MGM University        
×

Electronics and Computer Engineering

Undergraduate Program (B.Tech.)
Intake: 60

Vision

  • To develop GREAT technocrats and to establish centre of excellence in the field of Electronics and Telecommunications Engineering.
    • Global technocrats with human values
    • Research and lifelong learning attitude,
    • Excellent ability to tackle challenges
    • Awareness of the needs of society
    • Technical expertise

Mission

  • To provide good technical education and enhance technical competency by providing good infrastructure, resources, effective teaching learning process and competent, caring and committed faculty.
  • To provide various platforms to students for cultivating professional attitude and ethical values.
  • Creating a strong foundation among students which will enable them to pursue their career choice.

Program Educational Objectives (PEOs)

  • Graduates will be prepared
    • To cultivate the skills & attitude required to pursue career choices in Electronics and Telecomminication Engineering, allied fields and be able to contribute to the advancement of knowledge.
    • For deep insight in Electronics and Telecomminication Engineering concepts, mathematical, scientific and multidisciplinary engineering fundamentals required to solve engineering problems and pursue higher studies.
    • With good scientific and engineering knowledge in the field of Electronics and Telecomminication Engineering so as to comprehend, analyze, design and develop products and solutions for the real life problems.
    • To exhibit professional attitude, effective communication skills, leadership roles, project management and an ability to relate engineering issues to broader social context
    • To continue professional and personal development with awareness of excellence and the life-long learning.

HOD's Message

Electronics and Computer Engineering is the largest and also the fastest growing field of engineering. The department was established in 1983 and is one of the oldest departments of MGMU. The majority of our alumni have acquired top positions in all walks of life.

The department offers an undergraduate program B.Tech. in Electronics and Computer Engineering and a postgraduate program M.Tech. in VLSI and Embedded Systems. The department also has a Ph.D. Research Centre. The research facilities are supported by the advanced facilities available in the department. The department has an endless commitment and perseverance towards our students to impart up-to-date technical knowledge and cutting-edge technologies in this field.

Electronics and Telecommunication Engineering department strives hard to enhance the technical competence of our students by providing excellent infrastructure, abundant resources, innovative teaching-learning processes and highly qualified and experienced faculty.

MGMU’s Jawaharlal Nehru Engineering College has an exciting time ahead as our country is facing great scientific and technical challenges and the solution to many of which will be found by Electronics and Computer Engineers and it can be by you!

I invite you to join us in this mission, as we all together can improve our lives and build the world.

Dr. Sunil N. Pawar

Associate Professor and Head

hodect@jnec.ac.in

Program Outline

In the last three decades, drastic changes have taken place in the field of Electronics and Computer Engineering. These changes have revolutionized the life of masses.

Electronics Technology has entered in all the walks of life. This technology finds its applications in Consumer, Industrial, Civil, Military, Medical and in many more fields. Today, in many fields, we can’t imagine Automation without the use of Electronics.

The Department of Electronics and Telecommunications has designed a unique program of B.Tech.(ECE) approved by All India Council for Technical Education(AICTE), New Delhi. that not only develops the Industry needed expertise in the chosen domain but also helps to acquire a professional attitude, effective communication skills, leadership qualities, management skills and an ability to use engineering expertise for solving social issues using Gandhian philosophy.

Key Features

  • Department offers Minors and Honours Degree in Advance fields of Electronics and Computer Engineering. It will help students for developing specialized skills in Electronics and Computer Engineering along with B.Tech Program. Students may opt for Minors offered by other departments in the university.

  • Department offers following Minors and Honours Degree:

    • Minor Programs
      1. Internet of Things(IoT)
      2. Industry 4.0
      3. Electronics Engineering
    • Honours Degree
      1. VLSI and Embedded Systems Design
      2. Artificial Intelligence and Machine Learning
      3. Data Science
  • Full-fledged and well-equipped laboratories

  • Vibrant IEEE students’ chapter

  • Teacher-guardian scheme is effectively implemented

  • Placements in national and multi-national companies

  • Students are motivated to take-up Industry sponsored projects, GIZ projects and interdisciplinary projects

  • Innovation Incubation and Research Centre (IIRC) equipped with advanced technological platform. It has following facilities –

