008 Certified Journal) www.ijetae.com Vol 5, Issue 6, ISRA Impact factor 2.324. Indexed by Google, Yahoo, Entire Web, UK Index, Get Cited, Exact Seek, Amphibia Info Mine

 

June 2015

7

Text Analytics for Big Data

Dr. Sharvari C. Tamane

International Journal of Modern Trends in Engineering and Research, Volume 02, Issue 03, e-ISSN: 2349-9745, p-ISSN: 2393-8161 www.ijmter.com, Scientific Journal Impact Factor (SJIF): 1.711, Indexed by SCIRUS, Google Scholar, ResearchBib, INNSPACE, ISSUU, digg, Yahoo INDIA, docstoc.com, Scribd

 

March - 2015

8

Watermarking 3D Surface Models into 3D Surface Models Based on ANFIS

Sharvari C. Tamane, Dr. R. R. Deshmukh

Advances in Computing, Scientific & Academic Publishing, California, USA Vol.2, No.3, ISSN: 2163-2944, Indexing: Google Scholar, EBSCO zbMATH, CASSI, CROSS ref

2163-2979

June 2012

9

Fragile Watermarking of 3D Surface Models into 3D Surface Models

Sharvari C. Tamane, Dr. R. R. Deshmukh

International Journal of Computer Information Systems, Bangalore, India, Silicon Valley Publishing, Vol 4, Num 4, ISSN 22295208. A Non-Profit Research Organization

 

April 2012

10

Blind 3D Models Watermarking Using MRR and Fuzzy Logic

Sharvari C. Tamane, Dr. R. R. Deshmukh

International Journal of Computer Science and Information Technology, IJCSIT, Chennai, India, AIRCC, vol. 4, No. 1, ISSN: 0975–9646 (online version); Global Impact Factor 0.314. Indexed by Inspec, Google Scholar, pub zone, DOAJ, Open J-Gate, SCIRUS, EBSCO publishing, CSEB, Scribd, ULRICHS WEB- global serials directory, pubget BETA, CiteSeer, .docstoc, PKP, WorldCat, Proquest, cnki

 

Feb 2012

11

Blind 3D Models Watermarking Using MRR and DCT

Sharvari C. Tamane, Dr. R. R. Deshmukh,

International Journal of Computer Engineering and Software Technology, IJCEST, Darya Ganj, New Delhi, India, Serial Publication, Indexing and Reviews: Mathematical Reviews, MathSciNet, Index Copernicus Zentralblatt fur Mathematik, EBSCOhost, SCOPUS, Elsevier's bibliographic database, Ei databases index, EMBASE, EMCare, CAP International, and Indian Sciences Abstract. ISSN: 2229-3086

 

Jan-Jun 2012

12

Watermarking Representation in the Geometry of 3D Objects

Sharvari C. Tamane, , ,

International Journal of Software Engineering and Computing, IJSEC, Robust Gurgaon, Haryana, India, Serial Publication, ISP, vol. 2, No.1, ISSN: 2229-7413 Indexing and Reviews: Mathematical Reviews, MathSciNet, IndexCopernicus Zentralblatt fur Mathematik, EBSCOhost, SCOPUS, Elsevier's bibliographic database, Ei databases index, EMBASE, EMCare, CAP International, and Indian Sciences Abstract

 

Jan-Jun 2010

13

Poster Paper: Digital Watermarking Using Image Fusion Method,

Sharvari C. Tamane, Dr. R. R. Deshmukh,

International Journal of Recent Trends in Engineering, IJRTE2009 Academy Publisher, ACEEE, vol. 1, no.2,

 

May 2009

Paper presented at National & International Conferences

Details of Publication
National:-


Sr. No.

Publication Title

Author

Journal Name

Page Nos

Year

1

Performance Improving in Parity Coding: Audio Steganography Technique

Prutha Bhalde, Dr. Sharvari C. Tamane

Pre-Science Congress-2014, A national level conference on Science and Technology for Human Development, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad

 

30th and 31st December, 2014

2

NoSQL Data Management for Big Data

Dr. Sharvari C. Tamane

Pre-Science Congress-2014, A national level conference on Science and Technology for Human Development, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad

 

30th and 31st December, 2014

3

A Survey of Spatial Domain Watermarking Methods

Sharvari C. Tamane, Dr. R. R. Deshmukh

2nd National Conference on Emerging Trends in IT – NCETIT-10, PES Aurangabad

 

Jan 2010

4

Digital Image Watermarking Using 2D Wavelet Transform

Sharvari C. Tamane,

3rd National Conference on Computing for Nation Development INDIACom 2009, Bharati Vidyapeeth's Institute of Computer Applications and Management, (BVICAM), A-4, Paschim Vihar, Rohtak Road, New Delhi – 63,

 

26-27 February 2009

5

Content Based Image Retrieval Using Color, Shape & Texture Features

Sharvari C. Tamane

NCCITA-08, National Conference on Communication, Information Technology & Automation, Parshvanath Charitable Trusts Parshvanath College of Engineering, Thane (W), Kasarvadvali, Ghodbandar Road, Thane (W), 400601,

 

17-18 January 2008

6

Content Based Image Retrieval Using High Level Semantic Features

Sharvari C. Tamane, ,

National Students Convention (NSC), INDIACom 2008, CSI, Bharati Vidyapeeth's Institute of Computer Applications and Management, A-4, Paschim Vihar, Rohtak Road, New Delhi – 63,

 

February 8-9 2008

7

Content Based Image Retrieval Using Image Mining

Sharvari C. Tamane, , A,

National Conference on "Emerging Trends in information Technology" (NCETIT'08), PES, College of Engineering, Aurangabad

 

January 28th -29th, 2008

8

Neural Network Based Brain Cancer Detection and Classification

Sharvari C. Tamane

A National Level Conference on Intelligent Systems (NCIS 2007), Muffakham Jah College of Engineering and Technology, Road no.3, Banjara Hills, Hyderabad, Andhra Pradesh, 500034

 

24-25 August, 2007

9

Image Registration

Sharvari C. Tamane

A National Level Conference on “Computational Science and Information Processing” (CSIP), MGM’s, Jawaharlal Nehru Engineering College, Aurangabad

 

1-3 April, 2006

10

Image Registration

Sharvari C. Tamane

National Level Students Technical Symposium “CHRYSALIS 06”, MGM’s, College of Engineering and Technology, Kamothe, Navi Mumbai

 

28-29 March, 2006

11

E Governance,

Sharvari C. Tamane, A. N. Ghule

A National Level Technical Symposium “Technomillenium 2005, MIT, Aurangabad

 

15-17 September, 2005

International (In India):-


Sr. No.

Publication Title

Author

Journal Name

Page Nos

Year

1

Study and Design of Ontology for Cloud Based Web Services Attacks: A Survey

Smita Chavan, Sharvari Tamane

IEEE sponsored International Conference on Global Trends in Signal Processing Information Computing and Communication (ICSPICC-2016), SSBTs College of Engineering and Technologies, Bambhori, Jalgaon, MS India,

 

22-24 December 2016

2

Promoting Distributed Accountability for Data Sharing in the Cloud

Sharvari Tamane, Deepa Dharmadhikari, Priyanka Shinkar

First International Conference on Research in Intelligent Computing in Engineering, RICE 2016, Mc. Graw Hill Education India Private Ltd. ISBN (13): 978-93-5260-126-4, ISBN (10): 93-5260-126-2

 

8-9 April 2016

3

CBIR Using Hybrid Techniques

Sharvari Tamane, Kanchan Vaishnav

First International Conference on Research in Intelligent Computing in Engineering, RICE 2016, Mc. Graw Hill Education India Private Ltd. ISBN (13): 978-93-5260-126-4, ISBN (10): 93-5260-126-2

 

8-9 April 2016,

4

Non-relational databases in Big Data

Sharvari Tamane

Second International Conference on Information and Communication Technology for Competitive Strategies ICTCS 2016, ACM - International Conference Proceedings Series (ICPS), ACM Digital Library, ISBN 978-1-4503-3962-9, Udaipur, Rajasthan, India

 

4-5 March 2016

5

3D Models Watermarking Using Fuzzy Logic

Sharvari C. Tamane, Dr. R. R. Deshmukh, Dr. R. R. Manza,

International Conference on Advances in Computing, Control and Telecommunication Technologies - ACT 2009, Trivendrum, Kerala, India,

 

Dec. 2009

6

Biomedical Image Processing and Segmentation

Sharvari C. Tamane

International Conference on Intelligent Systems and Their Applications, Sudharsan Engineering College, Sathiya Mangalam, Pudukkotai District 622501,

 

24-25 August, 2007

International (Abroad):-


Sr. No.

Publication Title

Author

Journal Name

Page Nos

Year

1

Optimization of Blind 3D Model Watermarking Using Wavelets and DCT

Sharvari C. Tamane, Dr. R. R. Deshmukh, Dr. Vandana Jadhavpatil, , ,.

ISMS 2013, 4th International conference on Intelligent Systems, Modelling and Simulation, Bangkok, Thailand, 2166-0662/13 $26.00 © 2013 IEEE DOI 10.1109/ISMS.2013.63, IEEE computer Society

 

29-31 Jan 2013

 

Ms. Parminder Kaur


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1.
2.

International:-

  1. Paper on “ DoS attack detection system based on multivariate correlation analysis”, in IJCEA, Vol XI, Issue I, Jan 2017 (ISSN 2321-3469)
  2. Paper on “A Review of Best Keyword Cover Search”, in Journal of Data Mining & Management”, Mat Journals Vol 1 Issue 1 2016.
  3. Paper on “Driver Drowsiness monitoring based on eye & yawn detection”, was published in IJESM (IF : 2.745) (ISSN : 2277-5528) in July 2014.
  4. Paper on “Web Usage Mining using ART Neural Network” was published in The International Journal, ISSN : 2251-1571 in July 2011.

Paper presented at National & International Conferences

Details of Publication
National:-

  1. Presented a paper on “Cloud computing architecture for technical educational institutes” in National Level Conference held at Pioneer Institute of Professional Studies, Indore in 2010.
  2. Presented a paper on “Montgomery Multiplication Algorithm implementation for large key size, used for Cryptographic Applications “in National Conference at JNEC in 2009.
  3. Presented a paper on “Web Usage Mining using ART Neural Network” National Conference on Emerging Trends in Engineering and Management in year 2008 at JSPM’s Rajarshi Shahu College of Engineering, Pune.
  4. Presented a paper on “E-Governance” in National Level Conference held at MIT Aurangabad, in year 2006.

International (In India):-

  1. Paper selected in IEEE conference “ICISIM” on “Adaptive thresholding to robust image binarization for degraded document images” to be presented in Oct 2017.
  2. Paper selected in IEEE conference “ICISIM” on “Denial –of- Service Attack Detection System” to be presented in Oct 2017.
  3. Paper on "A Study Report on Spatial Data Mining and its application in agriculture” is presented at International Conference at Thakur College, Kandivli, Mumbai in Dec 2011.

International (Abroad):-
1.
2.

Research CSE

Dr Vijaya Musande

Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
nil
International:-
1. Vijaya Musande, Anil Kumar and Karbhari Kale “Evaluation of Fuzzy based Classifiers for Cotton Crop Identification” , Geocarto International, Taylor & Francis series DOI:10.1080/10106049.2012.685894,2012.
2. Vijaya Musande, Anil Kumar and Karbhari Kale “Effects of Indices for Cotton Crop Identification using Soft Computing Technique”, Journal of ISRS, Springer, vol. 36,2012.
3. Vijaya Musande, Anil Kumar and Karbhari Kale “Effects of Indices on Temporal Data for Specific Crop Identification  by using Possibilistic C-means”, Artificial Intelligent Systems and Machine Learning ISSN 0974-9667,Volume 3,No 13, December 2011.

4. Pawan S. Maniyar,  Dr. Vijaya Musande, “Rules Based Intrusion Detection System Using Genetic Algorithm” , International Journal of Computer Science and Network (IJCSN), Volume 5, Issue 3, June 2016,ISSN (Online) : 2277-5420,Impact Factor: 1.02.
5. Sandip A. Kharat, Vijaya B. Musande, “Cotton Crop Discrimination Using Landsat-8 Data”, International Journal of Computer Science and Information Technologies (IJCSIT), Vol. 6 (5) , ISSN : 0975-9646, PP. 4381-4384, 2015.
6. Madhuri B. Kawarkhe,Vijaya Musande, “Hybrid Approach for Crop Discrimination Using Possibilistic Fuzzy C-Means and Support Vector Machine”, International Journal of Innovative Technology And Research(IJITR),Volume No.3, Issue No.2, pp. 1966 – 1972, February – March 2015.
7. Bhanupriya Gaikwad, Vijaya Musande, “Hyperspectral Image Classification Using Harmonic Analysis Integrated with BFO Optimized SVM”, International Journal of Computer Science and Network (IJCSN), Volume 4, Issue 4, ISSN (Online) : 2277-5420,Impact Factor: 0.417, pp.612-618, August 2015.
8. Ganesh B. Shinde,Vijaya B. Musande, “Cotton Crop Classification Method Using Levenberg-Marquardt Neural Network and its Performance Analysis on Vegetation and Green Leaf Indices”, International Journal of Innovative Technology And Research (IJITR),Volume No.3, Issue No.1, ISSN : 2320 –5547, pp. 1851 – 1857, December – January 2015.
9. Mandar C. Lokhande, Prof. V. B. Musande, “Study and Survey of Image Registration”, International Journal of Engineering and Management Research (IJEMR), Volume-5, Issue-6, ISSN (Online): 2250-0758, ISSN (Print): 2394-6962 , pp. 253-258, December-2015.

 

 

 

Paper presented at National & International Conferences

Details of Publication
National:- .Vijaya Musande, Anil Kumar and Karbhari Kale -“Identification of Cotton Crop using Temporal Data – A Fuzzy Classification Approach”, Annual Convention of Indian Society of Remote Sensing on Empowering  Rural India through space Technology, Bhopal ,2011

International (In India):-
1. V. Musande , P.S.Revankar and K.V.Kale “Database design for GIS based Decision Based Support System” International conference on Advances in Computer vision and Information Technology 2010 ISBN:9789380026954  
2. Rohini Narwade,Vijaya Musande, “Road extraction from airborne LiDAR data using SBF and CD-TIN”,IEEE Xplore , International Conference on Advances in Computing, Communications and Informatics (ICACCI), ISSN:2248-9622,Vol. 4 ,Issue 12 ,pp.54-62,  01 Dec 2014.
3. Shinde Ganesh B. , Musande Vijaya B. , “Remote Assessment and Change Detection in Greenlai Using Different Vegetation Indices” , International Conference on Multidisciplinary Research & Practice (ICMRP), Page no. 374-380, 2014.
4. Madhuri Kawarkhe, Vijaya Musande, “Performance Analysis Of Possisblistic Fuzzy Clustering And Support Vector Machine In Cotton Crop Classification” ,  IEEE Xplore, DOI: 10.1109/ICACCI.2014.6968584, 01 December 2014.


International (Abroad):-
1. VijayaMusande, Arjun Mane,Ramesh Manza and Karbhari Kale,“Segmentation of Remote Sensing image for identification of vegetation”,9th International Symposium on Geospatial Information Technology and Applications. Mapasia2010, Kuala- Lumpur, Malaysia. http://www.mapasia.org/2010/proceeding/pdf/vijayam.pdf
2. 3. Vijaya Musande, Anil Kumar and Karbhari Kale  “Temporal Indices Data for Specific Crop Discrimination using Fuzzy Based Noise Clasifier” The XXII Congress of International society of Photogammetryand Remote Sensing 2012.

 

Dr Deepa Deshpande


Publications in Peer Reviewed National & International Journals

Details of Publication
International :

  1. Deepa Deshpande, ”An efficient method for discovery of large item sets”, International Journal of Data Mining , Modelling and Management, Inderscience, Volume 8, Issue 4, 2016, pp. 303-314, Print ISSN: 1759-1163 Online ISSN: 1759-1171.
  2. Neha Makariye, Deepa Deshpande, “Towards Online Shortest Path Using LTI”, International Journal of Computer Science & Network(IJCSN), Volume 5, Issue 6 , December 2016, ISSN : 2277-5420
  3. Tahura Shaikh, D.S.Deshpande, “A Review on Opinion Mining and Sentiment Analysis”, International Journal of Computer Applications (IJCA) Proceeding on , NCRTCSIT-16 June 2016,pp.6-9, ISSN :0975 – 8887.
  4. Tahura Shaikh, D.S.Deshpande, “Feature Selection Methods in Sentiment Analysis and  Sentiment Classification of Amazon Product Reviews”, International Journal of Computer Trends and Technology, Volume 36,Number 4, June 2016, pp. 225-230, Print ISSN: 2349-0829 Online ISSN: 2231-2803.
  5. D. S. Deshpande, A. M. Rajurkar, R. R. Manthalkar, “Texture Based Associative Classifier - An Application of Data Mining for Mammogram Classification”, Computational Intelligence in Data Mining - Volume 1, Smart Innovation, Systems and Technologies Series, Springer, vol. 31, pp.387-400, 2015, ISSN: 2190-301.
  6. D. S. Deshpande, “A Novel Approach for Association Rule Mining using Pattern Generation”, International Journal of Information Technology and Computer Science (IJITCS), vol. 11, pp. 59-65, October 2014, ISSN: 2074-9007 (Print), ISSN: 2074-9015 (Online).
  7. D. S. Deshpande, “Association Rule Mining Based on Image Content”, International Journal of Information Technology and Knowledge Management (IJITKM), vol. 4, no. 1, pp. 143-146, January-June 2011, ISSN: 09734414.

Paper presented at National & International Conferences

Details of Publication
National:-

  1. D.S.Deshpande, Supriya Saptarshi, Prashant Khairnar, “Suggestion Scheme: Approach and Implementation in an Educational Institute”, 27th National Convention of INSAAN ,21st  -22nd  Jan 2017 at  Jamshedpur.
  2. Tahura Shaikh, D.S.Deshpande, “A Review on Opinion Mining and Sentiment Analysis”, Proceedings of NCRTCSIT-16 -National Conference on Recent Trends  in Computer Science &  Information Technology in association with Indian Society for Technical Education(ISTE), International Journal of Computer Applications(IJCA) and  International Journal of Emerging  Trends in Engineering and Basic Sciences(IJETEBS),Priyadarshini  College of Engineering ,Nagpur, 26th & 27th Feb 2016, pp.81-85.
  3. D.S.Deshpande, P. Khairnar, A.B.Kulkarni, “Five Smart ways to create an Idea Culture in Educational Institute”, 26th National Convention of INSAAN ,8th -9th Jan 2016 at  Pune.
  4. D. S. Deshpande, A. M. Rajurkar,  R. R. Manthalkar, “Medical Image Analysis: An Attempt for Mammogram Classification using Texture Based Association Rule Mining”, Proceeding of 4th National Conference on Computer Vision, Pattern Recognition, Image Processing and Graphics in association with IUPRAI, NCVPRIPG-2013, , IIT Jodhpur, INDIA, December 18-21, 2013, pp. 1-5, Print ISBN: 978-1-4799-1586-6.
  5. D. S. Deshpande, A. M. Rajurkar,  R. R. Manthalkar, “Medical Image Analysis: An Attempt for Mammogram Classification using Texture Based Association Rule Mining”, Doctorate Symposium of  4th National Conference on Computer Vision, Pattern Recognition, Image Processing and Graphics in association with IUPRAI, NCVPRIPG-2013, IIT Jodhpur, INDIA, December18,2013.
  6. D.S. Deshpande, A.R. Tungar, “Discovering Association Rules Based on Image Content”, Proceedings of National Conference on “Recent Advances in Computers and Communications”, Sept , 2008, Vidyalankar Institute of Technology, Wadala, Mumbai ,RACC-08,Sept 29-30, 2008,pp.11-13.
  7. D.S.Deshpande, A.R.Tungar, “Grid Computing :: Subset of distributed computing”, Proceedings of National Conference on Advanced Computing and  Computer Networks ,NCACCN-2007,March 2007,Dr. Vithalrao Vikhe Patil College of Engg, Ahmednanar, 9th &10th March 2007,pp.93-95.
  8. D.S. Deshpande, A.R.Tungar, “RFID: Document Tracking System”, Proceedings of NC-Vcom 2007, SAINTGITS-Mar Gregorious College Of Engg,Kottayam,pp.84-87.
  9. A.R.Tungar, D.S. Deshpande, “Elliptic Curve Cryptography”, Proceedings of National Conference on Information Security at Walchand College of Engineering, ...INSEC-2K7 ,July 2007.
  10. A.R.Tungar, D.S. Deshpande, “Importance  Of Montgomery Algorithm in ECC”, Proceedings of National Conference on Information Security, MERG-07,NOV2007,Shrimati Kashibai Navale College Of Engg ,Pune ,pp.34-37.
  11. D.S. Deshpande, A.R.Tungar, “High Performance Computing”, Proceedings of TECHNOMILLIUM-05,15th, 16th & 17th Sept 2005,pp.18-23.

International (In India):-

  1. D. S. Deshpande, A. M. Rajurkar,  R. R. Manthalkar, “Texture Based Associative Classifier”, Proceeding of International Conference on Computational Intelligence in Data Mining, ICCIDM-2014, Veer Surendra Sai University of Technology, Burla, Sambalpur, Odisha, INDIA, 20-21 December 2014, pp. 24, ISSN: 2190-3018.
  2. K.S.Takare,A. M. Rajurkar,  R. R. Manthalkar,D. S. Deshpande, “Video Retrival Using singilar value decomposition and latent semantic indexing”, Proceeding of International Conference on Communication , Information & Computing Technology(ICCICT-2012), Sardar Patel Institute of Technology ,Mumbai, 19th-20th Oct 2012,pp.1-5, Print ISBN: 978-1-4577-2077-2.

International (Abroad):-

  1. D. S. Deshpande, A. M. Rajurkar, R. R. Manthalkar, “Mammogram Classification using Association Rule Mining”, Proceeding of 10th   International Conference on Data Mining, DMIN’14, , Las Vegas, Nevada ,USA, July 21-24,2014, pp. 95-101, ISBN #: 1-60132-267-4.

 

Dr Smita Kasar


Publications in Peer Reviewed National & International Journals
  1. Smita Kasar, M.S.Joshi, “Improved Model for the detection of Myocardial Infarction from Multilead ECG using QRS Point Score as an Additional Feature”, Journal of Theoretical and Applied Information Technology, ISSN: 1992-8645,  Vol.85. No.2, March 2016, pp 183-191
  2. Smita Kasar,  M.S.Joshi, “Analysis of Multi-Lead ECG Signals using Decision Tree Algorithms”, International Journal of Computer Applications ISSN: 0975 - 8887 , Vol. 134, No 16, January 2016,pp 27-30
  3. Archana Salunke, Smita Kasar, “Personalized Recommendation System for Medical Assistance using Hybrid Filtering”, International Journal of Computer Applications , Vol 128 (9), October 2015.
  4.  Smita Kasar, M.S.Joshi,  “Identification of Myocardial Infarction from Multi-lead ECG signal”, International Journal of Engineering Research and Applications ISSN: 2248-9622, Vol. 5, Issue 10, October 2015, pp.28-32
  5. Deshmukh Priyanka , Smita Kasar, Security Improvisation in Steganography using AES 128/192/256” , International Journal of Engineering Research & Technology , Vol. 3 - Issue 11 (November - 2014)
  6.  Smita Kasar, Abbhilasha Mishra, M.S.Joshi,  “Performance of digital filters for noise & signal removal from ECG signals in time domain”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation & Control Engineering (IJIREEICE), Vol 2Iissue 4,April 2014. 
  7. M.S.Joshi, Smita Kasar, Atul Mundaware,  “Comparative analysis for time complexity of Sieve benchmark algorithm on CPU & GPUs”, VISTA  International Journal on Energy, Environment & Engineering, Vol.1, Issue 6 pp. 53-58,2016
  8.   Abhilasha Mishra, Ganesh Janvale, Smita Kasar, A.J.Patil, “Levenberg-Marquardt & Conjugate Gradient Neuro-modeling of Simulated Miniature Rectangular Microstrip Antenna”, Advanced Computational Techniques in Electromagnetics ( Journal, Published from Germany),ISSN:   2194-0266, 2012.
  9.  Abhilasha Mishra, Vaishali Bhagile, Smita Kasar, P.M.Patil “Effect of Normalized Scale on Design of Rectangular Microstrip  Antenna by using FFBP”, International Journal of Computer Science and Engineering, Vol. 02, No. 03, 2010, 626-629
  10. Smita Kasar, Abbhilasha Mishra, P.S.Revankar, "Quadratic Programming Problems using Genetic Algorithms", International Journal of Computer Science and Management Systems-ISSN: 0975-5349, Vol. 2 No. 1, 2010

 

Paper presented at National & International Conferences

“Performance Enhancement for Detection of Myocardial Infarction from Multi-Lead ECG” (Accepted for Publication in Springer), ICAIECES-2017  The International Conference on Artificial Intelligence and Evolutionary Computations in Engineering Systems, Department of Electrical & Electronics Engineering, MITS, Madanapalle, Chittoor District, Andhra Pradesh, 27th to 29th April 2017
  1. Smita Kasar, M.S.Joshi, “ECG Signal Processing: A Survey”, International Journal of Computer Applications- Proceedings on International Conference in Computational Intelligence (ICCIA 2012), Sandip Institute of Technology and Research, Nasik, Maharashtra, 2012.
  2. Abhilasha Mishra, Ganesh Janvale, Smita Kasar, B.V.Pawar,  A.J.Patil , “Neuro-modeling of simulated miniature rectangular microstrip antenna by using feed forward and feed back propagation”, IEEE AEMC 2011, Kolkata.
  3. P.S.Revankar, Smita Kasar, Abbhilasha Mishra, “Optimization of nonlinear programming problems using non-traditional method: genetic algorithms” , International Conference and Workshop on Emerging Trends in Technology, ICWET’10, Thakur College of Engg.,Mumbai. 

 

Dr Jayshri Pagare


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1.
2.

International:-
1. IJCSN International Journal of Computer Science and Network, Vol 2, Issue 2, April 2013 pp 96-102,ISSN (Online) : 2277-5420 “Energy-Efficient Cloud Computing: A Vision, Introduction, and Open Challenges.”

2. International Journal of Advanced Research in Computer and Communication Engineering , Vol. 3, Issue 12, December 2014, Copyright to IJARCCE DOI 10.17148/IJARCCE 8828 on “A technical review on comparison of Xen and KVM hypervisors: An analysis of virtualization technologies”, pp 8828-8832.

3. International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), Web Site: www.ijettcs.org, Volume 3, Issue 6, November-December 2014 ISSN 2278-6856 pp 278-282 on “Understanding of Energy efficiency in cloud computing”.

4.Int.J.Computer Technology & Applications, Vol 6 (1),35-42
IJCTA, Jan-Feb 2015, Available online@www.ijcta.com, on “Design and simulate cloud computing environment using cloudsim”.

5. International Journal of Innovative Research in Computer and Communication Engineering,Volume 3, Issue 5, pp 4590-4600, May 2015, ISSN (Print) : 2320 – 9798,ISSN (Online) : 2320 – 9801,on “An Energy efficient virtual machine consolidation in cloud computing”.

6. International Journal of Computer Engineering & Technology (IJCET), Volume 06, Issue 05, pp 24-35, May (2015), ISSN Print: 0976- 6367,ISSN Online: 0976-6375, on “Performance analysis of an energy efficient virtual machine consolidation algorithm in cloud computing”.

Paper presented at National & International Conferences

Details of Publication
National:-
1. National Conference “NCETET-2011” on “Web Engineering: Introduction and Perspective” at Mumbai on 11th March 2011.

2. “NACCTC-2010” on “Performance analysis of Blowfish Algorithm: Achieving Security through Data Encryption” at Jodhpur on 20th and 21st March 2010.

3. National Conference “NCACT-2010” on “network Security: Radius An Excellent weapon against Crackers” at Rangareddy on 26th and 27th March 2010.

International (In India):-
1. International Conference “ICCIA-2011” on “Cryptographic Approach to Privacy Preserving Data Mining” at Nashik on 11th -12th  Feb 2011.

2. International Conference “ICOST-2011” on “Blowfish Algorithm: A Cryptographic Technique” at Dhule on 13th -15th  Jan 2011.

3. International Conference “ICOST-2011” on “Semantic Web:OWL” at Dhule on 13th -15th  Jan 2011.

4. International Symposium “ISAC-2011” on “Enhancing the Performance of Blowfish Algorithm to achieve more security” at Lucknow on 26th -27th  March 2011.

International (Abroad):-
1.
2.

 

Mr Dilip Budhawant


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Swapnali Nimbalkar , Dilip K.Budhwant, “Type Ahead Search using SQL – Queries in Database” International journal of Emerging Technology and Computer Science ISSN 2455-9954, Volume: 1 Issue: 4 November 16
2.  Prof. Dilip Budhwant, Bhagyashri Bhalekar,” Topological Conditions for Maintaining Stabilization of Dynamic System”, International Journal of Advanced Research in Computer and Communication Engineering ISSN (Online) 2278-1021 (IJARCCE) ISSN (Print) 2319 5940 Vol. 6, Issue 2, February 2017
3. Varsha Ajith,  D.K.Budhwant,” Wavelet based Compression of Hyper Spectral Image cube using Tensor Decomposition”, International Journal of Engineering Research in Computer Science and Engineering (IJERCSE) Vol 3, Issue 6, June 2016  
International:-
1. Nil

Paper presented at National & International Conferences

Details of Publication
National:-
1. Nil
International (In India):-
1.Nil
International (Abroad):-
1. Nil

 

Mr Sujeet More


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1.
2.

International:-
1. Achieving Cloud Security using Third Party Auditor, MD5 and Identity-Based Encryption (ISBN:978-1-5090-1666-2/16/$31.00 ©2016 IEEE)

2. Differential Authorization duplicate check with Hybrid Cloud approach(Global Journal of Advanced Engineering Technologies Volume 5, Issue 2- 2016 ISSN (Online): 2277-6370 & ISSN (Print):2394-0921)

 

Paper presented at National & International Conferences

Details of Publication
National:-
1.
2.

International (In India):-
1.Handling computers through Hand Gesture Recognition
2.

International (Abroad):-
1.
2.

Research MECH

Mechanical Engineering

Dr. M. S. Kadam


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-01

  1. Optimization of the Machining Process Parameters using Genetic Algorithms,
    Journal of Manufacturing Technology Today,  Central Manufacturing Technology Institute, Tunkar Road, Bangalore, India, Volume 6, Issue 6. pp10-15.

International:-16

  1. “Literature Review on Shot Peening”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 6, June 2016.
  2. “Process Parameter optimization for shot peening process”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 6, June 2016.
  3. “Numerical Simulation of Bird Strike Damage Prediction in Single Piece Windshield”, International Journal of Scientific & Engineering Research, Volume 7, Issue 6, June-2016, ISSN 2229-5518.
  4. “Experimental Investigation of Machining Parameter for Micro Hole Drilling on Titanium Wrought Alloy”, IJISET - International Journal Of Innovative Science, Engineering & Technology, Vol. 2 Issue 5, May 2015.
  1. “Optimization of Critical Processing Parameters for Plastic Injection Molding of Polypropelene for Enhanced Productivity and Reduced Time for New Product Development”,    IJMET, Vol. 5, Issue 1, January-2014,pp.108-115.   
  2. “Optimization of Process Parameters of Plastic Injection Molding for Polypropelene to Enhance Productivity and Reduce Time for Development”, IJMET, Vol. 5, Issue 5, May-2014,pp.150-162.  

      

  1. “Modeling and Analysis of Effects of Machining Parameters on MRR in EDM Process of Copper Tungsten MMC”, Intl. Journal of Engg. Research and Technology (IJERT), June' 2014 . 

                     

  1. “Analysis & Optimization of Machining Parameters for Ra in EDM Process of Cu-W MMC”,  Intl. Journal of Mech. Engg. And Information Technology (IJMEIT), June'  2014 . 
  1. “Optimization of Critical Processing Parameters for Plastic Injection Molding for Enhanced Productivity and Reduced Time for Development”,  IJMET, Vol. 4, Issue 6, Nov-Dec(2013),pp.223-226.    

                  

  1. “Comparative Study of Responses of Resistance Spot Welding Obtained From Genetic Algorithm, “Response Surface and D-Optimal Method”, Intl. Journal of Engg. Science and Innovative Technology IJESIT, Intl. Journal of Scientific & Engineering Research,  Vol. 4, Issue 8, August-2013.

 

  1.  Mathematical Modelling and Analysis of Machining Parameters in WEDM for Wc-10% Co Sintered Composite”, Intl. Journal Of Scientific & Engineering Research Vol. 4, Issue 8, August-2013.    
  1.  “Effect of Heat Input and Speed of Welding on Distortion in MIG Welding”, International Journal of Industrial Engineering Research and Development (IJIERD), Volume 3, Issue 2.                                                
  2.  Comparative performance of wet and near-dry EDM process for machining of oil hardened non sinking steel material, IJMET, Volume 3, Issue 2, May-August (2012), pp. 13-22.

 

  1. Investigation of MRR in WEDM for WC-Co Sintered Composite, IJMET, Vol.4,Issue 3, May-June 2013, pp. 349-358.              
  2.  Effect of the Welding Process Parameter in MMAW for Joining of Dissimilar Metals and Parameter Optimization Using Artificial Neural Fuzzy Interface System, Vol.4,Issue 2, March-April 2013, pp. 79-85.

                            

  1.  Finite Element Model to Predict Residual Stresses in MIG Welding, IJMET, Vol.3,Issue 3, Sept-Dec 2012, Pp. 350-361.

Paper presented at National & International Conferences

Details of Publication
National:-04

  1. Cutting Speed Maximization of High Chromium High Carbon Die Steel Material using Genetic Algorithm, National Conference Sun Rising Technologies, organized by Parshwanath College of Engineering Thane Mumbai, Maharashtra, India, November 18-19, 2005.
  2. A systematic Approach to Concurrent Product Design, National Conference Sun Rising Technologies, organized by Parshwanath College of Engineering Thane, November 18-19, 2005.
  3. Optimal Cutting Conditions for Single Pass Machining in Wire Electrical Discharge Machining Process by using Genetic Algorithm, National Conference on Computational Science and Information Processing,  organized by Information Technology Department, JNEC, Aurangabad, Jawaharlal Nehru Engineering College, Aurangabad, Maharashtra, India, April 1-3, 2005
  4. Optimization of Wire Electrical Discharge Machining Process Parameters by using ROVOP and Simplex Search Technique, National Conference on Computational Science and Information Processing,  organized by Information Technology Department, JNEC, Aurangabad, Jawaharlal Nehru Engineering College, Aurangabad, Maharashtra, India, April 1-3, 2005.

International:-12

  1. “Scope of Online Shopping in India”, ‘IIIE Journal  58th National Convention of Indian Institution of Industrial Engineering and International Conference on Smart strategies for digital world- Industrial Engineering Perspective, 21-22 Oct. 2016.
  2. “Framework of Green SCM”,  IIIE 3rd  International Conference On SCM, 28-30 th Nov-2014.
  3. Experimental Analysis of Coated and Uncoated Twist Drill Icame-2011 International Conference on Advances In Mechanical Engineering, SVNIT, Surat, Gujarat, India, June 6-8,   2011.
  4. EEffect of Cutting Conditions on Surface Roughness and Cutting Speed During Machining of HSS In Wire-Cut Electrical Discharge Machining Process, Eighth International Conference on Operations And Quantitative Management Organized by The Association of Indian Management Scholars International AIMS  on the theme: Emerging Perspectives Of Decision Making In A New Globalized World: Theory, Practice And Future Directions, Assumption University, Bangkok, Thailand, October 17-20,2007.
  5. Experimental Investigation into the Machining Parameters in WEDM Process, Seventh International Conference on Operations and Quantitative Managements organized by The Association of Indian Management Scholars International AIMS on the Theme: Decision Making: Art or Science,  Mansingh Hotel, Jaipur, Rajasthan, India, August

                        3-5, 2006.

  1. Criticality Assessment of Metal Cutting Parameters Using Analytical Hierarchy Process and Digraph, Seventh International Conference on Operations and Quantitative Managements organized by The Association of Indian Management Scholars International AIMS on the Theme: Decision Making: Art or Science, Mansingh Hotel, Jaipur, Rajasthan, India, August 3-5, 2006.
  2. Optimal Cutting Conditions in Wire Electrical Discharge Machining Process Using Linear Programming, Seventh International Conference on Operations and Quantitative Managements organized by The Association of Indian Management Scholars International AIMS on the Theme: Decision Making: Art or Science,  Mansingh Hotel, Jaipur, Rajasthan, India, August 3-5, 2006.
  3. Analysis of Process of Centreless Grinding Machine for Betterment of Production, Seventh International Conference on Operations and Quantitative Managements organized by The Association of Indian Management Scholars International AIMS on the Theme: Decision Making: Art or Science,   Mansingh Hotel, Jaipur, Rajasthan, India, August 3-5, 2006.
  4. Investigation into the Machining Parameters in Metal Inert Gas Welding Process, Seventh International Conference on Operations and Quantitative Managements organized by The Association of Indian Management Scholars International AIMS on the Theme: Decision Making: Art or Science,  Mansingh Hotel, Jaipur, Rajasthan, India, August 3-5, 2006.

                   

  1. IInvestigation into the machining parameters in wire cut electrical discharge machining process, ICAMTM 2007, International Conference on advances in manufacturing & technology management-2007 organized by Parshvanath College of Engineering, Thane(W) Mumbai in association with University of Mumbai, Mumbai, India, January 18-20, 2007.
  2. PPrediction of Surface Roughness and Material Removal Rate of Surface Grinded Jobs Through RSM Based Models, ICAMTM 2007, International Conference On Advances In Manufacturing & Technology Management-2007 Organized By Parshvanath College Of Engineering, Thane(W) Mumbai In Association With University Of Mumbai, Mumbai, India, January 18-20, 2007.
  1.  “Framework of Green supply chain management,” 3rd International conference on supply chain management, Best practices in supply chain management. (BPSCM – 2014), 28th to 30th Nov 2014. IIIE Udaipur Chapter, Udaipur.

 

 Dr A. B. Kulkarni


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
Nil
International:-
1) Investigation for development of new tool in DFX shell through literature survey: Design for TPM, Abhay B. Kulkarni, Dr. B.M. Dabade, International Journal of Design and Manufacturing Technology, p-ISSN:0976-6995, e-ISSN:0976-7002, 4(1), pp. 14-29, 2013.
2) Investigation of human aspect in total productive maintenance (TPM): Literature review, International Journal of Engineering Research and Development, Abhay B. Kulkarni, Dr. B.M. Dabade, International Journal of Production technology and Management, p-ISSN:0976-6383,e- ISSN:0976-6391, 5(10), pp. 01-10, 2013
3) Relative Loss Analysis in Small-Scale Industries within the Proposed Marathwada Auto Cluster in India, International Journal of Production Technology and Management, Dr. B.M. Dabade, International Journal of Engineering Research and development, p-ISSN:2278-067X, e-ISSN:2278-800X, 5(10), pp. 27-6, 2013.

Paper presented at National & International Conferences

Details of Publication
National:-
1) Structural Synthesis of Kinematic Chains – Application of CLAM along with Secondary Hamming String, Abhay B. Kulkarni, Ramakant K. Shrivastava, Proceedings of 12 th National Conference on Machines and Mechanisms (NaCoMM-2005), IIT Guwahati, Published by Association of Machines and Mechanisms, pp. 74-81,December 16-17, 2005.
2) Man-Machine Interaction with Special Emphasis on Design of Equipment, Abhay B. Kulkarni, Dr. B. M. Dabade, Proceedings of the National Conference on Advances in Engineering Design, BAIT, Sathyamangalam, Vol. 1, pp. 12-17,April 29-0, 2005.
3) Study of Failure Mode Effect and Criticality Analysis with Reference to Design of Equipment, Abhay B. Kulkarni, Dr. B. M. Dabade, Proceedings of the National Conference on Advances in Engineering Design, BAIT, Sathyamangalam, Vol. 2, pp. 817-820, April 29-30, 2005.

International (In India):-
1) Innovations in Supply Chain Management, Rucha R. Bodkhe , Rishi A. Muley, Dr. Abhay B. Kulkarni, Proceedings of 3 rd International Conference on Supply Chain Management on Best Practices in Supply Chain Management Industrial Engineering BPSCM-2014, Udaipur, VOLUME 1, Excellent Publishing House, ISBN: 978-93-84935-56-6,912-916, November 28–30, 2014.
2) Factors Affecting Cycles of Supply Chain Management, Charudatt Belsare, Sushrut Karmarkar, Dr. A. B. Kulkarni, Proceedings of 3 rd International Conference on Supply Chain Management on Best Practices in Supply Chain Management Industrial Engineering BPSCM-2014, Udaipur, VOLUME 1, Excellent Publishing House, ISBN: 978-93-84935-56-6,912-916, November 28–30, 2014.
3) Value Stream Mapping: A Continuous Improvement Tool, B.P. Chaudhary, S.V. Tipare, A.B. Kulkarni, Proceedings of 57th National Convention of Indian Institution of Industrial Engineering & 3 rd International Conference on Industrial Engineering ICIE 2015, Surat, VOLUME 1, Excellent Publishing House, ISBN: 978-93-84935-56-6,1198-1201, November 26–28, 2015.

4) QFD as a Strategic Planning Tool, S.S. Patwari, P.R. Firodiya, A.S. Trifaley, A.B. Kulkarni, Proceedings of 57th National Convention of Indian Institution of Industrial Engineering & 3 rd International Conference on Industrial Engineering ICIE 2015, Surat, VOLUME 1, Excellent Publishing House, ISBN: 978-93-84935-56-6,328-32, November 26–28, 2015.
5) Study of Simulation and Modeling of Brake System in Vehicles Working on ABS, A. S. Joshi, P. U. Kakde, S. D. Kate, A.B. Kulkarni, Proceedings of 57th National Convention of Indian Institution of Industrial Engineering & 3 rd International Conference on Industrial Engineering ICIE 2015, Surat, VOLUME 1, Excellent Publishing House, ISBN: 978-93-84935-56-6,907-911, November 26–28, 2015.
6) A Quarter-Car Suspension System: Study of Simulation and Analysis of Passive and Active Suspension System for Non Uniform Road Profile, P. U. Kakde, A. S. Joshi, S.D. Kate, A.B. Kulkarni, Proceedings of 57th National Convention of Indian Institution of Industrial Engineering & 3 rd International Conference on Industrial Engineering ICIE 2015, Surat, VOLUME 1, Excellent Publishing House, ISBN: 978-93-84935-56-6,912-916, November 26–28, 2015.
7) Critical Chain Project Management, Nikhil Ingle, Sarfraz Ali Quadri, Dr. A.B. Kulkarni, Proceedings of 58 th National Convention of Indian Institution of Industrial Engineering & International conference on Smart Strategies for Digital World – Industrial Engineering Perspective, Nagpur, Published by IIIE Nagpur Chapter and SRCEM Nagpur, ISBN: 978-93-83164-52-3,ICP019, October 21–22, 2016.
8) Design and Optimization of Gears Used in BAJA ATV, Antriksh Mutha, Mohit Sonanis, Shubham Thosar , Dr. A. B. Kulkarni, Proceedings of 58 th National Convention of Indian Institution of Industrial Engineering & International conference on Smart Strategies for Digital World – Industrial Engineering Perspective, Nagpur, Published by IIIE Nagpur Chapter and SRCEM Nagpur, ISBN: 978-93-83164-52-3,ICP020, October 21–22, 2016.
9) Cloud Computing in Supply Chain Management, Shweta Sabnis, Drishti Bindra, Dr. A. B. Kulkarni, Proceedings of 58 th National Convention of Indian Institution of Industrial Engineering & International conference on Smart Strategies for Digital World – Industrial Engineering Perspective, Nagpur, Published by IIIE Nagpur Chapter and SRCEM Nagpur, ISBN: 978-93-83164-52-3,ICP21, October 21–22, 2016.
10) Cloud Computing in Manufacturing, Drishti Bindra, Shweta Sabnis, Dr. A. B. Kulkarni, Proceedings of 58 th National Convention of Indian Institution of Industrial Engineering & International conference on Smart Strategies for Digital World – Industrial Engineering Perspective, Nagpur, Published by IIIE Nagpur Chapter and SRCEM Nagpur, ISBN: 978-93-83164-52-3,ICP22, October 21–22, 2016.

International (Abroad):-
Nil

 

Dr Vinita Joshi


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1.Wear and frictional characteristics of some polymeric materials for gears used in machine tools. (Ist prize, GOLD medal  on production Division , IEI, 2012
2.Comparative study of contact deformation of filled and unfilled polymeric materials
3 Contact deformation an influencing parameter.
4 Suitability of Disc Brake Rotor Design for Maximum Heat Dissipation by using FEA
5 Performance Evaluation and Optimization of Tie Rod in Suspension System of Car for a Buckling Study using Theoretical and Experimental Approach  IJSRD - International Journal for Scientific Research & Development| Vol. 3, Issue 11, 2016 | ISSN (online): 2321-0613
6  Performance Evolution of Tie Rod in Suspension System of Car using Finite Element Approach IJSRD - International Journal for Scientific Research & Development| Vol. 3, Issue 11, 2016 | ISSN (online): 2321-0613
7 Suitability of disc brake rotor design for maximum heat dissipation by using FEA,
 Shruti S Puranik1, Dr Ms V S Joshi2, ICMIE, Sept.2017
8 Design modification of disc brake rotor to reduce weight and increase heat dissipation by using finite element analysis, VOL. 2, VISTA 2017

International:-
1. Water from Atmosphere, V. S. Joshi and Arvind Chel, national conference on advances in refrigeration and cryogenics, June 10-12,2016,Venue: seminar hall, MGM’s COET, Navi Mumbai

 

2.

Paper presented at National & International Conferences

Details of Publication
National:-
1.Monte-Carlo simulation in measuring of wear of gears made MoS2 filled polymers,
COPEN, Pune.DEC.2012
2. “Scope of Online Shopping In India,” 58th  National Convention of Indian Institution of Industrial Engineering &  International Conference on Smart strategies for digital world - Industrial Engineering perspective: 21-22 Oct 2016 at Shri  Ramdeobaba college of Engineering & Management, Nagpur


International (In India):-
1. “Scope of Online Shopping In India,” 58th  National Convention of Indian Institution of Industrial Engineering &  International Conference on Smart strategies for digital world - Industrial Engineering perspective: 21-22 Oct 2016 at Shri  Ramdeobaba college of Engineering & Management, Nagpur

2.

International (Abroad):-
1.
2.

 

Dr Arvind Chel


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- 00
International:- 22 (Indexed quality publications majority from Elsevier Journals as follows)

  1. Arvind Chel and Geetanjali Kaushik, (2017) Renewable energy technologies for sustainable development of energy efficient building, Alexandria Engineering Journal, (in press). (Elsevier Pub.)
  2. Geetanjali Kaushik, Arvind Chel, Sangeeta Shinde and Ashish Gadekar, (2016) Measurement and control measures for PM10 concentration in Aurangabad, Maharashtra (India), Vista International Journal on Energy, Environment and Engineering, 1(1): 1-8.
  3. Geetanjali Kaushik, Arvind Chel, Sangeeta Shinde and Ashish Gadekar, (2016) Assessment of PM10 in Aurangabad City of Central India, International Journal of Environment, 5(2): 61-64. (Elsevier Pub.)
  4. Arvind Chel, Arnold Janssens, Michel De Paepe, (2015) Thermal performance of a nearly zero energy passive house integrated with the air–air heat exchanger and the earth–water heat exchanger, Energy and Buildings, 96: 53-63. (Elsevier Pub.)
  5. Arvind Chel, (2014) Performance of skylight illuminance inside a dome shaped adobe house under composite climate at New Delhi (India): A typical zero energy passive house, Alexandria Engineering Journal, 53(2): 385-397. (Elsevier Pub.)
  6. Geetanjali Kaushik and Arvind Chel, (2014) Micro-bubble Technology: An Emerging field for water treatment, Bubble Science, Engineering and Technology, 5(1-2): 33-38.
  7. Apte J.S., Thomas W.K., Alexander H.R., Deshpande S.J., Kaushik G, Arvind Chel, Julian D. Marshall and William W. Nazaroff, (2011) “Concentration of fine. Ultrafine, and black carbon particles in auto-rickshaws in New Delhi”, India, Atmospheric Environment 45: 4470-4480. (with Prof. of UC Berkley, USA) (Elsevier Pub.)
  1. Arvind Chel and G.N.Tiwari, (2011) “A case study of a typical 2.32 kWP stand-alone photovoltaic (SAPV) in composite climate of New Delhi (India)”, Applied Energy 88(4):1415-1426. (Elsevier Pub.)
  2. Arvind Chel and Geetanjali Kaushik (2011) “Renewable energy for sustainable agriculture: A Review”, International Journal of Agronomy for Sustainable Development, 31:91–118. (www.agronomy-journal.org) (DOI: 10.1051/agro/2010029).
  3. Arvind Chel, G.N.Tiwari and H.N.Singh (2010) “A modified model for estimation of daylight factor for skylight integrated with dome roof structure of mud-house in New Delhi (India)”, Applied Energy, 87(10): 3037-3050. (Elsevier Pub.)
  4. Arvind Chel and G.N.Tiwari (2010) Stand-alone photovoltaic (PV) integrated with earth to air heat exchanger (EAHE) for space heating/cooling of adobe house in New Delhi (India), Energy Conversion and Management, 51(3): 393-409. (Elsevier Pub.)
  5. Arvind Chel and G.N. Tiwari (2009) Performance evaluation and life cycle cost analysis of earth to air heat exchanger integrated with adobe building for New Delhi composite climate, Energy and Buildings, 41(1): 56-66. (Elsevier Pub.)
  6. Arvind Chel, G.N.Tiwari and Avinash Chandra (2009) Simplified method of sizing and life cycle cost assessment of building integrated photovoltaic system, Energy and Buildings, 41(11): 1172-1180. (Elsevier Pub.)
  7. Arvind Chel and G.N.Tiwari (2009) “Thermal performance and embodied energy analysis of a passive house–case study of vault roof mud-house in India”, Applied Energy, 86(10): 1956–1969. (Elsevier Pub.)
  8. Arvind Chel, G.N.Tiwari and Avinash Chandra (2009) “A model for estimation of daylight factor for skylight: An experimental validation using pyramid shape skylight over vault roof mud-house in New Delhi (India)”, Applied Energy, 86(11): 2507-2519. (Elsevier Pub.)
  9. Arvind Chel, G.N.Tiwari and Avinash Chandra (2009) Sizing and cost estimation methodology for stand-alone residential PV power system, International Journal of Agile Systems and Management, 4(1/2): 21-40.