    1. Industrial mechatronics Lab (Christiani Sharpline Technical Training Pvt.Ltd., Germany)
    2. Industrial automation Lab (Siemens, Germany)
    3. Industrial robotics Lab (TAL, India and YASKAWA, Japan)
    4. Autonomous vehicle Lab ( Driverless Car-ADAS, USA)
    5. Electric vehicle Lab (CSTT, Germany)
    6. Advanced drone Lab
    7. Flow measurement Lab (Endress+Hauser, Germany)


Career Opportunities

Electronics and Computer engineering is one of the comprehensive disciplines among all engineering disciplines. It offers platform for a great deal of interdisciplinary wok. Electronics and Computer engineers apply knowledge and skills of circuit design, programming and prototyping to continuously build new products. An electronics and computer engineer can find a variety of career options and can work as the following designations:

  • Automation Engineer
  • Embedded Systems Architect
  • Software/IT Analyst
  • Solutions Architect– Cloud Computing
  • Telecom Network Design & Planning Engineer
  • Telecom Architect
  • Technical Director
  • Electronics Design, Research and Development Engineer
  • Control Systems Engineer
  • IC Design Engineer
  • SoC Power Analyst
  • Electronics & Communication Consultant
  • Entrepreneurship
  • Researcher

Program Structure

Major Recruiters

Infrastructure

Activities

Smart City Aurangabad Open Data Week

Aurangabad Smart City Development Corporation Limited celebrated Open Data Week during 31st January to 7th February 2022. Prof. Ms. Pratibha Patil of ECT Dept. JNEC has participated and shared her views on “Role of Electronics and computer technology in the Smart city”.

Shishottayam Puraskar

Mr. Mukul Diwanji, student of BE (ECT) received "Shishottayam Puraskar" for year 2020-21. The award is given to those who mark excellence in studies alongwith the participation in various activities and giving an exhibit of human values. JNEC alumni association announces this award as a recognition & motivation, Mrs. Shashikala Pratap Borade supports and incourages to foster values education anticipated to former principal & trustee Hon.Sh. Pratap Borade .

This award is a token of approval and gratitude towards good conduct, it makes students aware that good work will be rewarded in qualities like effort, improvement, cooperation and self-confidence too.

"I feel privileged on been conferred with this prestigious Shishyottam Puraskar. I am grateful to the JNEC Alumni Association and ECT department for finding me eligible for this honour. As everyone knows the journey of engineering is not easy but it was made seamless to me and many other students like me because of the constant motivation and support from all the faculty members of the department.”
                     Mr. Mukul Diwanji (Batch 2021)

Proud Moments for the Department

An appreciation and encouragement received by Hon. Chancellor, MGMU Sh. A. N. Kadam, Hon. Vice Chancellor Dr. Vilas Sapkal, Hon. Registrar Dr. Ashish Gadekar,Mrs. Anuradha Kadam, Dr. Pravin Suryavanshi ,to the enthusiastic and sensible Lady faculty members of Electronics and Telecommunication Engineering Department in MGM foundation day faculty gathering, ABHIVYAKTI

A participation of Lady faculty members of Electronics and Telecommunication Engineering Department in MGM foundation day faculty gathering, ABHIVYAKTI , on 18 Dec. 2021, a cultural program , musical drama on “COVID-19” precautions and how it affected everyone’s life.

Not only teaching, but........

Lady faculties of Electronics and Telecommunication Engineering tried hands on Maxican Cusine in a workshop on 12th march 2022, organized by “Sakshama” , women’s day special, at Institute of Hotel Management, MGMU Aurangabad.

Firodiya Karandak 2020

Firodiya Karandak 2020 is an intercollegiate Multi art competition held at Pune on February 3, 2020. Dhanashri Kulkarni, Sourabh Rangnekar, Kalyani Ekabote, Pranav Maid, Aniket Ballal, Shivam Karle, Gauri Joshi, Aniruddha Kingaokar students from Third year ECT participated. Department HOD and faculty appreciatie the students dedicated efforts and Congratulations to the entire team!

Lecture talk on Electric Vehicles

Mr.R.P..Deshpande interacted with third year students on the topic ‘Electric Vehicles’ on February 4, 2020. With over 45 years in the industry, Mr. R. P. Deshpande is among the most experienced and respected specialists in Indian capacitor sector. Some of the capacitor brands nurtured by him continue to retain their market-pole position. Throughout his career, Mr. Deshpande has pioneered the development of many capacitor products, technologies, processes and related applications. He speaks on various challenges like cost, batteries of electric cars.