(http://solarindiaonline.blogspot.com/2009/02/sizing-and-cost-estimation-methodology.html)

  1. Arvind Chel (2009) “Building integrated renewable energy technologies: Embodied energy, economic analysis and potential of CO2 emission mitigation”, International Journal of Energy, Environment and Economics,17(2/3):1-26(Nova Science Pub, Inc).
  2. Tiwari, G.N., Dimri V. and Arvind Chel (2009) "Parametric study of an active and passive solar distillation system", Desalination, 242: 1-18. (Elsevier Pub.)
  3. Arvind Chel, J K Nayak and Geetanjali Kaushik (2008) Energy conservation in honey storage building using Trombe wall, Energy and Buildings, 40(9): 1643-1650. (Elsevier Pub.)
  4. Tiwari, G.N., Dimri V and Arvind Chel (2008) "Exergetic analysis of passive and active solar stills", International Journal of Exergy, 5(3): 360-373.
  5. Shivani Chaturvedi, Santosh Satya, Geetanjali Kaushik, Arvind Chel, (2008) Viable Tailored Organic Fertilizer Alternatives From Waste Produced by Bio-Diesel Extraction Process and Tobacco Industry, ASME 2008 Proceeding on 2nd International Conference on Energy Sustainability, American Society of Mechanical Engineers, 233-234.
  1. Tiwari G.N., Dimri V, Singh, U., Arvind Chel and Sarkar B.(2007) “Comparative thermal performance evaluation of an active solar distillation system”, International Journal of Energy Research, 31(15): 1465-1482.

Paper presented at National & International Conferences

Details of Publication
National:- 03
List of National Conferences (3 numbers till date May 14, 2017)

  1. Arvind Chel, Investigation of 10 kWP thin film grid connected photovoltaic roof top system at JNEC, Aurangabad, Feb. 10-11, 2012 National Conference on Green Engineering and Environment Pollution, Aurangabad (Maharashtra).
  2. Arvind Chel, Nearly Zero Energy House with Smart Air Handling Unit for Heating and Cooling Room Air at Belgium, June 10-12, 2016, National Conference on advances in refrigeration and cryogenics NCARC-2016, MGM College of Engg. And Tech., Kamothe, Navi Mumbai.
  3. V.S. Joshi and Arvind Chel, Water from Atmosphere, June 10-12, 2016, National Conference on advances in refrigeration and cryogenics NCARC-2016, MGM College of Engg. And Tech., Kamothe, Navi Mumbai.

International:- 16+04= 20 (Total)
International (In India):- 16 (IIT Delhi, IIT Madras, Varanasi, Jaipur, New Delhi, Agra, Dehradun)
International (Abroad):- 04 (Ghent, Belgium, Brussels, Belgium, Linkoping, Sweden and Florida, USA)
List of International Conferences Publications (20 numbers till date May 14, 2017)

  1. Arvind Chel, Om Prakash and G.N.Tiwari "Performance evaluation and economic analysis of PV integrated Mudhouse for composite climate" in SOLARIS 2007, 3rd International Conference at IIT Delhi, Feb.7-9, 2007. (Best Paper Award)
  2. Shivani Chaturvedi, Geetanjali Kaushik, Arvind Chel and Santosh Satya, Code 54177, Viable Tailored Organic Fertilizer Alternatives from Waste Produced by Bio-Diesel Extraction Process and Tobacco Industry, ASME 2nd International Conference on Energy Sustainability held on August 10-14, 2008 at Jacksonville, Florida, together with the ASME Fluids, Heat Transfer, Energy, and Solar conferences, American Society of Mechanical Engineers, 233-234.
  3. Arvind Chel, G.N.Tiwari and A. Chandra, Code: SPV-Oral-011, "Sizing and costing methodology of solar photovoltaic power system", Renewable Energy Asia 2008 – An International Conference & 4th SEE Forum Meeting, Dec. 11-13, 2008 at IIT Delhi (India), (Chapter 56, pp.454-462 in Conference Proceedings).
  4. Arvind Chel (2009). Zero Emissions Research and Initiatives: Low Energy Buildings for Sustainable Development, International Conference on Combating Challenges of Climate Change, February, 7-9, 2009, Vigyan Bhawan, New Delhi.
  5. Geetanjali Kaushik, Arvind Chel, Shivani Chaturvedi (2010) Particulate Matter Pollution- A Silent Killer in Indian Cities, International Conference on Environmental Education, ICEED-2010, July 2-4, 2010 held at Dayalbagh Education Society, Agra, India.
  6. Shivani Chaturvedi, Arvind Chel, Geetanjali Kaushik (2010), Energy saving potential of organic fertilizer and pesticide alternatives from biomass wastes, International Conference on “Clean Energy Technologies And Energy Efficiency For Sustainable Development” ENERSTATE-2010, October 3-5, 2010 at Dehradun, Uttrakhand, India.
  7. Arvind Chel and G.N.Tiwari, “0196-LEA-Modeling of Skylight on Dome Shaped Roof of Low Energy Adobe House Located in New Delhi (India)” World Renewable Energy Congress-2011, Sweden, May 8-11, 2011, Linkoping, Sweden.
  8. Arvind Chel, Paper ID: ISHMT_IND_17_004, “Underground temperature for heating/cooling of room air”, Proceedings of the 21st National and 10th ISHMT-ASME Heat and Mass Transfer International Conference, Dec. 27-30, 2011, IIT Madras, India.
  9. Arvind Chel, G.N.Tiwari and A. Chandra, Code: RES05, “Renewable Energy Technologies Integrated with Mudhouse”, SOLARIS-2012 International Conference, Feb.7-9, 2012, Organised by IIT Delhi in collaboration with Bag Energy Research Society at Varanasi, U.P. (India) pp. 29-30.
  10. Arvind Chel Michel Paepe and Arnold Janssens, Zero Energy Building, ‘Towards improved compliance and quality of the works for better performing buildings’ on Sept. 30, 2014 International Conference held at Brussels, Belgium organized by International Network for Information on Ventilation and Energy Performance (INIVE) EEIG.
  11. Arvind Chel Michel Paepe and Arnold Janssens, Energy Performance of Zero Energy Building, International Conference, DYNASTEE ‘Real building energy performance assessment’ on 16 April 2014 held at Ghent, Belgium organized by International Network for Information on Ventilation and Energy Performance (INIVE) EEIG.
  12. Shubhangi Gore & Arvind Chel, ID 79 Production of agro waste charcoal briquettes, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  13. Diksha Bokade & Arvind Chel, ID 106 ID 106 Solar thermal power plant using parabolic dish concentrator in India, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  14. Manisha Hiwale & Arvind Chel, ID 106 ID 121 Solar absorption refrigeration, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  15. Rushikesh Karale & Arvind Chel, ID 106 ID 128 Power generation using floating offshore wind turbines in India, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  16. A.V.Wavre & Arvind Chel, ID 106 ID 96 Socio-economic policy for e-waste management using reverse logistic network, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  17. Sumit Khamgaonkar & Arvind Chel, ID 116 Geothermal air conditioning in India, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  18. Rucha Naik & Arvind Chel, ID 131 Emerging global trend in production: A study of sustainable manufacturing in fabrication industry, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  19. Sneha Patil & Arvind Chel, ID 158 The environmental Kuznets curve: Interdependence of Environment & Economics, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)
  20. Mohit Tonpe, Juilee Mahajan, Rucha Naik & Arvind Chel, ID 165 Tidal energy-A promising future, International Conference on  New and Renewable Energy Resources for Sustainable Future Feb 2-4, 2017, Dept. of Mechanical Engg., SKIT, Jaipur (ICONRER 2017)

International Book Chapters: 03

Geetanjali Kaushik, S.S. Patil, Poonam Singhal, Arvind Chel, (2016), Overpopulation and Its Association with Natural Disasters: A Case Study of Indian Tsunami, 2004, Publication on Dec 12, 2016, Chapter 11, Book on Environmental Issues Surrounding Human Overpopulation, Book series on advances in Environmental Engineering and Green Technologies (AEEGT), IGI Global, USA pp.189-201(ISBN9781522-516835) (www.igi-global.com/chapter/overpopulation-and-its-association-with-natural-disasters/173313). Geetanjali Kaushik, Arvind Chel, Ashish Gadekar, (2017) Methods of Pesticide Residues Reduction in Grains, Book on Pesticide Residue in Foods, Chapter 7, Springer International Publishing, Publication on April 15, 2017, pp.119-133.( ISBN 9783319-526812) (https://link.springer.com/chapter/10.1007%2F978-3-319-52683-6_7). Arvind Chel (2009), “Building integrated renewable energy technologies: Embodied energy, economic analysis and potential of CO2 emission mitigation” Chapter 8, Edited by Joseph B. Utrick, Energy and Buildings: Efficiency, Air Quality and Conservation, Nova Science Publishers: New York, USA pp. 209-234 (www.novapublishers.com).

National Book Chapters: 04,

Kartik Porwal, Arvind Chel & Geetanjali Kaushik, ID 1 Creating Security Systems for Make in India, “Make In India” Through Sustainable Development: Achieving inclusive growth, Book Chapters Published on March 2016 by Bharati Vidyapeeth Deemed  University, IMR, New Delhi ISBN: 978-93-85000-59-1 Kalyani Patil, Surabhi Sanghai, Shweta Yeole, Suchita Sonwane and Arvind Chel, ID 11 Study of the Photovoltaic Drying device and its applications in drying agricultural products, “Make In India” Through Sustainable Development: Achieving inclusive growth, Book Chapters Published on March 2016 by Bharati Vidyapeeth Deemed  University, IMR, New Delhi ISBN: 978-93-85000-59-1 Saniya Nautiyal, Arvind Chel & Geetanjali Kaushik, ID 13 Role of research & Development for Make in India: A case study of DRDO, “Make In India” Through Sustainable Development: Achieving inclusive growth, Book Chapters Published on March 2016 by Bharati Vidyapeeth Deemed  University, IMR, New Delhi ISBN: 978-93-85000-59-1 Shubham R. Ugale, Shweta D. Kate, Sampada V. Kakde and Arvind Chel, ID 33 Electric vehicles: Creating Eco-system, “Make In India” Through Sustainable Development: Achieving inclusive growth, Book Chapters Published on March 2016 by Bharati Vidyapeeth Deemed  University, IMR, New Delhi ISBN: 978-93-85000-59-1 International Book: 01
  1. Arvind Chel (2012), “Thermal Model: Adobe House, Earth-Air Heat Exchanger, Skylight & PV: The Sun-Earth Angles, Thermal Performance, Periodic Analysis, Sol-Air Temperatures, Programs & Passive Building Concept”, June 25, 2012, Lambert Academic Pub., Germany.

 

 

Dr Dhananjay Dolas


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1.
2.

International:-

  1. D.R.Dolas, M.D. Jaybhaye, Sudhir. D. Deshmukh, “Reliability Analysis of Cooling System Water Pump - A Case Study,” International conference on modeling and simulation (ICMSET-2014), 15-16 February 2014, Godavari College of Engineering, Jalgaon, International Journal of Advanced Electronics & Communication Systems Approved by CSIR-NISCAIR ISSN NO: 2277-7318,  Issue 3, Vol 3,  June - July2014,
  2.  D.R.Dolas, M.D. Jaybhaye, Sudhir. D. Deshmukh, “Prediction of Repair & Maintenance costs of Diesel Engine,” International Journal of Recent Advances in Mechanical Engineering (IJMECH), ISSN 2200 -5854,  Vol.3, No.1, February 2014, pp. 63-69.
  3. D. R. Dolas, M. D. Jaybhaye, S. D. Deshmukh, “Estimation the system reliability using Weibull distribution,” International conference on quality and management (ICQM 2014), 21-22 March 2014, SAISE & NIT, Raipur and International Proceedings of Economics Development and Research, (IPEDR), ISSN 2010-4626, & ISBN 978-981-07 9636 -5, 014, Vol-75, pp.144-148.
  4. D.R.Dolas, S. D. Deshmukh, “A Pareto chart for evaluating cooling system failure frequency,” Proceedings of 3rd International Conference on Recent Trends in Engineering & Technology (ICRTET’2014), 28-30 March 2014, SNJB’s Late Sau. K.B. Jain college of Engineering, Chandwad, Nashik. Published By in Elsevier Science and Technology, pp 283-287 http://www.elsevierst.com/conference proceeding book.php
  5. D. R. Dolas, S. D. Deshmukh , “ Estimation of lubrication system reliability,” All India Seminar on Opportunities & Challenges in Product Life Cycle Management The Institution of Engineers (India), Pune, Local Centre, & Department of Production Engineering & Industrial Management, College of Engineering, Pune-4110057.

Technical journal of The Institution of Engineers (India), Pune, Local Centre, Vol. 38 NOV 2014, ISBN No: 978-81-924990-2-4. pp 329-338.

  1. D. R. Dolas, S. D. Deshmukh, “Reliability Analysis of Cooling System of Diesel Engine,” Int. Conf. on Industrial, Mechanical and Production Engineering: Advancements and Current Trends MANIT, Bhopal, November 27-29, 2014. ISBN: 978-93-84935-03-0 pp 568-573, and Universal Journal of Mechanical Engineering , ISSN 2332-3353,2332-3361(Online),3(2), pp57-62,2015, Horizon Research  Publishing,,www.hrpub.org, DOI:10.13189/ujme.2015.030205,
  2. D. R. Dolas, S. D. Deshmukh, “Determination of Appropriate Time for Diesel Engine Replacement based on Maintenance Cost,” 2014 NIT-MTMI International conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues Organized by, National Institute of Technology, Hamirpur, Modern Technology & Management Institute Inc. USA, University of Maryland, Eastern Shore, USA, College of Business, Frostburg State University, Frostburg, MD, USA, December 22-24, 2014. Review of Business & Technology Research (RBTR) ISSN 1941-9414, Volume 11, Number 1, December 2014, pp 68-73.
  3. Nitin G. Phafat, R.R. Deshmukh, D. R. Dolas  Dr. Sudhir D. Deshmukh ,” Enhancement of Overall Equipment Effectiveness of Le Cutting Machine At NRB Bearing.,” International Journal of Emerging Technologies and  Applications in Engineering , Technology and Sciences,  ISSN :0974- 3588, Vol 4, Issue 1, Jan- June 11,  pp130- 139.
  4. M. M. Patunkar, D. R. Dolas “Modelling and Analysis of Composite Leaf Spring under the Static Load Condition by using FEA” International Journal of Mechanical & Industrial Engineering, ISSN 2231- 6477, Volume 1 Issue 1-2011, pp 1-4.
  5.  Gurav R.D, Dolas D. R., “Integrating Value Stream Mapping Value Analysis and Value Engineering,” International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340 Print / 0976-6359 Online, Vol 3, Issue 3, September - December (2012), pp. 331-336. (Impact factor – 3.8071)Thomson Reuter’s H index 3771-2015
  6.  Gurav R.D, Dolas D. R. “Value Stream Mapping,” International Journal of Industrial Engineering Research and Development, ISSN 0976- 6979 (print)/ 0976-6987 (Online), Vol 4, Issue 1, January - April (2013), pp. 25-33. (Impact factor – 5.1283) Thomson Reuter’s H index 3771-2015
  7. M. M. Patunkar D. R. Dolas, “Experimental Investigation and FEA of Mono Composite Leaf Spring under the Static Load Condition,” International Journal of Mechanical Engineering and Computer Applications, ISSN 2320-6349, Vol 1, Issue 7, December 2013,  pp. 130- 139. (SJIF- 3.244)
  8.  Sarfraz Ali Quadri, Swapneel R. Zende, Dhananjay R. Dolas, “Reliability Estimation using Fault Tree Analysis Method,” International Journal of Engineering Research ISSN: 2319-6890) (online), 2347-5013(print) Volume No.3 Issue No: Special 1, 22nd March 2014,  pp: 160-163, ( GIF- 0.421)
  9.  Kishor N. Naik  & Dhananjay Dolas, “Static Analysis Bending Stress on Gear Tooth Profile by Variation of Gear Parameters with the help of FEA,”  International Journal of Engineering Research & Technology (IJERT), ISSN 2278-0181,  Vol. 3 Issue 6, June – 2014, pp 132-136. (Impact factor –1.76)
  10.  Jagtap  Kuldeep  Kishor & Dolas Dhananjay R, “ PLM based approach for design analysis & manufacturing of a Mug,” All India Seminar on Opportunities & Challenges in Product Life Cycle Management The Institution of Engineers (India), Pune, Local Centre, & Department of Production Engineering & Industrial Management, College of Engineering, Pune-4110057.Technical journal of The Institution of Engineers (India), Pune, Local Centre, Vol. 38 NOV 2014, ISBN No: 978-81-924990-2-4. pp 315-317.
  11. Dattatray Vishnu Wagh, Prof. D. R. Dolas, “  Experimental Investigation of PCM on Inconel 600 Using Response Surface Methodology,”  International Journal of Engineering Research and General Science, ISSN 2091-2730  Volume 3, Issue 1, January-February, 2015, pp 909- 915.( Impact factor – 3.843)
  12. D. V. Wagh, D. R. Dolas, M. D. Dhagate, “ Experimental Investigation of Photochemical Machining of sing Ferric Chloride,”  International Journal of Engineering Research & Technology (IJERT), ISSN 2278-0181,  Vol. 4 Issue 02, February-2015, pp 289-294. ( Impact factor – 1.76)
  13.  Kale N.K, Dolas D. R, “ Optimization of process parameter in electrochemical machining Of Inconel 718 by Taguchi analysis,” International Journal of Engineering Research and General Science , ISSN 2091- 2730, Volume 3, Issue 1, January-February, 2015, pp 1179- 1184. ( Impact factor – 3.843)
  14. Sarfraz Ali Quadri & D. R. Dolas “ Mass Reduction of Involute Spur Gear under Static loading” , American Journal of Mechanical Engineering & Automation, ISSN 2381- 6198 Print / 2381-6201 Online , Vol. 2 Issue 4 2015, pp. 40-43.
  15.  Sarfraz Ali Quadri & D. R. Dolas “Contact Stress Analysis of Involute Spur Gear under static loading,” International Journal of Scientific research Engineering & Technology, ISSN 2278- 0882, Vol. 4 Issue 5 May 2015, pp. 593-596.
  16. Sarfraz Ali Quadri & D. R. Dolas “Effect of Stress Relieving Features on Stresses of Involute Spur gear under Static loading,”  International Journal of Emerging Technologies and Innovative Engineering, ISSN 2394 – 6598 ,  Vol. 1 Issue 5 May 2015, pp. 116-120. ( Impact factor – 2.34)
  17. Sarfraz Ali Quadri & D. R. Dolas “Comparative model analysis of conventional spur gear with modified involute spur gear,” International research Journal of Engineering and Technology, (ISSN 2395-0056/ 2395-0072 Online) Vol. 2 Issue 4, July 2015, pp. 1752- 1756 .
  18. Sarfraz Ali Quadri & D. R. Dolas “Effect of root radii on stress analysis of   Involute spur gear under static loading,”  International Journal of Recent Technologies in Mechanical and Electrical Engineering,  ISSN 2349-7947,  Vol. 2, Issue 5, 2015, pp. 99-103.  ( Impact factor – 2.084)
  19. Sarfraz Ali Quadri & D. R. Dolas “The Stress Analysis of Involute Spur gear under Static Loading,” International Journal of Applied Engineering Research, ISSN 0973-4562,  Vol. 10 No. 11 (2015), pp. 10358-10361.
  20.  Swapneel R. Zende, Mohammed Rafi Shaikh, Dhananjay R. Dolas, “Fillet Radius Optimization of Bell Crank Lever,” International Journal of Modern Trends in Engineering and Research (IJMTER) Volume 2, Issue 7, [July -2015] Special Issue of ICRTET’2015, pp 1947-1953. ( Impact factor – 1.711)
  21.  Sanap Ashok B., Dolas D. R., “Availability analysis of forging press using quality tools,” International Journal of Engineering Research, ISSN 2321-7758, Vol.3, Issue.5, Sept-Oct (2015). ( Impact factor-3.601) pp. 64-73
  22.  Sanap Ashok B., Dolas D. R., “Availability analysis of forging press using Markov model,” International Journal for Research in Technological Studies, ISSN 2348-1439, Vol.2, Issue10, Sept (2015). (Impact factor-0.74), pp 1-5.
  23.  Shubham R. Ugle, Shweta D. Kate, Dhananjay R. Dolas, “Formula One Safety: A Review,” International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072 e-ISSN: 2395 -0056, Volume: 02 Issue: 07, Oct-2015, pp 433-437.  ( Impact factor-2.518)
  24. Kuldeep.K.Jagtap, Dhananjay. R. Dolas, “Simulation of Quarter Car Model Using MATLAB,” International Journal of Engineering Research and General Science Volume 3, Issue 6, November-December, 2015, ISSN 2091-2730,  pp 242 -249 . ( Impact factor – 3.843)
  25. Kuldeep.K.Jagtap, M. P. Nagarkar, Dr.Dhananjay. R. Dolas, “Optimization of Suspension System to Minimize Tire Dynamic Force ,” International Journal for Scientific Research & Development| Vol. 3, Issue 09, 2015 | ISSN (online): 2321-0613 pp, 501 – 504,             ( Impact factor – 2.39)
  26. Gaurav. B. Patil, Dr. Dhananjay R Dolas,  “Green supply chain management: A Review,” International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072 e-ISSN: 2395 -0056 Volume: 02 Issue: 08 , Nov-2015, pp 1095-1099, ( Impact factor – 2.518)
  27. Gaurav. B. Patil, Dr. Dhananjay R Dolas, “Role of third party logistics in supply chain management,” International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Volume: 02 Issue: 08, Nov-2015, pp586-590. ( Impact factor – 2.518).
  28. Dr. Dhananjay. R. Dolas, Kuldeep. K. Jagtap, “Analysis of Coil Spring Used in Shock Absorber using CAE ,” International Journal of Engineering Research ISSN:2319-6890)(online),2347-5013(print) Volume No.5, Issue No.2, pp : 123- 126 1 Feb. 2016. (Thomson Reuters End Note  indexing )
  29. Dattatray Vishnu Wagh1, Dr. D. R. Dolas, “ Multi Response Optimization of Process Parameters in PCM of Inconel 600 Using Desirability Function Approach of RSM,” International Journal of Engineering Research ISSN:2319-6890)(online),2347-5013(print) Volume No.5, Issue No.2, pp : 127- 130 1 Feb. 2016. (Thomson Reuters End Note  indexing )
  30.  Kishor N. Naik and Dhananjay R Dolas, “ Static Analysis of Bending Stresses on Spur Gear Tooth Profile by using Finite Element Analysis & Photo Elastic Technique ,”  International Journal of Current Engineering and Technology, Vol.6, No.1 (Feb 2016), pp284-288.
  31. Nair Sarath R., Maharnwar  Abhijeet S and Dhananjay Dolas.2016, “Significance of Aluminium Alloys In Automobile Engine Components: A Review.,”  Int J Recent Sci Res. 7(2), pp. 8684-8687. (Thomson Reuters indexing )
  32. Dr. Dhananjay R. Dolas, Sarfraz Ali N. Quadri, “Failure Mode & Effect Analysis of Lead Acid Battery,” International Journal of Engineering Sciences & Research Technology, 5(3): March, 2016, ISSN: 2277-9655, (I2OR), Publication Impact Factor: 3.785, pp 251- 256, (Thomson Reuters indexing )
  33. Abhijeet Maharnwar, Sarath Nair, Dr. Dhananjay Dolas , “Comparative study of different materials used for manufacturing of an automobile body,” International Journal of Advanced Engineering Research and Science (IJAERS) Vol-3, Issue-3 , March- 2016] ISSN: 2349-6495 , pp 9-13.ISRA JIF-1.317 PIF-2.465IBI-3.2 SJIF-4.072. (Thomson Reuters indexing )
  34. Ankit V. Gujrathi, Dr. Dhananjay R. Dolas, “ An Overview of Automobile Airbag Defects,” International Journal of Engineering Sciences & Research Technology, 5(3): March, 2016, ISSN: 2277-9655, (I2OR), Publication Impact Factor: 3.785, pp 414- 419, (Thomson Reuters indexing )
  35. Aditya Patwardhan , Indraneel Ray, Dr Dhananjay R Dolas, “ A Comparative Study Between DTS-I Engine and Single Spark Ignition Engine, “ International Journal of Engineering Sciences & Research Technology, ISSN: 2277-9655 , (I2OR), Publication Impact Factor: 3.785,  5(4): April, 2016 pp. 417-421. (Thomson Reuters indexing )
  36. Raktate Omesh, Dhananjay Dolas, “ Optimization of Process Parameters of Friction Stir Welding– Critical Review,”  International Advanced Research Journal in Science, Engineering and Technology, 2nd International Conference on Advances in Mechanical Engineering (ICAME-2016) Amrutvahini College of Engineering, Sangamner , ISSN (Online) 2393-8021 ISSN (Print) 2394-1588,  Vol. 3, Special Issue 1, March 2016 , pp235 – 239.
  37. Raktate Omesh, Dhananjay Dolas,A Review on Tool materials, geometries and welding variables used for Friction Stir Welding,” IJARIIE, Vol-2 Issue-3 2016,  PP 3870-3875, impact factor 4.06 (Thomson Reuters indexing )
  38. Farazuddin Zafaruddin, Dr. Dhananjay R. Dolas, “Experimental Investigation of Organic Brake Pad,” International Journal of Advance Research and Innovative Ideas in Education (IJARIIE) Vol-2 Issue-6 2016, pp 213-219.
  39. Farazuddin Zafaruddin & Dr. Dhananjay R. Dolas, “Transient Structural Analysis of Automotive Disc Brake Pad,” Imperial Journal of Interdisciplinary Research, “Vol-2, Issue-12, 2016, pp666-670.
  40.  Akbar H Khan & Dr. Dhananjay R Dolas, “Design, Modeling and Static Structural Analysis of Connecting rod.” Imperial Journal of Interdisciplinary Research (IJIR) Vol-3, Issue-1, 2016, pp 400-408.
  41. Akbar H Khan, Dr. Dhananjay R Dolas, Prof. M. M.Mirza, “Experimental stress analysis of two wheeler connecting rod using photoelasticity ,” International Journal of Advance Research and Innovative Ideas in Education, 2016, Vol-2 Issue-6 , pp 1141-1150.
  42. Omesh Raktate, Dhananjay Dolas, “Effect of Friction Stir Welding Process Parameters on Tensile Strength of AA 6082-T6,”International Journal of Advance Research and Innovative Ideas in Education, 2016, Vol-2 Issue-6, pp.1189-1195.
  43. Suraj R. Bhosle, Shubham R. Ugle & Dr. Dhananjay R. Dolas, “Comparative Analysis of Suspension System Coil Spring Using FEA,” Imperial Journal of Interdisciplinary Research (IJIR), Vol-3, Issue-1, 2017, pp757-761.
  44. Dr. Dhananjay R. Dolas, Varsha D Jadhav, “Implementation of information technology tools for Supply chain management,” KHOJ – Journal of Indian Management Research and Practices, ISSN : 0976-8262 (Special Issue),  International Conference Proceedings, pp 1-7. International Conference on Emerging Trends in Management & Technology 2016 (ICETMT-2016), 23rd & 24th December 2016, Organizing,  MAEER’S MIT School Of Management, Pune & Savitribai Phule Pune University, Pune.
  45. Akbar H Khan Dr. Dhananjay R Dolas, “ Static Structural and Experimental Stress Analysis of Connecting Rod Using FEA and Photoelasticity,” International Journal of Innovative Research in Science, Engineering and Technology, Volume 6, Special Issue 1, January 2017, International Conference on Recent Trends in Engineering and Science (ICRTES 2017), 20th-21st January 2017 Organized by, Research Development Cell, Government College of Engineering, Jalagon (M. S), India, pp 578-585
  46. Yogesh Muli, Dhananjay R. Dolas, “Structural and Thermal Analysis of Disc Brake Rotor,”   International Journal of Innovative Research in Science, Engineering and Technology, Volume 6, Special Issue 1, January 2017, International Conference on Recent Trends in Engineering and Science (ICRTES 2017), 20th-21st January 2017 Organized by, Research Development Cell, Government College of Engineering, Jalagon (M. S), India, pp 586-590.
  47. Ajinkya Pathrikar, Farazuddin Zafaruddin & Dr. Dhananjay R. Dolas, “ Investigation of Surface roughness for Titanium alloy Using by Wire Cut Electrical Discharge Machine,”  Imperial Journal of Interdisciplinary Research (IJIR) Vol-3, Issue-4, 2017, pp1825-1830.

Paper presented at National & International Conferences

Details of Publication
National:-

  1.  Swapneel R. Zende , Sarfraz Ali quadri & Dhananjay R. Dolas , “ Reverse Engineering Approach To 3D Modeling Using 2D Stylist Sketches And Existing Blueprints,” Proceedings of AICTE Sponsored National Conference On Emerging Trends in Mechanical Engineering for Sustainable Development,  Rajeev Gandhi Memorial College of Engineering & Technology (Autonomous) Nandyal-515501, Kurnool, 22 March 2014  pp 31-37
  2. V. Y. Gosavi, P. P. Khairnar, D. R. Dolas, Six-Sigma Approach to Reduce Bail Tight Defect in Brake Pedal,”  Proceedings of the 4th National Conference on Recent Advances in Manufacturing (RAM-2014) ISBN: 978-93-5156-755-4 Sardar Vallabhai National Institute, Surat.
  3. Sarfraz Ali Quadri & D. R. DolasStress Analysis of Involute Spur Gear of Lathe Machine under Static Loading”, 5th National Conference on Recent Advances in Manufacturing ISBN 978-93-5212-649-1, at  SV NIT Surat on 15-17 May 2015 pp 268-272.
  4. Farazuddin Zafaruddin & D. R. DolasCharacteristic of Brakes Pad Material : A Review paper  ”, 5th National Conference on Recent Advances in Manufacturing, ISBN 978-93-5212-649-1, at  SV NIT Surat on 15-17 May 2015, pp 503-507.
  5. Swapneel R. Zende and Dhananjay R. Dolas, “Methodology for structural optimization using CAD software,” Statistical Analysis and Computing in Engineering and Management  (August 07-08, 2014)   DY Patil College of Engineering, Akurdi, Pune,  pp 161 -165.
  6. Sarfraz Ali Quadri and Dhananjay R. Dolas, “ Pareto Analysis of Lead Acid Battery,” Statistical Analysis and Computing in Engineering and Management  (August 07-08, 2014)   DY Patil College of Engineering, Akurdi, Pune  pp 65 -69
  7. S. G. Badekar & D. R. Dolas, Brake Assisted Differential Locking System,” National Conference on Recent trends in IC Engine and Automobiles. March 3-4 2010 Amrutvahini College of Engineering, Sangamner. University of pune, Pune
  8. S. G. Badekar & D. R. Dolas,“Hydrogen Fuelled IC Engine, National Conference on Recent trends in IC Engine and Automobiles. March 3-4 2010,  Amrutvahini College of Engineering, Sangamner. University of pune, Pune.
  9. R. D. Gurav & D. R Dolas, “Intergrating PLM and ERP,” A National Conference on Recent Advances in Mechanical Engineering, College of Engineering, Osmanabad, Jan 28, 29 2011.
  10. Farazuddin Zafaruddin, Sarfraz Ali Quadri & D. R. Dolas “Methodology To Investigate Wear Rate Of Brake Pad Using Pin On Disc ”, National Symposium on Engineering and Technology (NSET-2016) March 11-12, 2016, Ramchandra college of Engineering , pune, Pune, Maharashtra.
  11. Akbar H. Khan & Dhananjay R. Dolas, “Comparative study of two wheeler connecting rod using photo elasticity and FEA”, A National conference on advances in materials and product design, ISBN- 978-93-5268-172-3, 10-11th march 2017, pp 304-309, S.V. National institute of technology Surat, India.
  12. Vaibhav D. Kshirsagar, Vaibhav.D.Tarapure, Dhananjay Dolas, “Performance and Emission Improvement of Automobile Engine by using Supercharging and Turbocharging: A Review,” 1st National Conference on Mechanical Engineering in Next Decade (NC-MEND 2017), 10 - 11 March, 2017  GCE, Karad , ISBN- 978-93-86369-14-7 pp 54-56.


International (In India):-

  1. D. R. Dolas, S. D. Deshmukh, “Reliability & Pareto Analysis of Water Pump,” Recent advances in statistics & their application (ICRSTAT2013), 28-30 December 2013, Dr. Babasaheb  Ambedkar  Marathawada University, Aurangabad.
  2.  D. R. Dolas, M.D Jaybhaye, S.D. Deshmukh, “An Analysis of Diesel Engine Systems Using Pareto Lorenz Method,” International Conference on Innovative in Design, Manufacturing & Concurrent Engineering (IDMC-2014) 1-3 March 2014 NIT Rourkela.
  3. D. R. Dolas, M.S. Kadam & S. D. Deshmukh, “Framework of Green supply chain management,” 3rd International conference on supply chain management, Best practices in supply chain management. (BPSCM – 2014), 28th to 30th Nov 2014. IIIE Udaipur Chapter, Udaipur.
  4. D. R. Dolas, S. D. Deshmukh, “ Repair and Maintenance Cost Model of Diesel Engine for Compressor Application ,” Proceedings of the 57th National Convention of Indian Institution of Industrial Engineering & 3rd International Conference on Industrial Engineering (ICIE 2015), ISBN: 978-93-84935-56-6,  at Sardar Vallabhbhai National Institute of Technology, Surat,  November 26 - 28, 2015,        Vol-II,  pp 1277- 1282,
  5. Sarfraz Ali Quadri, Swapneel R. Zende, Farazuddin, Dhananjay R. Dolas, “Implementation of FTA & FMEA for Automobile Battery.” Int. Conf. on Industrial, Mechanical and Production Engineering: Advancements and Current Trends Department of Mechanical Engineering, MANIT, Bhopal, November 27-29, 2014  ISBN: 978-93-84935-03-0.pp. 619-625
  6. Dattatray Vishnu Wagh, D. R. Dolas, N.D.Misal , “Optimization of Process Parameters for PCM of Inconel 600 Using Response Surface Methodology,” Proceedings of ISET2015 International Conference on Design, Manufacturing and Mechatronics February 11-13, 2015, Pune, Maharashtra, India.
  7.  Sarfraz Ali N. Quadri, Dhananjay R. Dolas , “ Automotive Supply Chain Management: The Indian Scenario,”  Proceedings of the 57th National Convention of Indian Institution of Industrial Engineering & 3rd International Conference on Industrial Engineering( ICIE 2015), at Sardar Vallabhbhai National Institute of Technology, Surat, ( November 26 – 282015),  ISBN: 978-93-84935-56-6,  Vol-I, pp 122-  125.
  8. Dr. Dhananjay  R  Dolas, Varsha  D Jadhav, “ System Reliability analysis using Computer Software’s,” 2015 GITS-MTMI International Conference on Innovations in Science, Technology, Management & Well Being at Geetanjali Institute of Technical Studies, Udaipur, Rajasthan, India. (27-28-29 December 2015).
  9. Dr Dhanajay R. Dolas, Farazuddin Zafaruddin, and Sarfraz Ali N. Quadri,“Offline Robot Programming Methodology in Machining Operation,” International conference on research and innovation in Engineering (ICRIE 2016), on 12- 13 Feb 2016 United group of institution Greater Noida . ISBN – 978-93-5254-986-3,  pp 136- 139.
  10. Ajinkya Pathrikar, Sarfraz Ali Quadri, Dhananjay R. Dolas, “ Optimization of process parameters in wire electrical discharge machining (WEDM) : A Review ,” International Conference on Latest Developments in Materials, Manufacturing and Quality Control(MMQC-2016), 12- 13 Feb 2016,  GianiZail Singh Campus College of Engineering & Technology (A Constituent Campus of Maharaja Ranjit Singh State Technical University) Bathinda, Punjab India. ISBN No: 978-93-5212-858-7, PP 14- 20.
  11. Dr. Dhananjay  R  Dolas, Varsha  D Jadhav, “Reliability Modelling of Generator using Weibull distribution, :” International Conference on Recent Advances in Statistics, (ICS-2016), 27-29 jun 2016, Organized by Department of Statistics University of Mumbai, Vidyanagari, Santacruz (E) Mumbai -400 098
  12. Akbar H Khan, Dhananjay R Dolas, “Modelling and analysis of two wheeler connecting rod: a review,” International Conference on Modern Era Research in Mechanical Engineering (MERME-16) 29th -30th September 2016 Organized by Mechanical Engineering Department Rajarambapu Institute of Technology (RIT) Rajaramnagar In Association with Institute of Engineers, India (IEI) Kolkata, Proceedings of the Modern Era Research in Mechanical Engineering-2016 (MERME-16), pp 200-206
  13. Sarfraz Ali N. Quadri, Ahmed Ali Quadri and Dr. Dhananjay R. Dolas, “ Development of of interactive graphical user interface for stress analysis of spur gear,” International Conference on Advanced and Agile Manufacturing and Agile software development(ICAM-ASD2016) Shri Guru Gobind institute of Engineering and Technology, Nanded, 6& 7th Oct 2016 , ISBN : 978-93-86256-04-1, pp 155-157.
  14. Farazuddin Zafaruddin & D. R. Dolas, “Tribological Investigation on Automotive disc brakes: A Review,” International Conference on Advanced and Agile Manufacturing and Agile software development(ICAM-ASD2016) Shri Guru Gobind institute of Engineering and Technology, Nanded, 6& 7th Oct 2016 , ISBN : 978-93-86256-04-1, pp 158-161.
  15. Dhananjay. R. Dolas, Nitin. G. Phafat, Sudhir. D. Deshmukh, “ Reduction of Manufacturing defects on Brake liner using Six-Sigma Methodology,” 58th  National Convention of Indian Institution of Industrial Engineering &  International Conference on Smart strategies for digital world - Industrial Engineering perspective: 21-22 Oct 2016 at Shri  Ramdeobaba college of Engineering & Management, Nagpur.
  16.  Dhananjay. R. Dolas, Dilip. S. Khedekar, Vinita S Joshi and Munjadas. S. Kadam, “Scope of Online Shopping In India,” 58th  National Convention of Indian Institution of Industrial Engineering &  International Conference on Smart strategies for digital world - Industrial Engineering perspective: 21-22 Oct 2016 at Shri  Ramdeobaba college of Engineering & Management, Nagpur
  17. Omesh Raktate, Dhananjay Dolas, Gadakh Vijay, “Experimental Investigation of FSW process parameters by using RSM on 6082-T6 Aluminium Alloy,” Proceedings of First Int. Con. on Materials, Manufacturing and Design Engineering (iCMMD 2016), Organized by Department of Mechanical Engineering, Dr. Babasaheb Ambedkar Technological University, Lonere, M.S. India. 402103, pp 244-249
  18. Saurabh Joshi, Sarfaraz Ali Quadri, Dhananjay R. Dolas, “ Comparative Study of Pistons of Aluminium & Cast Iron, Coated & Uncoated using FEA,” Proceedings of First Int. Con. on Materials, Manufacturing and Design Engineering (iCMMD 2016), Organized by Department of Mechanical Engineering, Dr. Babasaheb Ambedkar Technological University, Lonere, M.S. India. 402103,  pp 263-266.
  19. Dhananjay R Dolas, Varsha D Jadhav, Sudhir D Deshmukh , “ Scope of E-Commerce in India, “International Conference on Manufacturing Excellence (ICMAX – 2017), 3– 4 March, 2017. (ISBN NO : 978-93-24457-41-5) organised by Production engineering department K.K. wagh institute of Engineering Eduction & Research, Nashik &  Savitribai Phule Pune university, Pune , pp 120-125.
  20. Saurabh A. Joshi, Yogesh Muli, Dhananjay R. Dolas , “ Thermo- Mechanical Comparative Analysis of I. C. Engine Piston with Conventional & Modified Geometry using FEA,” International Conference on Manufacturing Excellence (ICMAX – 2017), 3– 4 March, 2017, (ISBN NO : 978-93-24457-41-5) organised by Production engineering department K.K. wagh institute of Engineering Eduction & Research, Nashik  &  Savitribai Phule Pune university, Pune , pp 247- 251.
  21. Sanket Bodkhe, Dhananjay R Dolas , “ Experimental Investigation of Process Parameters in Shielded Metal Arc Welding of Pipes: A Review,”  International Conference on Manufacturing Excellence (ICMAX – 2017), 3– 4 March, 2017, (ISBN NO : 978-93-24457-41-5) organised by Production engineering department K.K. wagh institute of Engineering Eduction & Research, Nashik . &  Savitribai Phule Pune university, Pune , pp 94-100

International (Abroad):-
1.
2.

 

Dr Nitin Phafat


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-Nil
…International:-

  1. Phafat N.G, Deshmukh R.R., Dr. S. D. Deshmukh , D.R.Dolas “ Enhancement of Overall Equipment Effectiveness at NRB Bearings” International Journal
  2. Phafat N.G, Deshmukh R.R., Dr. S. D. Deshmukh, ‘Study of cutting parameters effects in MQL-employed hard-milling process for AISI H13 for tool life’  Applied Mechanics and Materials Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMM.393.240, Vol. 393 2013, 240-245
  3. Phafat N.G, Deshmukh R.R., Dr. S. D. Deshmukh, ‘Effect of coolant pressure, angle of impingement and spot distance in Minimum Quantity Lubrication for turning of hardened AISI H13’, Journal of the Institution of Engineers (India): Series C.(Paper accepted)
  4. Mr. Shukla B.A., Prof. Phafat N.G., ‘Analysis of co2 welding parameters on the depth ofpenetration of aisi 1022 steel plates using responsesurface methodology’ International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 –6340(Print), ISSN 0976 – 6359(Online) Volume 4, Issue 6, November – December 2013 pp31-36
  5. Mr. Shukla B.A., Prof. Phafat N.G., ‘Experimental study of co2 arc welding parameters on weld strength for aisi 1022 steel plates using response surface methodology’ International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 –6340(Print), ISSN 0976 – 6359(Online) Volume 4, Issue 6, November – December 2013 pp37-42
  6. Mr. Dhanke V.D., Prof. Phafat N.G., ‘Optimization of process parameters in drilling of aisi 1015 steel for exit burr using RSM and Taguchi’ international journal of mechanical engineering and technology (IJMET), ISSN 0976 –6340(print), ISSN 0976 – 6359(online) volume 4, issue 4, July-August 2013 pp327-337
  7. Mr. Dhanke V.D. Prof. Phafat N.G., ‘Experimental study of drilling parameters on weld strength for AISI 1015 steel plates using response surface methodology’ International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 –6340(Print), ISSN 0976 – 6359(Online) Volume 4, Issue 6, November – December 2013 pp37-42
  8. Rahul B. Lahoti Nitin G. Phafat, “OPTIMISATION OF BLANKING PARAMETERS FOR AISI 1018 AND AISI 202 STEEL SHEETS USING ANFIS”, International Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN: 2349-2163 Volume 1 Issue 7 (August 2014)
  9. Rahul B. Lahoti Nitin G. Phafat, “Optimization of Blanking Parameters for AISI 1018, A 653, AISI 304 Using Genetic Algorithm” , INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH & DEVELOPMENT August, 2014 Vol 3 Issue 8
  10. Vaibhav Gosavi, Dr. Nitin Phafat and Dr. Munjadas Kadam, “Experimental investigation of machining parameter for micro hole drilling on titanium wrought alloy”, IJISET - International Journal of Innovative Science, Engineering & Technology, Vol. 2 Issue 5, May 2015.
  11. Vaibhav Gosavi, Dr. Nitin Phafat and Dr.Sudhir Deshmukh, “ Investigation of effect of process parameters in micro hole drilling”, International Journal of Modern Trends in Engineering, Volume 0X, Issue 0Y, [Month – 2015] ISSN (Online):2349–9745 ; ISSN (Print):2393-8161

Paper presented at National & International Conferences

Details of Publication
National:-

  1. “Excellence through Implementation of Total Quality Management” National Conference on Sun Rising Technologies at Parshwanath Engineering College, Thane.
  2. “A Case Study on Six Sigma Process Technology Review” National Conference on Sun Rising Technologies at Parshwanath Engineering College, Thane.
  3.  “Cutting speed Maximization of High Chromium High Carbon Die                           Steel using    Genetic Algorithm” National Conference on Sun Rising                           Technologies at Parshwanath Engineering College, Thane.
  4. “A Systematic Approach To Concurrent Product Design”, National Conference on Sun Rising Technologies at Parshwanath Engineering College, Thane.
  5. Phafat N.G, Deshmukh R.R., Dr. S. D. Deshmukh, ‘Optimization Of Minimum Quantity Lubrication Parameters For End Milling And Turning Operation By Genetic Algorithm’, National Conference on Recent Advances in Manufacturing 27-29 June, 2012 S.V. National Institute of Technology, Surat, pp 150-155.

International (In India):-

  1. Phafat N.G, Deshmukh P.A., Dr. S. D. Deshmukh, Excellence Through Implementation Of Strategic Supply Chain Management”  International Conference on Productivity & Quality Research at IIT Delhi  (ICPQR05).
  2. Phafat N.G, Deshmukh P.A., “Six Sigma: Its implementation in Wipro’s facility management and maintenance   functions”, International Conference on Advance in Manufacturing & Technology Management (ICAMTM 2007) at Parshwanath Engineering College, Thane.
  3.     Phafat N.G, Deshmukh R.R., Dr. S. D. Deshmukh, “Optimization of parameters in high speed end milling of hardened AISI H13 using Minimum Quantity Lubrication for sustainable improvement”, 4th International and 25th All India Manufacturing Technology, Design and Research Conference [AIMTDR 2012], December 14-16, 2012
  4.   Phafat N.G, Deshmukh R.R., Dr. S. D. Deshmukh, ‘Optimization of Surface Roughness in End Milling on AISI H13 Using Particle Swarm Optimization’ COPEN 8 :2013,  International Conference on PRECISION, MESO, MICRO & NANO ENGINEERING,NIT Calicut, December 13-15 2013.
  5.  Deshmukh R.R., Phafat N.G, , Dr. S. D. Deshmukh, ‘Optimization of surface roughness in dry turning of Hardened steel’ COPEN 8 :2013,  International Conference on PRECISION, MESO, MICRO & NANO ENGINEERING,NIT  Calicut, December 13-15 2013.
  6. V.Y.Gosavi, Phafat N.G, Dr. S. D. Deshmukh, ‘Process efficiency improvement of  yoke component using TOPSIS and DOE technique’ International Conference of Institution of Industrial Engineering December 2015, at SVNIT Surat.


International (Abroad):-
1. Phafat N.G, Deshmukh R.R., Dr. S. D. Deshmukh, ‘Study of cutting parameters effects in MQL-employed hard-milling process for AISI H13 for tool life’ 2013 International Conference on Advances in Mechanical Engineering (ICAME 2013) 28-29 August 2013 Melaka, Malaysia.

 

Mr Dilip Khedekar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-   ---
1.
2.

International:-
1.“Multiobjective Optimization of Crankshaft Pin Grinding”. Published in  International Journal Of  Science and Research.2016

2.“A REVIEW STUDY OF MQL AND DRY TURNING OF AISI 304”,Published in International Journal of Engineering Applied Sciences and Technology.—2016

 3.“A Review on Turning of Metal Matrix Composites”,Published in International Journal of Innovative Research in Science, Engineering and Technology.—2016
4.“Optimization of Turning Process during Machining of Al-SiCp Using Genetic Algorithm”, International Journal of Modern Trends in Engineering and Research.—2016.

5.“Surface Roughness Optimization Of HCHCR Steel With Pvd Coated End Milling Cutters Under The Influence Of MOS2 By RSM Analysis.”Published in International J. of Multidispl.Research & Advcs. in Engg.---2016

 

6.“Corrosion of Steel : A Review”,Publish in International Journal of Science & Engineering Development  Research –2016

7.“Optimization of Process parameters in EDM for Machining of Inconel 718 using Response Surface Methodology”, Published in International Journal of Innovations in Engineering and Technology.—2016.

 

 8.“Optimization of Process Parameters in Electric Discharge Machining Of Inconel 718 by Using Copper Electrode”, Published in IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) –2016.