Webinar on VLSI

Electronics and Computer Engineering department has arranged a webinar which was conducted by Dr.Noor Mohamad Sk on “VLSI Digital System design through verilog HDL” in the benefit of Third year and final year electronics students. The session is held on 21st Feb- 3 rd March 2020. It was a really splendid presentation which exposed students to the VLSI fundamentals and applications. All students appreciated and benefited from his knowledge.

Dr. Noor Mahammad S has received his M. Tech from National Institute of Electronics and Information Technology, Aurangabad, PhD from Indian Institute of Technology Madras, currently working as a Assistant Professor in the department of Computer Science and Engineering, Indian Institute of Information Technology Design and Manufacturing (IIITDM) Kancheepuram, Chennai. His research interests are High Performance VLSI Architectures for Packet Processing, Reconfigurable Computing, and Evolvable Hardware. From ECT department these faculties were involved Ms.S.D.Gavaskar, Ms.C.S.Khandelwal, Ms.A.R.Salunke, Ms.S.D.Giri, Ms.P.B.Murmude and Ms.P.P.Patil and 20 students have participated and done hands on Open source Verilog software.

Parivartan Puraskar

Mr. Sandeep Kale student of BE (ECT) department received "Parivartan Puraskar" and Mr. Abhijeet Shinde student of BE (ECT)department received "Shishya Uttam Puraskar" by JNEC alumni association and in recognition of motivation and values Imbibed Prof.Pratap Borade Sir, for the academic year 2019-20 . This award shows approval and gratitude for each person's good job, and it makes students aware that good work will be rewarded. also shows students qualities like effort, improvement, and cooperation as well, can increase self-confidence.

Mr. Abhijeet Shinde said “ I am extremely honoured to be receiving such an important award and earnestly grateful for the recognition for my work. I have faced several challenges my way here, winning this award would not have been possible without the inspiration of my teachers and mentors. I thank my teachers, HOD and entire authorities of JNEC for always being supportive in curricular and extracurricular helping me to reach my goal.

Introduction of Optical Pen Mouse

The optical pen mouse is a usable and handy input device to interact with computers for writing as well as freehand drawing purposes. It can also be used to write precisely on a paint application with perfect control. This device indeed gives a comfortable experience to the user. The traditional mouse can be used only for specified purposes viz. clicking, dragging, scrolling, etc. but it becomes difficult to draw an object on applications like Microsoft Paint and Microsoft Whiteboard. This disadvantage of traditional mouse i.e. the inability to draw is overcome by the optical pen mouse created by me. This device is a boon for Professors as it helps them immensely during their online lecture sessions. This optical pen mouse is a 'plug and play' type of device that can be connected to a laptop or a PC via the standard USB port, without the need of a device driver or an extra requirement. The main circuit of this device is the mouse circuit only and the software that comes within the operating system package.
-- by T. A. Mohije

SY ECT Student Kartik Doghole’s Creativity

Kartik Dighule, a creative student of JNEC College. The nine-day lockdown was much tougher than all previous lockdowns. So the students in school and college were literally annoyed by staying at home. Besides, the young man, who was tired of watching TV for three and a half months and playing games on his mobile, found a different option this time. Kartik Dighule, a student of JNEC College, is one of them. His hobby of designing cars became my hobby during this time. Completed the new model by modifying the existing vehicles.

Best Paper Award in ICSIDMEMPC 2020

Mr. Mukul Diwanji and Mr. Saurabh Hisvankar presented a research paper on Temperature measurement using Infrared Contactless Thermal Gun at Virtual International Conference on Smart Innovations in Design, Environment, Management, Planning and Computing (ICSIDMEMPC 2020), MGM JNEC, Aurangabad and won best paper award during 30-31 Oct. 2020 under the guidance of Ms. C.S. Khandelwal.

An initiative of start-up in Electronic LED decorative Lighting

LED lighting is a “Swadeshi movement” inspired product in order to find alternatives to china products. With the warm objective of Swadeshi, team JNEC from Electronics and Telecommunication department started a startup of LED decorative garland design and development. A step towards the start up is a need of an hour to come up academia into the start up.

Its novel style acclaims the appeal of consumers during this Diwali and Christmas time they could succeed to reach several consumers. Very soon this startup will attain the mass production of the same at market competitive rates. Prof. C. S. Khandelwal, Prof. A. R. Salunke, Prof. S. D. Gavarskar, Prof. P.P. Patil, Ms. M. K. Dhawade, Prof. P. B. Murmude and Prof. S. D. Giri has taken efforts for it.