 

 9.“Optimization For Dry Turning Of Aisi 304 Austenitic Stainless Steel With Pvd Coated Cemented Carbide Tool”,Published in International Journal of Engineering Applied Sciences and Technology – 2016

 

Paper presented at National & International Conferences

Details of Publication
National:- --
1.
2.

International (In India):-

  1. Optimization of Process parameters of Nickel – Chromium Electroplating for Thickness Variation Using Genetic Algorithm”, Published in  Springer -Atlantis Press –2016. Presented Research Paper in ICMMD – 2016 Dr.BATU-Loner.
  1.  “Mechanical Characterization of Hardness and Surface Roughness for Cryo Treated 7075   Aluminium Alloy”, Published in  Springer -Atlantis Press  --2016 Presented Research Paper in ICMMD – 2016 Dr.BATU-Loner.

 

  1. Some Investigations into the Electrical Discharge Machining of Inconel 718 

Alloy using Copper and Brass Electrodes.” Published in  Springer -Atlantis Press  --2016. Presented Research Paper in ICMMD – 2016 Dr.BATU-Loner.

  1. “Development of the cryogenic processing cycle for age hardenable AA7075  

aluminium alloy and optimization of the process for surface quality using gray relational analysis.”Published in Elsevier – Material Today Proceeding .2017 Presented Research Paper in ICMPC -2016 GRIET – Hyderabad

      5.  “Scope of Online Shopping In India,” 58th  National Convention of Indian   
             Institution of Industrial Engineering &  International Conference on Smart
             strategies for digital world - Industrial Engineering perspective: 21-22 Oct 2016 at  
             Shri  Ramdeobaba college of Engineering & Management, Nagpur

 


International (Abroad):-  ---
1.
2.

 

 

Mr Rajesh Kathar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1  Rajesh A Kathar, Jiwak G Suryawanshi (2016), Homogeneous Charge Compression Ignition  Engine- An Experimental Study, AJANTA, ISSN  2277-5730, VOL V, ISSUE-IV, Page-22-32. Published- OCT-DEC-2016.
International:-
1. Rajesh A Kathar, Jiwak G Suryawanshi (2016), Experimental investigation on Homogeneous Charge Compression Ignition Combustion Engine Fueled with Gasoline and DEE blend, International Journal of Advance Research in Science and Engineering, ISSN (0) 2319- 8354, ISSN (P)-2319- -8346, VOL 05, ISSUE-9.

Paper presented at National & International Conferences

Details of Publication
National:-
International (In India):-
1. . Rajesh A Kathar, Jiwak G Suryawanshi (2016), Experimental investigation on Homogeneous Charge Compression Ignition Combustion Engine Fueled with Gasoline and DEE blend, International Journal of Advance Research in Science and Engineering, ISSN (0) 2319- 8354, ISSN (P)-2319- -8346, VOL 05, ISSUE-9.
International (Abroad):-

 

Ms Priya Shinde


Publications in Peer Reviewed National & International Journals

Details of Publication
International: -
1.” Modeling & Analysis of advance mechanical materials”- International conference of IEEE on Advance Mechanical engineering.
2.” Effect of grinding parameters on carbide materials”- International conference of IEEE on Mechanical & Aerospace Engineering CMAE.

Paper presented at National & International Conferences

Details of Publication
National: -
1. Working of Wankel Engine and Plate Technology”- National Conference on State of Art of Technologies in Mechanical Engineering.

2. “The Application Neural Networks in the Modeling of Plate Rolling Process” National Conference on State of Art of Technologies in Mechanical Engineering

 

International (In India): -
1.” Emerging Technologies & applications in Mechanical Engineering and Science”- International General of IJ-ETA-ETS, ISSN-0974-3588,
2. “Conservation of Energy and Environment for the Millennium” – An International Technical Symposium for Engineering, Techno-millennium.

Research CHEMICAL

Dr. O.K. Mahadwad


Publications in Peer Reviewed National & International Journals

Details of Publication
  
National:-

  • O.K. Mahadwad, P.A. Parikh, R.V. Jasra, R.J. Tayade, “Photocatalytic degradation of textile dyes”, J. Environ. Sci. and Engg. 52 No. 3, (2010), 181-184. ISSN: 0367-827X.  

International:-

  • O. K. Mahadwad, D. D. Wagh, P. L. Kokil, “Formation, analysis, and Characterization of wood pyrolyzed oil”, Int. Journal of Emerging trends in Chemical Engineering (STM), 3 No. 02, (2016), 36-41. ISSN: 2349-4786.
  • P.M. Pathak, O. K. Mahadwad, “Enhancement in Electricity generation & waste water treatment by increasing  surface area of electrodes (four blade, six blade & eight blade electrodes) in dual chamber mediator less microbial fuel cell”, Journal of Innovative and Emerging Research in Engineering. 2 No. 4, (2015), 117-124. e-ISSN: 2394 – 3343.
  • Akash B. Boharapi, Ganesh R. Kale, Omprakash K. Mahadwad, “Co-gasification of coal and biomass – thermodynamic and experimental study”, International Journal of Research in Engineering and Technology, 4 No.6, (2015), 346-352. eISSN: 2319-1163.
  • Mehul Soni, Anand Laddha, Harshitkumar Chudiwal, Omprakash Mahadwad, “Comparison of a Fluidized Bed Dryer with Conventional Dryers Used in Food Processing Industries”, International Journal of Engineering Technology Science and Research, 2 No. 5, (2015), 36-43. ISSN 2394 – 3386
  • O.K. Mahadwad, P.A. Parikh, R.V. Jasra, C. Patil, “Photocatalytic degradation of reactive black-5 dye using TiO2 impregnated Activated carbon”, J. Environ. Technol. 33 No.3, (2012), 307-312. ISSN: 1479-487X.
  • O.K. Mahadwad, P.A. Parikh, R.V. Jasra, C. Patil, “Immobilized photocatalytic degradation of textile dyes with polyvinyl acetate as a binder”, J. Indus. Engg. Technol. 4 No. 1, (2012), 47-59. ISSN: 0974-3146.
  • O.K. Mahadwad, P.A. Parikh, R.V. Jasra, C. Patil, “Photocatalytic degradation of reactive black-5 dye using TiO2 impregnated ZSM-5”, Bull. Mater. Sci. 34 No.3, (2011), 551-556. ISSN: 0250-4707.
  • O.K. Mahadwad, P.A. Parikh, R.V. Jasra, J. bhalodiya, “Decolorization of textile dyes by immobilized photocatalytic degradation process”, J. Indus. Engg. Technol. 2 No. 1, (2010), 207-214. ISSN: 0974-3146.

Paper presented at National & International Conferences

Details of Publication

 International (In India):-

  • Omprakash Mahadwad, Hima Padhiar “Photocatalytic degradation of the textile effluents” is presented in CHEMCON-2013 held at Institute of Chemical Technology, Mumbai.
  • O.K. Mahadwad, P.A. Parikh, R.V. Jasra “Photocatalytic degradation of the textile dyes” is presented in CHEMCON-2008 held at Panjab University, Chandigarh.
  • Presented and published the paper on “Optimal Design of Ammonia Synthesis Reactor”, in CHEMCON-2006 held at GNFC Ankleshwar. 
  • Presented and published the paper on “Optimal Process Simulation by GAMS”, in CHEMCON-2006 held at GNFC Ankleshwar.
  • Presented and published the paper on “MATLAB Solution for the process control”, in CHEMCON-2004 held at Bombay.
  • Presented and published the paper on “Effect of particle size on dynamic behavior of fluidized bed reactor for the ethylene polymerization”, in CHEMCON-2003 held at Bhubaneshwar (Orica). 

 

 International (Abroad):-

  • O. K. Mahadwad, D. D. Wagh, P. L. Kokil, “Formation, analysis, and Characterization of wood pyrolyzed oil”, Proceedings of the 29th Symposium of Malaysian Chemical Engineers (SOMChE) 2016, Miri, Sarawak, Malaysia, December 1 – 3, 2016.

 

 

Dr. S. Y. Guhe


Publications in Peer Reviewed National & International Journals

Details of Publication

National:-

International:-

  • Karda, R., Guhe,S.Y. & Das, D. (2017) , Mathematical modeling of atmospheric dispersion of radionuclides from stack release, Paper submitted to Progress in Nuclear Energy
  • Guhe, S. Y. Monga, R. S. K. & Kale, G. (2016) Evaluation of performance of oxygen carrier metal oxides in chemical looping combustion of coal with available resource, VISTA International Journal on Energy, Environment & Engineering, 1, (1-6), pp 47-52.
  • Mundhe,S.B, Pople, M.U. & Guhe, S.Y. (2013) Models to predict the performance of solvent and solute transport process through membrane in reverse osmosis, Int J. Biotech. Chem. & Env. Eng., 2, 1, pp 50-55.
  • Doke, S.D., Kale, G.R. and Guhe,S.Y. (2015) Thermodynamic modelling and experimental study of rice husk pyrolysis, Int. J. Res. Eng Tech. (IJRET), 4, 6, pp 311-317.
  • Monga, R. S., Kale, G.R. and Guhe,S.Y. (2015) Chemical looping combustion of rice husk, Int. J. Eng Res Appli. (IJERA), 5, 5, pp 132-138.
  • Guhe, S.Y. (2007), Agile Batch Distillation via State Estimation, PhD Thesis, School of Chemical and Environmental Engineering, University of Nottingham, UK.

 

Paper presented at National & International Conferences

Details of Publication

National:-

  • Doke, S.D., Kale, G.R. and Guhe,S.Y. (2015) Thermodynamic modelling of rice husk pyrolysis, In proceedings National Conference on Advanced Technology NIRMITI 2015, Priyadarshani Institute of Engineering and Technology, February 28, Nagpur, India.

 

International (In India):-

  • Karda, R., Guhe,S.Y. & Das, D., (2016) Estimation of airborne concentration of radionuclides using fundamental approach, In proceedings the Indo-Canadian Symposium & CHEMCON 2016 Conference: 69th Annual Session of Indian Institute of Chemical Engineers, December 27-30, Chennai, India. (Received Best Paper Award in Environmental Engineering category)
  • Guhe,S.Y., Kharmate, S., Aparanji,P., & Shindepatil,K. (2014) Anti-bacterial activity of copper nanoparticles, In proceedings the Indo-Japnese Symposium & CHEMCON 2014 Conference: 67th Annual Session of Indian Institute of Chemical Engineers, December 27-30, Chandigarh, India.
  • Guhe,S.Y., Santre, D.M., Kanade, V.R., & Palandurkar,S.M. (2014) Bio-ethanol from algae, In proceedings the Indo-Japnese Symposium & CHEMCON 2014 Conference: 67th Annual Session of Indian Institute of Chemical Engineers, December 27-30, Chandigarh, India.
  • Guhe,S.Y., Johari, A., Pathak, M & Khan, S. (2013) Synthesis of copper nanoparticles based on green chemistry principles, In proceedings the Indo-North American Symposium & CHEMCON 2013 Conference: 66th Annual Session of Indian Institute of Chemical Engineers, December 27-30, Mumbai, India.

 

International (Abroad):-

  • Guhe, S.Y.,  Monga,  R.  K., Rathore, L.  and  Kale, G.R.  (2015)  Chemical Looping Combustion of Coal with Available Resources, in Proceedings of the International Conference on Coal Science & Technology (ICCS&T) 2015, Incorporating Australia-China Symposium on Energy, September 27 – October 1, Melbourne, Australia.
  • Guhe, S.Y., Kharmate S., Aparanji, P. and Shindepatil, K.  (2015)  Synthesis of copper nanoparticles using microwave irradiation technique,  in Proceedings of The 16th Asian Pacific Confederation of Chemical Engineering (APCChE) 2015, September 27 – October 1, Melbourne, Australia.
  • Mundhe,S.B, Pople, M.U. & Guhe, S.Y. (2013) Modelling and simulation of hard water desalination using reverse osmosis. Paper accepted for the 7th International Water Association (IWA) specialised Membrane Technology conference, August 26-29, Toronto, Canada. (Not Presented)
  • Wilson, J.A. & Guhe, S.Y. (2008) Agile batch distillation control using batch-to-batch learning, in ‘Proceedings of the 15th Regional Symposium on Chemical Engineering and 22nd Symposium of Malaysian Chemical Engineering (RSCE-SOMCHE08)’, December 2-3, Kuala Lumpur, Malaysia.
  • Guhe, S.Y. & Wilson, J.A. (2007) Efficient model identification through sensor location in batch distillation, in ‘Proceedings of the 8th International IFAC Symposium on Dynamics and Control of Process Systems (DYCOPS-2007)’, June 4-8, B. Foss & J. Alvarez, eds., Cancun, Mexico, pp 111-116.

(IFAC Proceedings Volumes, Vol.40, Iss. 5, 2007, Pages 111-116, Elsevier Publishers, ISSN 1474-6670),
http://dx.doi.org/10.3182/20070606-3-MX-2915.00066

(http://www.sciencedirect.com/science/article/pii/S1474667015317092)
  • Wilson, J.A. & Guhe, S.Y. (2005) Observability matrix condition number in design of measurement strategies, in ‘Proceedings of the European Symposium on Computer Aided Process Engineering (ESCAPE-15)’, L. Puigjaner & A. Espuna, eds., Elseveir, Barcelona, Spain, pp 397-402.

(Book Series: Computer Aided Chemical Engineering, vol. 20, pp. 397–402, 2005, ISSN: 1570-7946, ISBN: 978-0-444-51987-0)
http://dx.doi.org/10.1016/S1570-7946(05)80188-9

(http://www.sciencedirect.com/science/article/pii/S1570794605801889) 

 

Ms M. R. Gaonkar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Aastha P. Chakraborty, Madhavi gaonkar “Application & characterization of egg shell STM journal Vol 4 2016 Issue 3 pg 25 to 35

International:-
1.  Aastha P. Chakraborty, Madhavi gaonkar “Eggshell as calcium supplement tablet”International Journal of Animal Biotechnology and application Vol 2 2016 Issue 1 pg 1 to 7 www.journalspub.com
2. A. P. Chakraborty, Madhavi gaonkar “Application of Eggshell as fertilizer and calcium supplement tablet” International Journal of Innovative research in science engg & technology Vol 5  Issue3 March 2016 3520 TO 3525  ISSN(Online): 2319-8753, ISSN (print)2347-6710
3. . Tejeswi ramprasad, Shashank tiwari, Diptendu das, Madhavi gaonkar “Assessment of toxic gas dispersion using Phast &Panache “ (IJRET) International journal of research in engg & technology Vol:3 Issue 1 pg 1 to 5 ISSN:2319-1163  avaliable on http://www.ijret.org.
4. Mohammed Fasiuddin, Mahesh Gaike, Bhushan Jiotode Madhavi gaonkar “Green Synthesis of Silver Nanoparticles and investigation of antibacterial property”. IJETSR International Journal Of Engineering Technology Science and Reasearch Vol 2,Issue 6,June 2015. ISSN 2394-3386
5. Ms.Madhavi Gaonkar Naik Ms.Mohini Dilip Duraphee ” Review Papers on parameters affecting Bioremediation. International journal of Life Science And Pharma Reasearch Volume 2, Issue 3 2012 (July –Sept) pg L-77 to L-80. ISSN 2250-0480

 

Paper presented at National & International Conferences

Details of Publication
National:-
1. Ms.Madhavi Gaonkar on “ Review on application of nanotechnology in pollution control”National conference on Environment and energy aspects for sustainable development (NCEEASD) at SGGSIET Nanded on 15-16th mar 2013.
2. Ms.Jaishree G.Gawai ,Ms.Madhavi Gaonkar” Green Chemistry –challenges in todays scenario “Poster presentation at the National Conference at Current Trends in Chemical Reasearch(NCCTCR) at Vasantrao Naik Mahavidyala Abad todays scenario on 30th -31st Aug 2012.
International (In India):-
1.  Tejeswi ramprasad, shashank tiwari, diptendu das, madhavi gaonkar naik “ Comparision of dispersion models for H2S release from storage tanks “International Conference on Environment and Energy 2014 at Jawaharlal Nehru Technological University Hyderabad ICEE -2014 pg 142 ISBN :978-93-81212-96-7
2. Ms.Madhavi Gaonkar Naik Ms.Mohini Dilip Duraphee  ” Parameters affecting waste water treatment by ultrafilteration” International journal Current trends and challenges in Management, Engg, computer application and Technology Vol I Issue 6(VIII) Mar 2012 ISSN:2249-7455 pg65-69. ISSN:2249-7455 pg65-69.
3. 4. Ms.Madhavi Gaonkar Naik Prof Mangalay Kar “ Optimisation of parameters for fermentation process” at International Institute Of Information Technology pune ABCS-2010 13TH -14TH Nov2010 pg no 16


International (Abroad):-
1.
2.

 

Mr. V. A. Gite


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1.
2.

International:-
1.optimization of biodiesel production in spinning disc reactor using RSM in international journal of advanced research, ISSN NO 2320-5407.
2.extraction and characterization study of Aniseed oil,IJRSI,ISSN 2321-2705.

Paper presented at National & International Conferences

Details of Publication
National:-
1.Ionic Liquids For CO2 Capturing-Present status and future developments.national conference on green chemistry and engineering VNIT Nagpur 
2.Biodiesel production in a Novel Reactor.national conference on envirnonmental and energy aspects for sustainable development at SGGS IE&T Nanded.
3.Polymer Nanocomposites.NCRAP 2010 at MIT Aurangabad
International (In India):-
1.desulfurization of diesel fuel by extraction with 1-butyl 3-methyl imidozelium tetrafluromate ionic liquid. INDIAN CHEMICAL ENGINEERING CONGRASS   69 Annual session of indian institute of chemical engineers      CHEMCON 2016                                         
2.Spinning Disc Reactor For Biodiesel Production.international conference on advances in chemical engineering at NIT Raipur Chhattisgarh.

International (Abroad):-
1.
2.

Research APPLIED SCIENCE

Dr V. M. Arole


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-Nil
International:- 10

  • Systematic study of the process parameters affecting hydrogen plasma                       

passivation of polycrystalline silicon and polycrystalline silicon solar cells.
      Solar Energy  Materials , vol.17, p.391-405 (1988)
2.   CW   CO2    laser annealing of boron doped polycrystalline silicon.
J.Phys: D: Appl. Phy.   Vol.21 p.1761-1763 (1988)

  • Hydrogen induced structural changes in polycrystalline silicon as revealed by positron lifetime spectroscopy. Physica Status Solidi (a)  vol. 111. p. 457 (1989)
  • Effect of hydrogen passivation on electrical transport in polycrystalline silicon .

Solar Energy Materials. Vol. 24 (1989)

  • Effect of  hydrogen  amorphous  silicon overlayer on electrical transport properties of polycrystalline silicon.  Presented at the National Solar Energy Convention at IIT , New Delhi in Dec.1987. Published in’ Energy Options for 9()’s ‘, edited by  N. K.  Bansal , V. V. N.             Kishore,  Anil Mishra . (Tata Mc-Graw-Hill publ .Co. Ltd. New Delhi (1988) p. 464
  • Stability analysis of thermistor based temperature control system.

Presented at DAE-BRNS  symposium on Electro-ceramics at Rajkot  in 1996. Published in Asian Journal of Physics ,vol .6. (No. 1& 2) p. 96 (Jan-March 1997)

  • Nanotechnology and Environmental pollution.

      International Journal of Advances in Management, Technology and Engineering Sciences
Vol. 1, Issue 6(X), pg.58-63, March 2012. ISSN:2249-7455.

  •  E-Waste Management.

      International Journal of Advances in Management, Technology and Engineering
Sciences, Vol. 1, Issue 6(X), pg.58-63, April 2012. ISSN:2249-7455.

  •  Global warming- causes and its impact.

International Research Journal of Humanities and Environmental Issues(IRJHEI)
Vol. 1, Issue 2, pg. 86-90, May 2012. ISSN:2277-9329.

  • Desalination and filtration of polluted water using Nanotechnology.

International Journal of Advances in Management, Technology and Engineering Sciences
Vol. 1, Issue 12(III), pg.168-171, Sept. 2012. ISSN:2249-7455.

 

Paper presented at National & International Conferences

Details of Publication
National:-15

  •  Improved grain boundary conduction in hydrogen passivated polycrystalline silicon

      Presented at the National Solar Energy Convention at Hyderabad in Dec. 1988

  • Leadership and management styles in technical education

Presented at 25th    ISTE Annual Convention At VRCE, Nagpur in Dec. 1995

  • Control of quality and standards for technical education.

       Presented at 26th  ISTE AnnualConvention, at MR Engineering College, Jaipur in
       Dec.1996

  • Role of technical institutions in the 21st  century.

Presented at the 1st  ISTE  convention (Maharashtra-Goa section)  at Walchand College of Engineering, Sangli, in Nov. 1996.

  • Internet- A novel means for global interconnectivity in the 21st  century.

Presented at ISTE Annual Convention MACT ,Bhopal in Dec.1997
      6 .  Role of technical institutions in the 21st  century
Presented at 2nd state level ISTE convention (Maharashtra –Goa section) at JNEC, Aurangabad in Jan 1998.
       7    Quality management of technical education in India.
Presented at 3rd state level ISTE convention (Maharashtra- Goa section) at CusrowWadia Institute of Technology, Pune, in Dec 1999.

  • Effect of hydrogen passivation on electrical transport in polycrystalline silicon

Presented at National Conference of Current trends in Materials Research for Advanced Technology (NCMRAT-2007) at Dept of Physics, Dr, BabasahebAmbedkarMarathwada University, Aurangabad. Jan 2007.
       9   Industry-Institute Interaction- A New Approach
Presented at 14th ISTE Convention (Maharashtra-Goa Section) at MGM’s JNEC,Aurangabad.Feb.2011.
       10  Nanotechnology and Air pollution
             Presented at Green Engineering and Environmental Pollution – A National Level 
             Conference  at MGM’s JNEC,Aurangabad.Feb.2012.
      11 Nanotechnology and Environmental pollution. Presented at National Workshop on Nanotechnology and Intellectual Property Rights and Patents in Science and Technology from Nanotechnology Perspectives at Dept of Nanotechnology Dr.Babasaheb Ambedkar Marathwada University, Aurangabad.
12  Technical Education in India:Issues and Challenges. Preasented in National conference on Make in India- The Road Ahead, at MGM Aurangabad, 30-31st Oct.2015 ISBN No.:978-81-928696-0-5
13 Various synthesis methods of Nanoparticles- a review. Preasented in National conference on Recent trends in science and engineering (NCRTSE-2014) at Dr. D. Y. Patil scool of Engineering and Technology, 12th &13th December, 2014
14 Fabrication of Nanomaterials by top-down & Bottom up approaches- An Overview. Preasented in National conference on Material Science and Technology (NCMST-2014), at Milliya Arts Science and Management Science College,Beed 23-24 Dec.2014
15 Role of teachers in communal harmony. Preasented in National conference on Role of Teachers in Promoting National Integration, Peace and Sustainable, Communal Harmony, at J.P.Naik cetre for education and development,Kothrud Pune.9 Feb.2014  ISBN:978-81-923835-5-2

International (In India):-Nil
International (Abroad):-Nil

 

 

Dr S. D. Dindulkar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-

  • 0

International:- Total 20 research paper published in well reputed international journals.

1.    Facile synthesis of N-benzylated 3-alkyl-2,6-diarylpiperidin-4-ones: Stereochemical investigation by 1D/2D NMR and single-crystal XRD;Someshwar D. Dindulkar, Paramasivam Parthiban, Vedavati G. Puranik, Yeon Tae Jeong. Journal of Molecular Structure 990 (2011) 44–56.
2.  BF3∙SiO2 is a simple and efficient Lewis acid catalyst for the one-pot synthesis of polyfunctionalized piperidin-4-ones; Someshwar D. Dindulkar, Paramasivam Parthiban,, Yeon Tae Jeong. Monatsh Chem 143 (2012) 113–118.
3.    Cd(ClO4)2·xH2O as a novel catalyst for the synthesis of a-aminophosphonates under solvent-    free conditions; Someshwar D. Dindulkar, Mudumala Veeranarayana Reddy, Yeon Tae Jeong. Catalysis Communications 17 (2012) 114–117.
4.    Synthesis and stereochemistry of highly crowded N-benzylpiperidones; Someshwar D. Dindulkar, Paramasivam Parthiban, Vedavati G. Puranik, Yeon Tae Jeong, Journal of Molecular Structure 1007 (2012) 158–167.
5.    Supported copper triflate as an efficient catalytic system for the synthesis of highly functionalized 2-naphthol Mannich bases under solvent free condition; Someshwar D. Dindulkar, Vedavati G. Puranik, Yeon Tae Jeong,  Tetrahedron Letters 53 (2012) 4376–4380.
6.    BF3∙SiO2-catalyzed one-pot synthesis of a-aminophosphonates in ionic liquid and neat conditions; Mudumala Veeranarayana Reddy, Someshwar D. Dindulkar, Yeon Tae Jeong. Tetrahedron Letters 52 (2011) 4764–4767.
7.    An eco-sustainable green approach for the synthesis of propargylamines using LiOTf as a reusable catalyst under solvent-free condition; Someshwar D Dindulkar, Baek Kwan, Kwon Taek Lim and Yeon Tae Jeong, Journal of Chemical Science 125 (1) 101-107.
8.    Design, synthesis and cytotoxicity of novel N-benzylpiperidin-4-one oximes on human cervical cancer cells; Someshwar D. Dindulkar, Paramasivam Parthiban, Ira Bhatnagar, Rupesh L. Gawade, Vedavati G. Puranik, Se-kwon Kim, Dong Hyun Anh, Yeon Tae Jeong, Journal of Chemical Science, Volume 126, Issue 3, pp 861-873.
9.    Silica supported ceric ammonium nitrate (CAN-SiO2): Efficient catalyst for cascade synthesis of biologically active 3-aryl-3,4-dihydro-1,2,4 benzothiadiazine-1,1-dioxides; Someshwar Dagduappa Dindulkar, Kwon Taek Lim, Byung Kwon Cho, Yeon Tae Jeong, Phosphorus, Sulfur, and Silicon and the Related Elements, 189 (1), 40-51.
10. Lithium Triflate Li(OTf): Highly efficient and reusable catalytic system for the synthesis of diversified quinolines under neat conditions; Amol B. Atar, Someshwer D. Dindulkar, Yeon Tae Jeong,  Monatsh Chem, 144 (5), 695-701.
11.  Supported ceric ammonium nitrate: A highly efficient catalytic system for the synthesis of diversified 2,3-substituted 2,3-dihydroquinazolin-4(1H)-ones;  Someshwar D. Dindulkar, Jeongsu Oh, Veenita M. Arole , Yeon Tae Jeong;  Comptes Rendus Chimie 17 (10), 971-979.
12. Microbial cyclosophoraose as a catalyst for the synthesis of diversified indolyl 4 H-chromenes via one-pot three component reactions in water; Someshwar D Dindulkar, D Jeong, E Cho, D Kim, S Jung; Green Chemistry., 2016,18, 3620-3627.
13. Functionalized β-cyclodextrin as supramolecular ligand and their Pd (OAc) 2 complex: highly efficient and reusable catalyst for Mizoroki–Heck cross-coupling reactions in aqueous medium; Someshwar D Dindulkar, Daham Jeong, Hwanhee Kim, Seunho Jung; Carbohydrate research, 430, 2016, 85–94.
14. Preparation of a Novel Chiral Stationary Phase Containing Rhizobial Cyclic β‐(1→ 2) Glucans for the Chiral Separation of Some Flavonoids; D Jeong, H Kim, SD Dindulkar, JY Lee, S Jung; Bulletin of the Korean Chemical Society 36 (9), 2379-2382.
15. Cyclosophoraose/cellulose hydrogels as an efficient delivery system for galangin, a hydrophobic antibacterial drug; Daham Jeong, Hyun ki Kim, Jae-pil Jeong, Someshwar D Dindulkar, Eunae Cho, Yung-Hun Yang, Seunho Jung; Cellulose, 2016, 23, 4, 2609–2625.
16. Regioselective self-acylating cyclodextrins in organic solvent; Eunae Cho, Deokgyu Yun, Daham Jeong, Jieun Im, Hyunki Kim, Someshwar D Dindulkar, Youngjin Choi, Seunho Jung; Scientific Report, 2016; 6: 23740.
17. Succinoglycan Octasaccharide Conjugated Polydiacetylene‐Doped Alginate Beads for Barium (II) Detection; Deokgyu Yun, Eunae Cho, Someshwar D Dindulkar, Seunho Jung; Macromolecular Materials and Engineering, 2016, 301, 7, 805–811.
18. A synthetic encapsulating emulsifier using complex-forming pentacosadiynoyl cyclosophoraoses (cyclic β-(1, 2)-D-glucan); Hwanhee Kim, Someshwar D. Dindulkar, Daham Jeong, Seyeon Park, Bong-Hyun Jun, Eunae Cho, Seunho Jung; Journal of Industrial and Engineering Chemistry Volume 44, 2016, Pages 195–203.
19. Characterization and regulated naproxen release of hydroxypropyl cyclosophoraosepullulan microspheres, Jae Min Choi, Benel Lee, Daham Jeong, Kyeong Hui Park, Eun-Ji Choi, Yong-Joon Jeon, Someshwar D. Dindulkar, Eunae Cho, Sun Hee Do, Kyungho Lee, Im-Soon Lee, Seyeon Park, Bong-Hyun Jun, Jae-Hyuk Yu, Seunho Jung; Journal of Industrial and Engineering Chemistry, 48, 25,2017, 108–118.

20. Solubility and bioavailability enhancement of ciprofloxacin by induced oval-shaped mono-6-deoxy-6-aminoethylamino-β-cyclodextrin, Jae Min Choi, Kyeonghui Park, Benel Lee, Daham Jeong, Someshwar D Dindulkar, Youngjin Choi, Eunae Cho, Seyeon Park, Jae-hyuk Yu, Seunho Jung, Carbohydrate Polymers, 163, 2017, 118–128.

Paper presented at National & International Conferences

Details of Publication
National:-
-
International (In India):-

  • Presented: “Synthesis of 1-Benzylpiperidine-4-one analogs and their stereochemical study using NMR spectroscopy and single crystal XRD” [2010] KCS, Daegu, South Korea..
  • 3rd Frontiers in Organic Synthesis Technology" Conference held at Budapest, Hungary (FROST3) on October 11th-13th, 2011.
  • 13th Tetrahedron Symposium – Taipei, Taiwan.

International (Abroad):-
Worked as Research assistant professor at Konkuk university in the department of Bioscience and Biotechnology, Seoul, South Korea. (1st March 2015 to 28th Feb. 2017)

 

 

 

 

 

Dr S. B. Sapkal


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Thiamine Hydrochloride (VB1) in Water: A Privileged Synthetic Route for Benzimidazole Derivatives. Gadekar S. S., Sapkal, S. B., Madje B. R. Int. J. Green Chem.2016, 2, 1-8.
2. Thiamine Hydrochloride (VB 1 ) Catalyzed Synthesis of 3-Amino Alkylated Indoles
Suchita S. Gadekar , Suryakant B. Sapkal  , Ramesh M. Shingare  , Balaji R. Madje submitted to “Bionano Frontier Journal.
3. Citric acid/SiO 2 : A Sustainable Protocol for the Synthesis of β-Enaminones  journal of Medicinal Chemistry and Drug Discovery 2016.
4. Acidic Ionic Liquid catalyzed environmentally friendly synthesis of benzimidazole derivatives. Sapkal, S. B.; Shelke, K. F.; Sonar, S. S.; Shingate, B. B.; Shingare, M. S. Bull. Catal. Soc. Ind. 2009, 2, 78.
5.         Ammonium metavanadate: A novel catalyst for synthesis of a-aminophosphonates,  Sapkal, S. B. Bull. Cat. Soc. India. 2009, 8; 131.
6.         An effective synthesis of 3-(5-aryl-[1,3,4] oxadiazol-2yl)-1H indazole derivatives. Sonar, S. S.; Sapkal, S. B.; Kategaonkar, A. H.; Shingate, B. B.; Karale, B. K.; Shingare, M. S. Org. Chem.: An Ind. J., 2009, 5.
7. Microwave-assisted an one-pot three component synthesis of 1,4-dihydropyrano [2,3-c] pyrazoles under solvent-free condition. Shitole, N. V.; Shelke, K. F.; Sapkal S. B.; Shingate, B. B.; Shingare, M. S. Organic Chemistry An: Indian Journal 2009, 5, 4.

International:-
 1.        Nickel Nanoparticle Catalyzed Facile and Efficient One-Pot Synthesis of Polyhydroquinoline Derivatives via Hantzsch Condensation Under Solvent-free Conditions. Sapkal, S. B.; Shelke, K. F.; Shingate, B. B.; Shingare, M. S. Tetrahedron Lett. 2009, 50, 1754.
2. 1-Butyl-3-methyl imidazolium hydrogen sulphate promoted one-pot three-component synthesis of amidoalkyl naphthols. Sapkal, S. B.; Shelke, K. F.; Madje, B. R.; Shingate, B. B.; Shingare, M. S. Bull. Korean Chem. Soc. 2009, 30, 2887.
3.         Dual role of ammonium acetate for solvent-free synthesis of 1,3-disubstituted-2,3-dihydro-1H-naphth-[1,2e] [1,3]-oxazines. Sapkal, S. B.; Shelke, K. F.; Kategaonkar, A. H.; Shingare, M. S. Green Chem. Lett. Rev. 2009, 2, 57.
4. Nickel Nanoparticles: An Ecofriendly and Reusable Catalyst for the Synthesis of 3,4-Dihydropyrimidine-2(1H)-ones via Biginelli Reaction. Sapkal, S. B.; Shelke, K. F.; Shingate, B. B.; Shingare, M. S. Bull. Korean Chem. Soc. 2010, 31, 351.
5.         An efficient one-pot strategies for the synthesis of [1,3]oxazine derivatives S. . Sapkal, S. B.; Shelke, K. F.; Shingate, B. B.; Shingare, M. S. J. Korean Chem. Soc. 2010, 54, 437.
6.         An efficient synthesis of benzofuran derivatives under conventional/non- conventional method . Sapkal, S. B.; Shelke, K. F.; Shingate, B. B.; Shingare, M. S. Chinese Chem. Lett. 2010, 21, 1439-1442.
7.         Natural catalyst: highly efficient green protocol for Knoevenagel condensation in water. Sapkal, S. B.; Shelke, K. F.; Shingate, B. B.; Shingare, M. S. Shingare. Green Chem Lett. Rev.2010, (Revised).
8.         NaHSO4/SiO2: An efficient catalyst for the synthesis of β-enaminone and 2-methylquinolin-4(1H)-one derivatives under solvent-free condition. Sapkal, S. B.; Shelke, K. F.; Shingate, B. B.; Shingare, M. S. J. Korean Chem. Soc. 2010, (In Press).
9.         Ultrasound-assisted one-pot synthesis of 2,4,5-triarylimidazole derivatives catalyzed by ceric ammonium nitrate in aqueous media. Shelke, K. F.; Sapkal S. B.; Shingare, M. S. Chinese Chemical Letters 2009, 20, 283.
10.       Boric acid as an efficient catalyst for the synthesis of 1,1-diacetate under solvent-free condition Shelke, K. F.; Sapkal S. B.; Kakade, G. K.; Shinde, P. V.; Shingate B. B.; Shingare, M. S. Chinese Chemical Letters 2009, 20, 1453.
11.       An efficient synthesis of 2,4,5-triaryl-1H-imidazole derivatives catalyzed by boric acid in aqueous media under ultrasound-irradiation. Shelke, K. F.; Sapkal S. B.; Sonar, S. S.; Madje, B. R.; Shingate, B. B.; Shingare, M. S. Bull. Korean Chem. Soc. 2009, 30, 1057.
12.       An efficient ionic liquid promoted Knoevenagel condensation of 4-oxo-4H-benzopyran-3-carbaldehyde with Meldrum’s acid. Shelke, K. F.; Sapkal S. B.; Madje, B. R.; Shingate, B. B.; Shingare, M. S. Green Chem. Lett. Rev. 2009, 2, 3.
13.       Microwave-assisted synthesis of 1,2-benzisoxazole derivatives in ionic liquid. Shelke, K. F.; Sapkal S. B.; Shitole, N. V.; Shingate, B. B.; Shingare, M. S. Organic Commun. 2009, 2, 72.
14.       Microwave-assisted synthesis of 3-styrylchromones in alkaline ionic liquid. K. Shelke, K. F.; Sapkal S. B.; Shitole, N. V.; Shingate, B. B.; Shingare, M. S. Bull. Korean Chem. Soc. 2009, 30, 2883.
15. An efficient and green procedure for the preparation of acylals from aldehydes catalyzed by alum [KAl(SO4)2•12H2O]. Shelke, K. F.; Sapkal S. B.; Kategaonkar, A. H.; Shingate, B. B.; Shingare, M. S. Shingare, South African J. Chem. 2009, 62, 109.
16. Cellulose sulphuric acid as a biodegradable and reusable catalyst for the Knoevenagel condensation. Shelke, K. F.; Sapkal S. B.; Niralwad, K. S.; Shingate, B. B.; Shingare, M. S.Central European J. Chem. 2010, 8, 12.
17.       Alum catalyzed simple and efficient synthesis of 5-arylidene-2,4-thiazolidinedione in aqueous media. Shelke, K. F.; Sapkal S. B.; Sadaphal, S. A.; Shingate, B. B.; Shingare, M. S. Green Chem Lett. Rev. 2010, 3, 17.
18. .Cellulose sulfuric acid as a bio-supported and recyclable solid acid catalyst for the one-pot synthesis of 2,4,5-triarylimidazoles under microwave-irradiation. Shelke, K. F.; Sapkal S. B.; Shingate, B. B.; Shingare, M. S. Green Chem Lett. Rev. 2010, 3, 27.
19.Synthesis and in vitro antimicrobial activity of new α-aminophosphonates via tetrazolo [1,5-a] quinoline derivatives. Kategaonkar, A. H.; Sonar, S. S.; Sapkal, S. B.; Gawali, V. U.; Shingate, B. B.; Shingare, M. S. Phosphorus Sulfur Silicon and Relt. Elem. 2010, 185, 2113.
20.       Synthesis of new 4-(4,5-diphenyl-1H-imidazol-2-yl)tetrazolo[1,5-a]quinolines from tetrazolo[1,5-a]quinolines. Kategaonkar, A. H.; Sapkal, S. B.; Madje, B. R.; Shingate, B. B.; Shingare, M. S. Chemistry of Heterocyclic Compounds 2010, 6, 754.
21        An efficient one-pot synthesis of anthraquinone derivatives catalyzed by alum in aqueous media. Madje, B. R.; Shelke, K. F.; Sapkal S. B.; Kakade, G. K.; Shingare M. S. Green Chem Lett. Rev. 2010, 3, 269-273.
22.       A Simple and Green Synthesis of Tetrahydrobenzo[a]-xanthen-11-one Using PEG-400 As Efficient and Recyclable Reaction media Shitole, N. V.; Sapkal, S. B.; Shingate, B. B.; Shingare, M. S. Bull. Korean Chem. Soc. 2010, 32, 35-36.

Paper presented at National & International Conferences

Details of Publication
National:-
1. First Price: Pre-Sci. Congress At Dr. BAMU (Oral presentation)
2.New emerging trends in Environmental to Control and
Prevent pollution at Pratisthan College Paithan.
3. Science Academies Lecture Workshop on Probing Electronic States in Molecules and Molecular materials (Oct-2010).
4“Catalysis for Sustainable Energy and Chemicals” at National Chemical Laboratory, Pune, India (Jan-2009).
5.  “Biocatalysis and Biomimetic Catalysis in Organic Synthesis” at Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, India (March-2009).

6. SET Workshop in Chemistry at Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, India (Oct-2007).
7. “43 rd Annual Convention of Chemist” at Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, India (Dec-2006).
8“Kinetic and Mechanistic Studies of Chemical and Biochemical Transformations” at Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, India (Feb-2005).
International (In India):-
1. International  Conference:  On  Emerging  Trends & Innovation  In  Indian Institute of Chemical Technology, Hyderabad  (Icei-2017)
2.“Bridging Gaps in Discovery and Development: Chemical & Biological Sciences for Affordable Health, Wellness & Sustainability” at Saurastra University, Rajkot, Gujarat
(Feb-2011)
3.  International Conference on “Interplay of Chemical and Biological Sciences” at University of Delhi, Delhi, India (Feb-2009).
4.  International Conference on “Advances in Drug Discovery Research” at Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, Maharashtra, India (Feb-2007).

International (Abroad):-
1.
2.

 

Dr A. B. Itolikar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- Nil
International:-

  • “Microwave Dielectric Properties and Emissivity Estimation of Freshly cut Banana Leaves at 5GHz”, International Journal of Advances in Remote Sensing and GIS, Vol. 5, No. 1, 2017 ISSN:2277-9450,pp. 58-66
  • “Microwave Dielectric Properties of Algae” BIONANO FRONTIER, Vol.8, Issue-3, ISSN 0974-0678(Print), 2320-9593(Online), pp.371-374.
  • “Dielectric Properties of Freshly Cut Rubber Leaves at 5GHz Microwave Frequency” Communicated to Indian Journal of Radio and Space Physics(CSIR Journal)
  • Dielectric Properties of Lonar Lake Saline Soil at 5GHz”, Science Park  Research Journal, ISSN:2321-8045, Jan -2015, pp.144-152, Impact Factor: 1.6200[UIF-2013]
  • “Least Square Fitting Method and Application to Estimate Microwave Permittivity”, Journal of Basic and Applied Sciences, Special Issue, NSRMIPS-Feb-2014, NSRMIPS-Feb-2014 ISSN-2229-3302 pp.21-25.
  • “Dielectric Properties of Ankaleshwar Saline  Soil at 5GHz”, Journal of Advances in Applied Sciences and Technology, Special Issue,  Vol.1,Issue 2, ISSN 2393-8188(Print)2393-8196(Online), pp.255-259.
  • “Water Purification Using Nano-Filtration Membrane and Reverse Osmosis-Review” International Journal of Advances in Management, Technology and Engineering Sciences. Vol. 1, Issue 08(II), May. 2012. ISSN:2249-7455.pp. 23-26)

Paper presented at National & International Conferences

Details of Publication
National:-

  • “Technical Education and Skill Development for Make in India: Issues & Challenges” Proceeding of National Conference “Make in India –The Road Ahead” MGM’s Institute of Management, Aurangabad. 30-31 Oct-2015 pp.1-4

International (In India):-

  • “Dielectric Properties of Gujarat and Uttar Pradesh Saline Soils at 5GHz”, 11th International Conference on Microwaves, Antenna, Propagation and Remote Sensing (ICMARS-2015), Dec.15-17, 2015, Jodhpur, India.pp.87-91.

International (Abroad):-        NIL

Dr. L. D. Chavan


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- NIL
International:- 05
1. KSF supported 10-molybdo-2-vandophosphoric acid as an efficient and reusable catalyst for one-pot synthesis of 2,4,5-trisubstituted imidazole derivatives under solvent-free conditions, Chinese Journal of Catalysis, Vol. 36, 2015, 1054-59, ISSN: 1872-2067
2. Environmentally benign synthesis of 1,8-dioxooctahydroxanthene derivatives using 10-molybdo-2-vanadophosphoric acid as an efficient and reusable catalyst under solvent-free condition, Iranian Journal of Catalysis, 6(2), 2016, 99-105, ISSN NO: 2252-0236
3. Kinetics and mechanism of oxidation of semicarbazide by Keggin-type 12-tungstocobaltate (III) in acidic medium, Der Pharmacia Sinica, Vol. 6(10), 2016, 31-37, ISSN 0976-8688
4. Kinetics and Mechanistic Study of Oxidation of Atenolol Drug in Acidic Medium by 12-Tungstocobaltate(III), Journal of Chemistry and Chemical Sciences, 6(1), 2016, 1-8, ISSN NO: 2229-760X
5. Kinetics and Mechanism of Oxidation of Guaifenesin by Keggin type 12-tungstocobaltate (III) in acidic medium, Research Journal of Chemical Sciences, 6(7), 2016, 29-34, ISSN NO: 2231-606X

Paper presented at National & International Conferences

Details of Publication
National:- 02
1. Presented research paper entitled “KSF supported 10-Molybdo-2-Vanadophosphoric acid as an efficient and heterogeneous catalyst for the one pot synthesis of 2,4,5-trisubstituted imidazole derivatives” in national conference 51st Annual Convention of Chemist organized by Indian Chemical Society at Kurukshetra, HR during 09th to 12th Dec. 2014
2. Presented poster entitled “Environmentally benign synthesis of 2H-indazolo[2,1-b]phthalazine-triones using montmorillonite K-10 supported 11-molybdo-1-vanadophosphoric acid (H4PMo11V1O40/K-10) catalysts under solvent-free condition”in a national conference “ Frontiers in chemical sciences and drug development” organized by Department of Chemisty, Dr. B.A.M.U., Aurangabad during 17th and 18th March 2017.

International (In India):- NIL

International (Abroad):- NIL

Dr G.C. Lomte


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- NIL
International:- 04

  • Maximum Principles for Fourth Order Nonlinear Elliptic Equations with Applications, D.B.Dhaigude, R.M. Dhaigude and Gajanan.C. Lomte, Bol. Soc. Paran. Mat., (3s) V.32 1(2014): 9-15.
  • Maximum Principles for Fourth Order Semilinear Elliptic Equations with Applications, R.M. Dhaigude and G.C. Lomte, Malaya Journal of Mathematik,

Vol.1, 3 (2013) 44- 48.
      3.    Maximum Principles for Diffusion-Reaction Problems with Applications,
             R. M. Dhaigude and Gajanan.C. Lomte, International J. of Pure & Engg. Mathematics        
            (IJPEM), Vol. 2 II (2014), 57-67.

  •  Maximum Principles for Fourth Order Semilinear Elliptic Equations with Applications, International Journal of Pure and Applied Mathematical Sciences.Vol. 7, 2 (2014), 285-290.

Paper presented at National & International Conferences

Details of Publication
National:- 01
1. Paper presented on “Maximum principles for fourth order semilinear elliptic equations with applications” in National Conference on Recent Trends in Pure and Applied Mathematics, at N.E.S. Science College, Nanded.
International (In India):- NIL

International (Abroad):- NIL

 

Dr. T. S. Pawar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- NIL
International:- 09

  • Kirtiwant P. Ghadle, Tanaji S. Pawar, Solution of Linear Programming Problem by New Approach, International Journal of Engineering and  Innovative Technology, ISSN: 2277-3754, Volume 3, Issue 6, December 2013, pp.301-307.

 

  • Kirtiwant P. Ghadle and Tanaji S. Pawar, New Approach for Revised Simplex Method to Solve Linear Programming Problem, International Scientific Journal on Science Engineering & Technology, ISSN: 6814-4794, Vo1ume 17, No. 06, July 2014, pp.653-656.
  • Kirtiwant P. Ghadle, Tanaji S. Pawar, Game Theory Problems by an Alternative Simplex  Method, International Journal of Research in Engineering and Technology, eISSN: 2319-1163, pISSN: 2321-7308, Volume: 03, Issue: 05, May-2014, pp.900-905.

 

  • Kirtiwant P. Ghadle and Tanaji S. Pawar, New Approach for Two-phase Method to Solve Linear Programming Problem, International Scientific Journal on Science Engineering & Technology, ISSN: 2349-6657, Vo1ume 17, No. 08, September 2014, pp.835-838.
  • Kirtiwant P. Ghadle, Tanaji S. Pawar, New Approach for Wolfe’s Modified Simplex Method to Solve Quadratic Programming Problems, International Journal of Research in Engineering and Technology, eISSN: 2319-1163, pISSN: 2321-7308, Volume: 04, Issue: 01, Jan-2015, pp.371-376.

 

  • Kirtiwant P. Ghadle and Tanaji S. Pawar, New Approach for Simplex Method to Solve Linear Programming Problem, International Journal of Extensive Research, e-Print ISSN: 2394-0301, April 2015.
  • Kirtiwant P. Ghadle and Tanaji S. Pawar, An Alternative Method for Solving Linear Fractional Programming Problems, International Journal of Recent Scientific Research, ISSN: 0976-3031, Vol. 6, Issue, 6, pp.4418-4420, June, 2015.

 

  • Kirtiwant P. Ghadle, Tanaji S. Pawar, Quadratic Programming Problems-Special Case-Alternative Method, International Journal of Latest Technology in Engineering, Management & Applied Science, ISSN: 2278-2540, Volume IV, Issue VI, June 2015.
  • Kirtiwant P. Ghadle, Tanaji S. Pawar, Quadratic Fractional Programming Problem-Special Case-Alternative Method, Mathematics and Computer Science Journal, 1, 31-36, Feb 2016.

 

Paper presented at National & International Conferences

Details of Publication
National:- Nil

International (In India):- Paper presented on “New Approach of Linear Programming Problem for Simplex Method” in International Conference on Recent Advances in Mathematics, Department of Mathematics, Rashtrasant Tukadoji Maharaj Nagpur University, Nagpur (M.S.), India.

International (Abroad):- NIL

 

Ms J.G. Gawai


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- . Kinetics & mechanistic oxidation of  4-Hydroxybenzaldehyde using Potassium permanganate. National Journal of Medicinal chemistry and drug discovery ISSN NO: 2347-9027
Page no   715-790.…

International:-
1. Kinetics & mechanistic  oxidation of  3- Ethoxy -4-Hydroxybenzaldehyde using Potassium permanganate. International Journal of chemistry ie Rasayan J chem., Vol.8 No 1/123-132/Jan- March/2015.
ISSN:0974-1496/e-ISSN: 0976-0083/CODENRJCA .
2.  Kinetic Oxidation of L-Lysine by NBP in aqueous acetic acid medium. InterNational peer reviewed  Journal of Medicinal chemistry and drug discovery ISSN NO: 2347-9027
Feb 2016.

Paper presented at National & International Conferences

Details of Publication
National:-
1.Nil
2.Nil

International (In India):-
1.Nil

International (Abroad):-
1.Nil

 

Mr. S. R. Khillare


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-01
1.Mathematics for better Cricket, Bulletin of Marathwada Mathamatical Society,Aurangabad
International:-Nil
 

Paper presented at National & International Conferences

Details of Presentation
National:-02
1.Study of solutions of fractional differential equations, North Maharashtra University ,Jalgaon,Maharashtra,2014
2.Mathematics for better cricket ,Yashvantrao Chavan Institute of Science-Satara,Maharashtra,2006
International (In India):-Nil
International (Abroad):- Nil

 

 

 

 

Ms Kranti Zakde


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Role of teachers in National Integration, Role of teachers in Promoting National Integration,Pease an Sustainable communal harmony, ISBN : 978-81-923835-5-2
9 Feb 2014pg 14-19
2.

International:-
1. A low cost veasatile data acquisition system, Science Park  Research Journal, Pg.196-202 Jan  
     2015. ISSN :2321-8045 ,Impact Factor: 1.6200[UIF-2013]
2. Self similarity and fractal character in leaves, Journal of Chemical , Biological and Physical
     Sciences , An international peer review E-3 Journal of Sciences,CDDEN USA, May 2014-JULY
     2014, Vol.4,No.3; pg 3587-3592 , ISSN:2249-1929
3. Time Course of Evaluation of Dendritic Clusters In Electrodeposition, Journal of Advances in
     Applied Science and Technology Material Science Special issue, Vol.1,Issue 2,pg 20-25 , ISSN
     2393-8188  ,December 2014
4. Nanotechnology and Environmental pollution, International Journal of Advances in Management, Technology and Engineering Sciences, Vol. 1, Issue 6(X), pg.58-63, March 2012. ISSN:2249-7455.
5. E-Waste Management, International Journal of Advances in Management, Technology and Engineering Sciences, Vol. 1, Issue 6(X), pg.58-63, April 2012. ISSN:2249-7455
6. Global warming- causes and its impact, International Research Journal of Humanities and Environmental Issues(IRJHEI), Vol. 1, Issue 2, pg. 86-90, May 2012. ISSN:2277-9329
7. Desalination and filtration of polluted water using Nanotechnology, International Journal of Advances in Management, Technology and Engineering Sciences, Vol. 1, Issue 12(III), pg.168-171, Sept. 2012. ISSN:2249-7455

Paper presented at National & International Conferences

Details of Publication
National:-
1. Role of teachers in National Integration, Role of teachers in Promoting National Integration,Pease an Sustainable communal harmony, ISBN : 978-81-923835-5-2
9 Feb 2014pg 14-19
2. National level conference on Recent Trends in Science and Engineering, Dr.D.Y.Patil School of Engg and Technology,Pune
3. National Workshop on Emerging Trends in Geospatial Technology for smart city, Dept. of Computer Science & Information Technology,Dr.Basaheb Ambedkar Marathwada University,Aurangabad
4.Indian Science Congress 2016 at Mysuru
5. Indian Science Congress 2016 organised by S.V. University , at Tirupati
6. National seminar on Innovations in Science and Technology for Inclusive Development, Indian Science Congress in association with ISLS Kanpur,& Dept of Zoology, Dr.Basaheb Ambedkar Marathwada University,Aurangabad
International (In India):-
1. A low cost veasatile data acquisition system, Science Park  Research Journal, Pg.196-202 Jan  
     2015. ISSN :2321-8045 ,Impact Factor: 1.6200[UIF-2013]
2. Self similarity and fractal character in leaves, Journal of Chemical , Biological and Physical
     Sciences , An international peer review E-3 Journal of Sciences,CDDEN USA, May 2014-JULY
     2014, Vol.4,No.3; pg 3587-3592 , ISSN:2249-1929
3. Time Course of Evaluation of Dendritic Clusters In Electrodeposition, Journal of Advances in
     Applied Science and Technology Material Science Special issue, Vol.1,Issue 2,pg 20-25 , ISSN
     2393-8188  ,December 2014
4. Nanotechnology and Environmental pollution, International Journal of Advances in Management, Technology and Engineering Sciences, Vol. 1, Issue 6(X), pg.58-63, March 2012. ISSN:2249-7455.
5. E-Waste Management, International Journal of Advances in Management, Technology and Engineering Sciences, Vol. 1, Issue 6(X), pg.58-63, April 2012. ISSN:2249-7455
6. Global warming- causes and its impact, International Research Journal of Humanities and Environmental Issues(IRJHEI), Vol. 1, Issue 2, pg. 86-90, May 2012. ISSN:2277-9329
7. Desalination and filtration of polluted water using Nanotechnology, International Journal of Advances in Management, Technology and Engineering Sciences, Vol. 1, Issue 12(III), pg.168-171, Sept. 2012. ISSN:2249-7455
International (Abroad):-
1.
2.

Research EEP

Mr. B. T. Deshmukh


Publications in Peer Reviewed National & International Journals

Details of Publication
International:-

  1. "Review overhead line fault detection using GSM technology", IJAREEIE- DEC-2016,vol-5
  2. "Detection of power quality disturbances using discrete wavelet transform"

                IJAREEIE-OCT-2015-VOL-4

  1. "A photovoltaic power generation system with peak cut function”,

               IJSEAE-JUNE-2015-VOL-1

  1. "Development of web based SCADA application for monitoring parameters of transformer",

               IJETR-APRIL-2016-VOL-4

Paper presented at National & International Conferences

Details of Publication
International (In India):-
1."Generation of power quality disturbances using MATLAB -Simulink", IEEE conference-Chennai-2015
2. "Detection and characteristics of voltage SAG using Matlab-Simulink", IEEE conference-Chennai-2015

 

 

 

 

Ms. Anjali V. Naik


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Control of Doubly Fed Induction Wind Generator under Unbalance Grid Voltage Condition
2.Simulation of Merged AC and DC System for Power Upgradation.

International:-
1.
2.

Paper presented at National & International Conferences

Details of Publication
National:-
1. Control of Doubly Fed Induction Wind Generator under Unbalance Grid Voltage Condition
2. Power Enhancement of Transmission Lines by combining AC and DC by using MATLAB/ Simulink

International (In India):-
1.
2.

International (Abroad):-
1.
2.

Research ENTC

Dr V. B. Malode


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- nil

International:- 12
1) “PAPR reduction using Modified Selective Mapping technique”   International Journal of Advanced Networking and Applications Eswar Publications, Indian, Australia, USA,W-3/133-C, Sivasakthi Colony, Udumalpet – 642126.,Tamil Nadu. India, Sep-Oct2010, volume2, Issue2.,pp626-630, ISSN 0975-0290
2) “Performance of Linear Block Coded OFDM System in BER and PAPR  Under different channels”  International journal of applied information system, July2012, Published by foundation of computer science, New York, USA HARVARD UNIVERSITY AND NASA. VOLUME3,NO-4,pp 6-12, ISSN-2249-0868,
3) “GENERATION OF PWM WITH HIGH FREQUENCY USING FPGA”  International Journal of Emerging Technologies and applications in Engineering ,Technology and Science, Volume4,Issue1, Jan2011-June2011,pp278-280
ISSN0974-3588
4) “FPGA BASED PWM CONTROLLER FOR THREE PHASE INVERTER”,  International  journal of science and advanced technology, Volume1,  8 October2011,pp 168-171,  ISSN2221-8386
5) “PWM Based system control using FPGA",  International Journal of Computer Science Issues , IJCSI March2012 Volume9,issue2,  ID- IJCSI2012-9-2-1689
6)“A Novel approach for solution of next generation physical layer  challenges”,
International Journal of computer applications  (IJCA),published by foundation of computer science new year York USA,Vol. ICCIA,No.5, March 2012,pp.101,  ISBN:978-93-80866-63-8
7) “Movement Based voice enabled robotics chair for physically challenged”,
International Journal of computer science and network (IJCSN), Volume2,Issue1, FEB2013,pp. ISSN:2277-5420
8)  "A Lifting Based scheme for Image Compression using VHDL " ,  International Journal of Scientific Engineering and Techology Research,May-2014, vol.03,Issue-06,pp.0991-0996., ISSN2319-8885 
9) " Performance prediction of DAB modulation and transmission using Rayleigh fading channel",   International Journal of Emerging trends and technology in computer science(IJETTCS), July-August 2014,Vol.3,Issue4,ISSN2278-6856,pp.364-367,  ISSN2278-6856
10) "  BER with different modulation schemes in OFDM System",  International Journal of Advanced Research in Electronics and communication Engineering(IJARECE),Vol 3,issue12,Dec2014,ISSN:2278-909X,pp.1960-1910,  ISSN:2278-909X
11) " PAPR Reduction in OFDM system using QPSK Modulation and Companding Technique",  International Journal of Emerging trends and technology in computer science(IJETTCS), July-August 2014,Vol.3,Issue4,ISSN2278-6856,pp.281-284,  ISSN2278-6856
12)  "Automation of Number Plate Detection System to Extract
Various Fonts",  International Journal on Computing, Communications and Systems (IJCCS), Vol-4,Issue-2 (December-2015) pp69-73, ISSN:2277-6699
13) "Computerized Approaches for Retinal Microaneurysm Detection", International Journal on Recent and Innovation Trends in Computing and Communication , Volume: 4 Issue: 6,pp.37-42,May2016, ISSN: 2321-8169

Paper presented at National & International Conferences

Details of Publication
National:- 13
  1)  “Embedded Electronics in electro mechanical System for Automotive   application”   Jan 2005- IETE Vadodara.
 2) “Bluetooth Transceiver Design With VHDL AMS
“ AmoghsiddhEducation Society,  Sangali- Oct.2005.
 3)  “Hardware Implementation of RC4 stream cipher
 for Wi-Fi security “ 16th  & 17th Sept 2009 National conference on Mobile
 and Pervasive computing [NCMPG-09], karnatka
 4)  “Automated Vehicle” CSIP JNEC Aurangabad-April 2006
 (Participated in the poster   session )
 5)   “Embedded Based Train accident Preventor” 9th &10th Mar.2007
Dr. Vithalrao V. Patil  college of Engg., Ahmednagar.
 6)   “GSM based automation system’,16TH & 17TH  April 2007,
Rajashri shahu college, Pune
  7)   “MIMO OFDM for fourth generation WLAN” 8TH & 9th Feb2008
KCE at Jalgaon.
 8)   “FPGA based PWM controller for single phase inverter’
29th & 30th March 2008 at LONI
 9)  “VLSI chip for Tree based code” 8th and 9th Jan 2009 at
Aurangabad  ACES’09  National  conference
  10)  “ Channel coding for WLAN using WI-FI” ,TECHNOEVOLUTION-2K9,
 29TH JAN 2009 at Sangamner.
 11) “Selective mapping technique using linear block code to reduce peak to
average power ratio of OFDM signal” ,  30th and 31st Oct2009 
National Conference on New generation wireless communication technologies
 at CTEA, L&T Institution Pawai Mumbai Organized jointly with IEEE Bombay Section and Computer Society
12) “OFDM based Wireless LAN Reciever”, 9th &10th Feb2010
 National conference on  advanced technology NIRMITI-2010,at PIET,Nagpur.
13) “Generation of PWM with high frequency using FPGA”,
 National conference on Recent  trends in technology   3rd  &  4th FEB2011,
 J.T. Mahajan College OF Engineering , Faizpur

International (In India):- 14
1) “Peak to average power ratio of OFDM QPSK-DQPSK” , 6th Feb2010,International Conference on Information Science and Applications ICISA2010 at Panimalar Engineering College ,Chennai, India. pp.216-220, ISBN 978-81-907677-9-8 ,V.B.MALODE  B.P.PATIL
2) “High Resolution PWM using FPGA” 1ST and 2nd April2010,International conference on Science, Engineering and Spirituality,(ICSEC10) at S.E.S.College of Engineering Navalnagar Organized jointly with IEEE Bombay Section and Computer Society,V.B.MALODE  Tushar PATIL
3) “ PAPR of OFDM System using selective mapping technique with QPSK and DQPSK” between 23rd to 25th Sept 2011, International Conference on Communication  computation   Management and nanotechnology at Rural Bhalki Engineering college ,  Karnataka , AP. pp.1-5, V.B.MALODE, B.P.PATIL
4)“ A Novel Approach for Solution of Next Generation physical Layer Challenges”, Third international conference on computational intelligence applications ICCIA-2012,11th &12th Feb2012,Nashik ,Maharashtra, India. V.B.MALODE   Amol Kothade
5) “Implementation of Automatic Speaker Recognition on TMS320C6713 Using MFCC”, 2013 International Conference on Computer Communication and Informatics (ICCCI -2013), Jan. 04 – 06, 2013, Coimbatore, INDIA,  V.B.MALODE  A.S.BHALERAO, Same paper published on IEEE Explorer.
 6)“ Hardware Implementation of Image compression technique using wavelet” International conference technovision2014, Sinhgad Institute of Technology Nerhe Pune, April 5th and 6th 2014, Dr.. V.B.Malode,  Ms. Nayana v. Bhosale
 7) “Comparative Study of A-Law and µ-companding technique in OFDM system”,  International Conference on pervasive Computing ICPC2015,8th -10th  JAN2015,vadgaon(BK),pune,India, Dr. V.B.Malode,Ms. Pratibha patil
 8)“Image Compression and enhance using DWT-IDWT on FPGA” International Conference on science and technology (ICST-2K14), S.B.Patil college of Engineering, Indapur,Pune.21-22 FEB-201,   Dr.V.B.Malode,  Ms. Nayana v. Bhosale
9)"Performance prediction of DAB Modulation and transmission using Matlab Modeling” Institute of Research and Journals, ICEECE PUNE,20th july2014 Dr. V.B.Malode, Ms.Anuja Sarvad
10) Automation of Number Plate Detection System to Extract Various Fonts", 4th International Conference on communications , signal processing computing and  information technologies (ICCSPCIT-2015), Malla Reddy College of Engineering & Technology (Autonomous Institution -UGC , Govt. Of India) Maisammaguda , Dhulapally, Secunderabad Miss Neha T.  Kolkar , V.B.MALODE
  11) "Communication Interface For Deaf-Mute People Using Microsoft Kinect"  2016    International Conference on Automatic Control and Dynamic Optimization Techniques (ICACDOT)International Institute of Information Technology (I²IT), Pune  Same paper published on IEEE Explorer.
12) " Morphology Based Approach for Microaneurysm Detection from Retinal Image", International Conference on Automatic Control and Dynamic Optimization Techniques (ICACDOT),International Institute of Information Technology (I²IT),  Pune   Same paper published on IEEE Explorer.
 13) " New Approach of Statistical Analysis for Lung Disease Diagnosis using   Microscopy images", International Conference on Automatic Control and Dynamic Optimization Techniques (ICACDOT),International Institute of Information Technology (I²IT), Pune  Same paper published on IEEE Explorer.
14) "Methodology for identification and classification of  Microaneurysm from Retinal Image" , International conference SmartTech March 27 to 29th  2017, Amity Institution of Information technology , Rajasthan , V.B.malode, Shivani Puranik.
 
International (Abroad):- 02
1) “BER Performance of LBC Coded OFDM in Different Channels”, 2012 3rd IEEE Control and  System Graduate Research Colloquium (ICSGRC 2012) 16 and 17 July 2012 Shah Alam, Malaysia. ,V.B.MALODE  B.P.PATIL  , Same paper published on IEEE Explorer.
2)" PAPR and BER Performance of OFDM system using DQPSK Modulation" , 2015 International Conference on Communications and Network Engineering, ICCNE2015, Chaing Mai  , Thailand, 22 and 22 NOV2015, V.B.MALODE  B.P.PATIL

 

 

 

 

 

 

 

Dr S. N. Pawar


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- Nil

International:-15

  1. A paper entitled, “Controller area network data extraction for automobiles”, is presented in  International Journal Of Advances in Enginering and Technology, March 2012.
  2. A paper  entitled, “Wireless AMR system using ZigBee technology”, is presented in a IJECET (ISSN 0976-6472)Vol.3,Issue July-Sept. 2012.
  3. Prof S N Pawar  , Ms. Vrushali Mane , Ms Abhilasha Sayar ,“Neural based Anomly Intrusion Detection System in Network”, International Journal of Computer Engineering and Applications, Volume V, Issue II, Feb.14.
  4. S.N.Pawar and Abhilasha Sayar, “ Review of Bank Locker Syatem Using Embedded System” International Journal of Advanced Research in Computer and Communication Engineering, Volume 5, Issue 2, February  2016.
  5.   S.N.Pawar and Abhilasha Sayar, “ Securing Bank Locker System Using Embedded System” International Journal of Advanced Research in Computer and Communication Engineering, Volume 4, Issue 8, August  2015.
  6. S.N.Pawar and Priyanka Kadam, “A survey of Segmentation Methods  for Brain Tumor Detection Using Brain MRI” International Journal of Computer Applications, Volume 5, Issue 7, July 2014.
  7. S.N.Pawar and Priyanka Kadam, ““Brain Tumor Segmentation and its Features Extraction by Using T2 Weighted Brain MRI ” International Journal of Advanced Research in Computer and Communication Engineering, Volume 5, Issue 7, July 2016.
  8. S.N.Pawar and Snehal Mane. “A survey paper on economical automated toll system”, International Journal of Computer Engineering and Applications, Volume V, Issue II, April 15.
  9. S.N.Pawar and Snehal Mane, “Image Processing based Economical Automated Toll System Using Raspberry PI ” International Journal of Advanced Research in Computer and Communication Engineering, Volume 5, Issue 2, February  2016.
  10. S. N. Pawar and R. S. Bichkar, “Using Enumeration in a GA-based Intrusion Detection”,     International Journal of Computer Applications (IJCA), Oct., 2012.
  11. S. N. Pawar and R. S. Bichkar, “Using Adaptive mutation in a GA-based Intrusion Detection”, International Journal of Computer Applications (IJCA), July, 2013.
  12. S. N. Pawar and R. S. Bichkar, “Genetic Algorithm with Variable Length Chromosomes for Network Intrusion Detection”, International Journal of Automation and Computing (IJAC), Springer. 
  13. S. N. Pawar, “Intrusion Detection in Computer Network using Genetic    Algorithm Approach: A Survey”, International Journal of Advances in Engineering & Technology (IJAET), May, 2013.
  14. S. N. Pawar and R. S. Bichkar, “Using GA-based Decision Tree for           Intrusion Detection”, International Journal of       Applied Information Systems (IJAIS).
  15. S. N. Pawar and R. S. Bichkar, “Selecting GA Parameters for Intrusion    Detection”, International Journal of Applied Information Systems (IJAIS), 6(7):15-20, Jan., 2014.

Paper presented at National & International Conferences

Details of Publication
National:-19

  1.     A paper on “EEG Feature Extraction using Wavelet transform” is presented in a National Conference on “Emerging Trends in Mechatronics ”at MIT Engg. College, Aurangabad.
  2. A paper on “Network Management System” is presented in a National Conference on “Quality Engineering Education through Networking of Institutions”at PSG College of  Engineering , Coimbatore during 4th &5th March 2005.
  3.   A paper on “Supernet” is presented in a National Conference on “Advances in Electronics &Telecommunication Engineering ”at College of Engineering, Osmanabad during 25th, 26th Feb 2005.
  4.     A paper on “MEMS” is presented in a National Conference on “Advances in Electronics &Telecommunication Engineering ”at College of Engineering , Osmanabad during 25th ,26th Feb 2005.
  5.      A paper on “Internet Telephony : Gateway Location Protocol” is presented in a National Conference on “Advances in Electronics & Telecommunication Engineering ”at College of Engineering , Osmanabad during 25 th,26 th Feb 2005.
  6.      A paper on “Network Management ” is presented in a National Conference on “Embedded systems and Emerging Trends ”at IETE Sub center ,Vadodara during 29 th,30th Jan 05.
  7.     A paper on “MEMS: A21st century Technology ” is presented in a National Conference on “Embedded systems and Emerging Trends ”at IETE Sub center ,Vadodara during 29 th,30 th Jan 05.
  8.     A paper on “CDMA:2G to 3G Evolution” is presented in a National Conference on “Embedded systems and Emerging Trends” at IETE Sub center ,Bangalore.
  9.     A paper on “Microcontroller based High intensity discharge Lamp Ballast System ” is presented in a National Conference on “Sun Rising Technologies ”at Parshvanath college of Engineering ,Thane during 18th ,19th  Nov 2005.
  10. A paper entitled “Automatic milk Analyser using embedded system” is presented in a National symposium on “Instrumentation” organized at the Institute of Technology and Management, ITM University, Gwalior during 12 th to 15 th Oct 2006.
  11. A paper entitled, “Switching Analyzer”,is presented in a National conference on Advanced Computing  & computer networks NCACCN 2007  organized  by Dr.V.K..Patil college of Engineering, Ahmednagar, Maharashtra on 9th &10th March 2007
  12. A paper entitled, “Advanced pulse charger”, is presented in  National conference ORION 2008 organised  by Pravara Rural Engineering college Loni  ,Maharashtra on 29th &30th March 2008.
  13.  A paper entitled , “An effective call admission control for wireless Adhoc networks”, is presented in a National conference NCECA-08 organized by College of Engineering, Pandharpur.
  14.  A paper entitled, “Effective implementation of stream ciphers on 8 bit AVR microcontrollers”, National  conference NCECA-08 organized by College of Engineering,Pandharpur.
  15. A paper entitled, “An Effective steam utilization by using condensate recovery meter”, ia presented in a National conference ACES-09 organized by Jawaharlal Nehru Engineering College Aurangabad.
  16. A paper entitled, “An electronic/electrical Analyzer for I-V characteristics of switching devices”, is  presented in a National conference “TECHNOEVOLUTION-2K9’ organized by Dept.of Electronics and  Telecommunication of Amrutvahini College of Engineering ,Sangamner. 29th Jan.2009.
  17. A paper entitled, “Implementing Image processing algorithm on FPGAs”,is presented National conference on “Futuristic Computer Applications” organized by AISSMS Institute of Information Technology, Pune.
  18. A paper entitled, “Zigb ee Protocol based home automation wireless sensor network”, is presented in a National conference “NCOAT-NIRMITI-2010” organised by Priyadarshini Institute of Engineering and Technology,Nagpur. 9th and 10th Feb.2010.
  19. A paper entitled, “Controller area network data for car communication,” is presented in a National  conference organized by J.T.Mahajan college of Engineering, Faizpur.     

International (In India):-04

  1. A paper on “Design of micro controlled based milk analysis and billing system using smart card” is presented in an International conference on Advances in Manufacturing and Technology Management at Parshvanath College of Engineering ,Thane, during 18th to 20th Jan 2007.
  2. A paper entitled, “A microcontroller based multi sensors data fusion and artificial intelligent technique for gas identification”, is presented in a International conference “ICEOC-2010”on Energy Optimization  & Control by Govt. Engineering College, Aurangabad.
  3. A paper entitled, “Closed Loop Multiple Output UPS with Quasi Resonant Push Pull”, is presented in an International conference organized by S.E.S. College of Engineering, Navalnagar.
  4.  A paper entitled, “Tracking and positioning of mobile system in Telecommunication network using TOA method”, is presented in a International conference organized by S.E.S. College of Engineering, Navalnagar.

International (Abroad):- Nil

Dr Vijayashree A. More


Publications in Peer Reviewed National & International Journals

Details of Publication
National : NIL

International:- 16

Year 2016

Sr.No

Topic

Journal

Date

1

Design for human activity recognisation using accelerometer and pressure sensors

IJTRD
International journal of trend in research and development

Volume3 Issue 2,ISSN:2394-9333
Mar-Apr 2016

Year 2015

Sr.No

Topic

Journal

Date

1.

Embedded Ethernet microcontroller prototype for different parameter monitoring and control

IJAR
Indian journal of applied research

Volume 5  issue 7, ISSN:2249-555x
July 2015

2.

Minutia based touchless fingerprint recognition

IJARECE
International journal of Advanced research in electronics and communication engineering

Volume 4  issue 4, ISSN:2278-909x
April 2015

Year 2014

Sr.No

Topic

Journal

Date

1

An approach to touchless fingerprint recognition using matlab

IJETTCS
International journal of emerging trends and technology in computer science

Volume 3 issue 4, ISSN:2278-6856
July- august 2014

2

Authentication of digital image by the use of fragile watermarking

IJETTCS
International journal of emerging trends and technology in computer science

Volume 3 issue 4, ISSN:2278-6856
July- august 2014

Year 2013


Sr.No

Topic

Journal

Date

1

Face Recognition System Using Gaborjet ICA

IJERIA
International Journal of Engineering Research and Industrial Applications

Volume-6,No-II,May-2013,pp 43-48.

2

Face Recognition based on various Wavelet

IJITS
International Journal of Information Technology and systems

volume 1,No-2, (Jan-June 2013) , pp-79-82.

 

 

Year 2012

Sr.No

Topic

Journal

Date

1

Embedded approach for JPEG encoder using ARM

IJ-ETA-ETS
International  Journal Emerging technology applications  in Engg, Technology and Sciences

Volume 5 issue 1, ISSN:0974-3588
Jan- June 2012

2.

Optimization of power control embedded system for efficient power utilization.

IJ-ETA-ETS
International  Journal Emerging technology applications  in Engg, Technology and Sciences

Volume-5/ ISSUE 2 /
July 12- Dec12

3.

Green house monitoring based on zigbee

IJCET
International journal of computer engineering and technology

Volume 3 issue 3, ISSN:0976-6375
Oct- Dec  2012

4.

Real time cost effective temperature controller

IJECET
International journal of electronics and communication engineering and technology

Volume 3 issue 2,
July- September  2012

5.

Wireless sensor network for in field operation monitoring of induction motors

IJECET
International journal of electronics and communication engineering and technology

Volume 3 issue 2, ISSN:0976-6472
July- September  2012

6.

platform independent JPEG encoder

IJCA
International journal of computer applications

Volume 45 issue 11, ISSN:0975-8887
MAY 2012

7

IRIS Recognition system using ICA, PCA, Daugman’s Rubber sheet model together

IJCETEE

Volume 2/ Issue1
ISSN 2249-6343
 April 2012

8

Wireless Control & monitoring of Robotic ARM (SWORDS

IJCETEE

Volume 2/ Issue1
ISSN 2249-6343
 June 2012

9

Improved  fisher face approach for human recognition system using facial biometrics

IJICTR
International Journal of Information and Communication Technology Research

Volume 2,Issue 2, February 2012, pp-135-139,.

 

 

Dr S. A. Naveed


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
1. Syed A.Naveed, J.Amarnath, G.TulasiRam Das and B.P.Singh, “Switching in over voltages due to vacuum circuit breaker in high voltage induction motor”, Indian Journal of Power and River Valley Development (IJPRVD), ISSN: 0019-5537, Mar-Apr 2007, PP 108-111, Index: Libraries Australia.
…                                                   
International:-
1. Syed A.Naveed, J.Amarnath, G.TulasiRamDas and B.P.Singh, “Suppression of over voltages in high
    voltage induction motor,” International Journal of Applied Engineering Research, (IJAER), Print
    ISSN 0973-4562, Vol.2 No.3 (2007), PP 519-534, Index: Scopus.
2. M.Moazzam Moinuddin, Syed A.Naveed, et al, “Multiple target detection of high resolution Doppler radar”, International journal of Engineering and Technology (IJET), ISSN: 1793-8236, Vol.3. No.5, Oct 2011, PP 497-504, Index: Google Scholar, DOAJ, IET Inspec.
3. Hemlata B. Nirmal and Syed A. Naveed, “Microcontroller based automatic solar power tracking
    System”, International Journal of Electrical Engineering and Technology (IJEET), ISSN 0976 –
    6545(Print), ISSN 0976 – 6553(Online), Volume 4, Issue 1, January- February (2013), pp. 109-114,
    © IAEME: www.iaeme.com/ijeet.asp, Impact Factor (2012): 3.2031 (Calculated by GISI), Index:
    Thomson Reuters, Google Scholar.
4. Jogdand.V.L. and S. A. Naveed, "Design and implement of tire monitoring system based on
    zigbee", International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622,
    www.ijera.com, Vol. 2, Issue 3, May-Jun 2012, PP 527-529. Impact Factor: 0.56 (2012). Index:
    Google Scholar, DOAJ, Index Copernicus.
5. V. L. Jogdand, S. A. Naveed and A. M. Maske, "Design and Implement of Wireless Tire Pressure
      Monitoring System", International Journal of Electronics & Communication Technology (IJECT),
      Vol. 3, Issue 4, Oct - Dec 2012, ISSN : 2230-7109 (Online) | ISSN: 2230-9543 (Print),
      www.iject.org PP 256-258. Impact Factor: 5.09 (2012), Index: Google Scholar, Index Copernicus.
6. Chaitali A. Muley, S. A. Naveed and Shweta M. Shingare,"Design Aspects of RF Switch",
      International Journal of Electrical and Electronics Engineering Research (IJEEER), ISSN 2250-
      155X, Vol. 3, Issue 1, Mar 2013, PP 135-140, © TJPRC Pvt. Ltd, Impact Factor(JCC): 5.63, Index:
      Google Scholar.
7. Shweta M. Shingare and Syed A. Naveed," A Review paper on MEMS cantilever radio frequency
      switch", International Journal of Computer Networking, Wireless and Mobile Communications
      (IJCNWMC), ISSN 2250-1568, Vol. 3, Issue 2, Jun 2013, PP 29-34, Impact Factor(JCC): 5.27,
      Index: Index Copernicus.
8. Shweta M. Shingare, S. A. Naveed and Chaitali A. Muley, "Aspects of double mass on tuning fork
      MEMS gyroscope", International Journal of Electronics, Communication & Instrumentation
      Engineering Research and Development (IJECIERD), ISSN 2249-684X, Vol. 3, Issue 2, Jun 2013,
      PP 189-194, Impact Factor(JCC): 4.72, Index: Index Copernicus.
9. Priyanka Rodge and S. A. Naveed, "Driver Adaptive Active Safety Systems Development: A
      Literature Survey", International Journal of Science and Engineering (IJSE), ISSN:2347-2200,
      Volume 1, Number 2 - 2013, PP 109-116, www.ijse.org., Global Impact Factor: 0.4, Index:
      Google Scholar
10. Priyanka Rodge and S. A. Naveed, "Active Safety Systems Design Using Arm11", International
      Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering
      (IJAREEIE), ISSN (Print) : 2320 – 3765, ISSN (Online): 2278 – 887, www.ijareeie.com,  Vol. 3, 
      Issue 3, March 2014, PP 7938-7945, Impact Factor: 1.68, Index: Google Scholar, DOAJ, IC.  
11. Sumit S. Chincholkar and S. A. Naveed, " Fault Detection and Classification in Transmission Line
      Using FPGA", International Journal of Science and Research (IJSR), ISSN (Online): 2319-7064,
      www.ijsr.net, Volume 3 Issue 11, November 2014, PP 312-318, Impact Factor (2012): 3.358.
      Index: Google Scholar, Index Copernicus.   
12. Vinay Y. Somwanshi and S. A. Naveed, " Simulation and design of solar input EZ-source inverter
      system ", International Research Journal of Engineering and Technology (IRJET), e-ISSN (Online):
      2395-0056, p-ISSN: 2395-0072, www.irjet.net, Volume 02 Issue 06, Sep-2015, PP 583-588,
      Impact Factor (2014): 2.518, Index: Google Scholar, Thomson Reuters, Index Copernicus.  
13. Rohit Chachda and Syed Naveed, " Closed loop controlled PFC boost converter with constant
      output voltage and EMI filter ", International Research Journal of Engineering and Technology
      (IRJET), e-ISSN (Online): 2395-0056, p-ISSN: 2395-0072, www.irjet.net, Volume 02 Issue 08,
      Nov-2015, PP 934-937, Impact Factor (2014): 2.518, Index: Google Scholar, Thomson Reuters,
      Index Copernicus.
14. G R M Rao and S A Naveed, "Design of close loop control for hydraulic system", International
      Research Journal of Engineering and Technology (IRJET), e-ISSN (Online):2395-0056, p-ISSN:
      2395-0072, www.irjet.net, Volume 03 Issue 08, Aug-2016, PP 1-5, Impact Factor (2016): 4.45,
      ISO 9001:2008 Certified, Index: Google Scholar, Thomson Reuters.

Paper presented at National & International Conferences

Details of Publication
National:-
1. Syed A.Naveed, Venu Gopal, J.Amarnath and B.P.Singh, “Fast Transients in the operation of an
    induction Motor with vacuum switch”,13th National Power System Conference, (NPSC 2004), 27th-
    30th Dec 2004, IIT Madras, Chennai, INDIA, Vol-II, PP 630-634.
2. Nirmal Hemlata and Syed A.Naveed, “Solar Tracking Systems: A Review”, International Conference
    on Information, Knowledge and Research in Engineering, Technology and Sciences (ICIKR-ETS-
    2012), ISBN: 978-81-906220-3-5, 24-25 March, Rajkot, INDIA, PP 241-244.
 3. Yogita V. Bhagwat and Syed A. Naveed, “Design of Three phase preventor and selector system using microcontroller 89S52”, 4th National Conference on Electronic Technologies 12th and 13th April 2013, Dept of ETC, Goa College of Engineering, Farmagudi (Govt. of Goa).

International (In India):-
1. Rohit B. Chachda and Syed A. Naveed2, " Simulation and design of PFC boost converter with
      constant output voltage and EMI filter ", International Conference on Information Engineering,
      Management and Security (ICIEMS), 13-14 August 2015, ISBN 978-81-929742-7-9, Vol 01,
      www.iciems.in, IIT Madras-Research Park, Chennai, India, PP 302-306.
2. Vinay Y. Somwanshi and Syed A. Naveed, " Simulation and Design of Solar Feed EZ-Source
      Inverter", International Conference on Information Engineering, Management and Security
      (ICIEMS), 13-14 August 2015, ISBN 978-81-929742-7-9, Vol 01, www.iciems.in, IIT Madras-
      -Research Park, Chennai, India, PP 307-311.
3. U V Kulkarni, A P Phatale and S A Naveed, "A Review Paper Latest Trends In Distributed Smart
      Grid Technology", International Conference on Information Engineering, Management and
     Security (ICIEMS), 13-14 August 2015, ISBN 978-81-929742-7-9, Vol 01, www.iciems.in, IIT
    Madras-Research Park, Chennai, India, PP 328-333.
4. GRM Rao, J K Janshali and Dr.S.A.Naveed, "Design of motion control for heavy duty hydraulic
      system-Model based approach", Symposium on International Automative Technology 2017
      (17SIAT-0051), 08-08-016, 18-21 Jan 2017, ARAI campus, Pune, India, PP 1-10.


International (Abroad):-
1. Syed A.Naveed, Venu Gopal, J.Amarnath and B.P.Singh, “Reduction of switching Transients by
    using surge Arrestors in the operation of Induction Motor Drives”, XIV International Symposium on High Voltage Engineering, (ISHVE 2005), 25th-29th Aug 2005, Tsinghua University, Beijing,
    CHINA, B-50.
2. Venu Gopal, S.A.Naveed, J.Amarnath, Kamakshaiah.S and B.P.Singh, “Reduction of switching
    Transients in the operation of Induction Motor Drives”, International Symposium on Electrets,
    (IEEE ISE-12), 11th-14th Sept. 2005, Salvador, BRAZIL, PP 388-391.
3. Syed A.Naveed, J.Amarnath, S.Kamakshaiah and B.P.Singh, “The features of High Voltage Motor
    Interruption by vacuum circuit breaker with different cable Lengths”, International Conference on Electrical Insulation and Dielectric Phenomena, (IEEE CEIDP) 15th – 9th Oct 2005, Oak Ridge,
    Tennessee, U.S.A.
4. Syed A.Naveed, J.Amarnath, G.Tulasi Ram Das and B.P.Singh, “Generation and measurement of
    switching Transients in large Induction Motor Drives”, International Conference on condition
    monitoring and diagnosis, (IEEE CMD), 2nd-5th April 2006, Changwon, KOREA, PP 99.
5. Prem kumar, J.Amarnath, Syed A.Naveed, B.P.Singh, “Wavelet Transform Techniques for the
    detection of Winding Faults in a Power Transformer”, International Conference on condition
    monitoring and diagnosis, (IEEE CMD), 2nd-5th  April 2006, Changwon, KOREA, PP 109-110.
6. Syed A.Naveed and J.Amarnath, “Reduction of switching transients in gas insulated Substation”,
    International Conference on High voltage Engineering and Application (IEEE ICHVEA), 9th-13th
     November 2008, Chongqing, CHINA, PP 45-48.

Ms Vishwashree Kulkarni


Publications in Peer Reviewed National & International Journals

Details of Publication * Attached as a separate word document
National:-  nil
International:-13

  1. A Versatile Microcontroller Based Semiconductor Device Tester
  2. Advanced Robotic Weeding System
  3. Real Time Damage Detection System for Structural Health Monitoring of Buildings
  4. Design Of Milk Analysis Embedded System For Dairy Farmers
  5. En - LEACH Routing Protocol For Wireless Sensor Network
  6. Implementation of AES Based on Rolled Architecture Using T-Box
  7. Biomedical Application Using Zigbee
  8. FPGA based Design & evaluation of Wireless Sensor n/w for Mine Safety
  9. Automatic Multichannel  Drip Irrigation
  10. Intelligent Controller To Monitor And Control Green House Physical Parameters using Higher Sensor N/W
  11. Automatic Multi channel Drip irrigation-a study
  12. En-leach Routing Protocol for Wireless Sensor n/w
  13. Automatic leak detection & numbering system for automobile Industry

Paper presented at National & International Conferences

Details of Publication *Attached as a separate word document
National:-2

  1. Embedded system-Milkotester an application
  2. Intelligent Controller To Monitor And Control Green House Physical Parameters using Zigbee

International (In India):-9

  1. Advanced robotic weeding system-a study
  2. Advanced robotic weeding system
  3. Design of Milk Analysis Embedded system for dairy farming
  4. Enhanced LEACH routing protocol for wireless sensor n/w
  5. Design of Enhanced LEACH routing protocol for wireless sensor n/w
  6. Automatic leak detection & numbering system for automobile Industry
  7. FPGA based design & evolution of wireless sensor n/w for  mine safety.
  8. Study of Automatic Drip irrigation
  9. Automatic leak detection & numbering system for automobile Industry

 

International (Abroad):- Nil

 

Ms S. D. Gavraskar


Publications in Peer Reviewed National & International Journals

-

Paper presented at National & International Conferences

International:- Review Paper
in IEEE SCOPES -2016 International
Conference on Digital Signal Processing ,Communication ,Power and Embedded Systems  during 2 nd – 5 th , Oct 2016 at Paralkhemundi Orrisa ,Centurion University of Technology and Management, INDIA.

 

Ms. C.S. Khandelwal


Publications in Peer Reviewed National & International Journals

Details of Publication
National:-
Nil
International:-
1.Architecture of Wireless Robot Based On Gesture Recognition, International Journal of Computational Intelligence and Information Security.Jan2012.
2.An Integrated Color and Hand Gesture Recognition for wireless Robot, International Journal of Advances in Engineering and Technology. March 2012.
3.Nondiagonal Estimation Techniques for Noise Reduction in Audio Signal .IJCA, 2012.
4.Classification of ECG Abnomalities using ANN, International Journal of Engineering Research and Techonology, Vol.I (02)2012.
5.Efficient Dynamic System Implemenatation of FPGA based PID Control Algorithm for Temperature Control, International Journal of Electrical Engineering and Technology, july-sept 2012.
6.RFID based sensor prototype for wireless industrial automation, IJCA, 2012.
7.Efficient Implementation of FPGA based PID control Algorithm for Temperature control system, sensor & TransducersVOL.145, Issue 10, October 2012.
8.Implementation of Patient monitoring system using GSM Technology, International Journal of Electronics and Communication Engineering & Technology (IJECET), Volume 4, Issue 1, January- February (2013),
9. Review paper on Applications of Principal Component Analysis in Multimodal Biometrics system
Elsevier,"Procidia of computer"July 2016.

Paper presented at National & International Conferences

Details of Publication
National:-
1. Digital Signal Processing with Programmable Gate Arrays using Number Theoretic Transforms, 25th, 26th Feb 2005.
2.Roll of Industry in Curriculum Development and Implementation, 23rd, 24th March 2005.
3. Highly Sectorized System for Internet Wireless Access, 16th, 17th March 2007.
4.Frequency Domain Constant Modulus Algorithm for Broadband Wireless System, March 2007.
5.Autonomous Search Vehicle with Wireless Video Camera, TALENT 2007.
6.Humanistic computing, 15th Sep 2008.
7.GSM Based Water Tank Controller, 8th, 9th Jan 2009.
8.Graffiti recognition & control system 29th Jan 2009.
9.Iris Recognition using Mat Lab,2009
10.Finger print  Verification  system by extracting enhancing  the core Area in fingerprint Images.19th ,20th Feb 2010
11. Finger print verification based on principal Gobar  filter 7th march 2010.
12.An Efficient Noise Reduction by using Non-Diagonal Estimation Techniquies,16th ,17th Dec.2011
13.Hand Gesture Recognition Controlled Robot.20-21 Jan2012.
14.Noise reduction by using thresholding and Non-Diagonal Estimation Techniquies, 2012.
15.GSM Based patient monitoring system .2nd march2012.
16.An integrated color and hand gesture recognition control for wireless robot, 2012.
17.An Architechure of Gesture recognition based wireless robot, 23-25th Feb 2012
18.GSM based patient monitoring system A National Conference E-NSPIRE-2K13,   LONI, 2013
19. An energy efficient street lighting system based on solar & LED’s.NCMOC, VIT Pune March 2015
International (In India):-
1. A low cost DSP Based ,Intelligent Vision System for Robotic Applications.24th ,25th 7March200 7
2. Steganography Techniques for digital image in corporating Hidden Bits, 2007.
3. A Robust Analog VLSI Motion Sensor Based on the Visual System of the fly, 2007.
4. Diagnosis of Electrocardiogram by wavelet transform and ANN, 1-2nd April2010.
5. Embedded system based mobile patient monitoring device.2010.
6. Recent Trends in Engineering & Technology ICRTET’2013, Chandwad.
7. DSPIC based low cost & efficient digitized feedback for DC-DC Converter, EEPCECT-201
8. Design & development of Theft control system, IFERP, Pune JAN-2015
9. Real time vehicle tracking system, ICRTIET, Ongole May 2015.
10.Iris and Finger print Recognition using PCA for Multi modal Biometric system, International    Conference on Global Trends in Engineering Technology and Management, 4 Jan -6Jan2016, College of Engineering & technology ,Bambhori, Jalgaon.
11. Design and Development of Vehicle Tracking and Theft Control System, International Conference on Electronics and Communication Systems, 25th-26th Feb 2016, Karpagam College of Engineering Coimbatore, Tamilnadu.
12. Review paper on Applications of Principal Component Analysis in Multimodal Biometrics system. International  Conference on Intelligent Computing ,Communication & Convergence,24th-25th Jan 2016,IIMT,Bhubaneswar,Odisha.

 

 

Ms. A. P. Phatale


No.

Name of Paper                  

Date

Name of Journal

1

Microcontroller based Photovoltaic battery charging system with buck converter

1st Jan.2012

International Journal Electrical Engg. & Technology.

2

Current linearity improvement in buck converter for a photovoltaic battery charging system

June 2012

International journal of emerging technologies & application in Engg. Tech.& science

3

Automatic grading system based on Machine vision

4 July 2013

International journal of Innovative research in Electrical, Electronics, Instrumentation & control Engineering vol-1

4

RFID Based automated guided vehicle system for transportation

4th July 2013

International journal of Electrical Engineering  & Technology

5

Design GPS based virtual eye for the blind

3 June 2014

International Journal on current Engineering and Technology

6

Automatic saline level monitoring system using microcontroller ATMEGA 328

2015

International journal of electrical, electronics and computer systems[IJEECS]

7

Automatic and Low cost saline level monitoring system using wireless Bluetooth module and cc2500 transreceiver

9 Sep 2015

International journal of research in engineering and technology[IJRET]

8

A effective way to modify video for deleting forground object from background using exemplar based inpainting method

5 march 2016

International journal of engineering sciences and research technology [IJESRT]

9

Study on intelligent automatic vehicle accident preventation and detection system

5 May 2016

International journal of advance research in electrical, electronics and instrumentation engineering

Papers presented in Conferences:


No.

Name of Paper                   

Date

Name of Conference

1

Automatic grading system based on Machine vision

28-29 June 2013

International conference on Network infrastructure management system

2

Indoor & outdoor Navigation  system for blind people

5-6 April 2014

1st  International Conference on Electronics & telecommunication, Electrical and Computer Engineering

3

Automatic saline level monitoring system using microcontroller ATMEGA 328

 

24 may 2015

International conference on electrical, electronics and computer science engineering [IJEECSE-2015]

4

Distributed smart grid implementation for biomedical applications

12 april 2015 published in journal

International conference on recent innovations in engineering , science and technology[ICRIEST]

5

A Review Paper On Latest Trends In Distributed Smart Grid Technology

2015

 International Conference on Information Engineering, Management and Security
2015 [ICIEMS 2015]

6

A comparative study of effective way to modify moving object in video using different inpainting methods

9-11 jan 2016

International conference on challenges & opportunities in technical education in the era of sustainable development

7

Implementation of intelligent automatic vehicle accident preventation and detection system

5 june 2016 published in journal

International conference on electrical, electronics, computer science, MATHEMATICS, PHYSICAL EDUCATION AND MANAGEMENT [ICEECMPE

8

Automatic grading system based on Machine vision

1-2 FEB.2013

Natioanl  level Technical symposium “ TECHNOFEST-2013”

9

RFID Based automated guided vehicle system for transportation

28 & 29 SEPT. 2013

National conference on Growth of Technologies in Electronics, Computer and telecom.(GTECT-2013)

10

Development of GPS based Virtual Eye for Visually impaired persons

21-22 March 2014

National Conference on Advances in Engineering Technology and applied science

11

Navigation  system for blind people using GPS

6-7 June 2014

National Conference on Geo-informatics in Real,Urban,& climatic studies

12

Low cost automatic saline level monitoring system using uc Attiny 2313

4-6 march 2015

National conference on modeling, optimization and control [NCMOC-2015]

Ms Aarati R. Salunke


Publications in Peer Reviewed National & International Journals

Details of Publication
National:- Nil

International:-

  1.  “Home Automation using Android Application & Bluetooth” International Journal on Recent Trends in Computing and communication, IJRITCC Feb. 2015, Vol:3 Issue:2, ISSN:2321-8169, pp. 815-819
  2. “Multifunctional Smart Display Using Raspberry-Pi” International Journal of Advance Foundation and Research in Computer, IJFRC Jan 2014, Volume 1, Issue 1, ISSN : 2348-4853.
  3. “Wireless Notification System” International Journal of Multidisciplinary Educational Research, IJMER March 2014, Volume 3, Issue 3(12), ISSN : 2277-7881, pp 43-45
  4. “Unstructured Communication Architecture for Next Generation Voice and Data Services in Mobile Communications” 6,7 March 2012, In International Journal of Advances in Management, Technology & Engineering Sciences, Vol.I, Issue 6(IV), March 2012, page no.115-117.(ISSN: 2249-7455) 

Paper presented at National & International Conferences

Details of Publication
National:-

  1. IEEE Conference ICECCT 5th March to 7th March 2015, Coimbatore  “Review of Unstructured Architecture for voice and Data services in mobile communication”
  1.  ICCC-2016  24th to 25th Jan 2016 Bhubneswar, Orissa “Development of Unstructured Architecture for voice and Data services in mobile communication”

 

  1. ”Digital Notice board using GSM & Wi-Fi” In International Conference on Electronics and Telecommunication, Electrical and Computer Engineering, 5,6 April 2014, Sinhgad Institutes, Pune, India.
  1. “Smart Home System using GSM and Power Line Communication” International Conference on Electrical & Electronics Engineering, 10th March 2013, Hyderabad.

 

  1. “Digital Notification System using Wi-Fi” National Conference on Advances in Engineering, Technology and Applied Sciences, 21,22 March 2014, Yashwantrao Chavan College of Engineering
  2. ”Sustainable Development” 24-26 September 2010, In national Conference for women WE-MEET, COEP,Pune, MH, India
  1. “Highly Sectorized System for Internet Wireless Access”, 16-17 March 2007, In the proceedings of National conference on Broadband Communications, Bhilai Institute of Technology, Durg India.

 

  1. “Hidden bits: Techniques for Digital watermarking”, 1,2 October 2006, In the proceedings of National conference on Emerging Techonology & applications (ETA-2006), Saurashtra University,Rajkot, India.

 

  1. “Transient Data Recording System for Load Behavior Analysis” In the proceedings of National conference organized by Govt. College of Engineering, Aurangabad.

 

  1.  “Home Automation Using Bluetooth and Mobile Phone”, March 2007, In the  proceedings of International conference on  Recent advancements and Application of Computer in Electrical Engineering (RACE-2007), Engineering college Bikanar, Rajasthan, India.

International (Abroad):- NIL
1.
2.