Team efforts were appreciated by Hon. Chancellor MGM University Shri. A. N. Kadam, Vice Chancellor Dr. Sudhir Gavane, Trustee Shri. Pratap Borade, Registrar Dr. Ashish Gadekar, Principal Dr. H. H. Shinde, Vice Principal V. B. Musande and HoD ECT Dr. S. N. Pawar. Khandelwal.

International Summer School

On November 21, a presentation of the International Summer School on the topic “Telecommunications and Information Technologies” was held at the Institute of Computer Technologies and Information Security with the support of The Indian-Russian Scientific Сenter of Southern Federal University. The event was traditionally held in an online format on the MSTeams platform. The meeting was opened by Anton Pljonkin, Director of SFedU Indian-Russian Scientific Сenter, SFedU Rectors Authorized Representative on the cooperation with partners in Republic of India:

Our Electronics staff and some students have successfully completed full-time summer school in June 2019. Those students planned to attend the international Summer School “Telecommunications and information technology” in 2020 have attended online summer school presentation. The current situation didn’t allow us to attend the full-time format of the event, so they organized the presentation of the summer school 2021 in an online format. The event was attended by students and professors from MGMU university JNEC, Aurangabad from India and Fachhochschule Bielefeld University, Germany.

Gennady Veselov, Director of ICTIS, made a welcome speech in the video format, expressing his hope that with the improvement of the epidemiological situation in the world, next summer it would be possible to hold a summer school in full-time format, as well as to continue cooperation in the context of master's programs and postgraduate training.

During the presentation of the international school staff of ICTIS presented a thematic track, which are scheduled for implementation next summer:

  • Semyon Likhtin, senior laboratory assistant at the KIT Student design Bureau, – track on 3D printing,
  • Dmitry Petrov, associate Professor of the Department of information security of telecommunications systems, - track on the basics of electronics,
  • Evgenia Ishchukova, associate Professor of the Department of information technology security, - track on modern cryptographic algorithms and analysis methods,
  • Anton Pljonkin, associate Professor of the Department of information security of telecommunications systems, – track on quantum cryptography and telecommunications.

ECT Faculty Performance in MGMs Foundation Day Gathering 2020

Faculty of ECT performed a drama of “Electronics Naming Ceremony”on the occlusion of MGMs Foundation Day faculty gathering on 19th Dec.2020. The script written by Ms.S.D.Gavaskar, anchored by Ms.S.D.Gavaskar and Ms. P.P.Patil also presented script with Ms. A.R.Salunke, Ms.M.K.Dhawade, Ms.A.P.Phatale, Ms.M.A.Mulay, Ms. C.S.Khandelwal, Dr.V.B.Malode, Dr.V.A.More, Ms. V.A.Kulkarni and Ms.S.D.Giri.

Faculty Development Program at Germany

MGMU’s Jawaharlal Nehru Engineering College has established Innovation Incubation and Research Center (IIRC) for the first time in Marathwada region to enhance industry-oriented skills among students. The college owns industry setups purchased from Christiani Sharpline, a German-based organization. The main facilities of the center includes the Advanced Industrial Automation ,Mechatronics ,Industrial Fluid Power ,Industry 4.0, E-Vehicle and Computer Integrated Manufacturing lab in Association with Christiani Sharpline, Germany and SSIGMA, Pune. The center also has Industrial robotics lab of YASKAWA and TAL BRABO robots. Our main objective is to prepare industry ready engineers and also provide solutions to the surrounding Industries. For this purpose, our faculty also visited Christiani Sharpline, Mumbai and SSIGMA, Pune.

International Sumer School Russia

An Induction program was conducted in the department for newly admitted first year students. In this program various activities were conducted for students like students aspirations and family expectation through which students can get an idea about how to handle aspirations and family expectations, peer pressure as per AICTE guidelines to make them aware of handling peer pressure and various sessions like Gratitude, Self and Body, Prosperity, KBC Game etc.

Industry Visit

Our final year students had visited Greaves Cotton Pvt. Ltd., Aurangabad, on September 10, 2019. The purpose of this visit was to enhance the practical knowledge of the students and to provide them with industrial exposure. The Industry team explained the working and usage of all the electronic systems used there.

Guest Lectures

R.P. Deshpande, a specialist in Indian Capacitor sector, interacted with our third-year students and enlightened them on the topic ‘Electric Vehicles’ on February 4, 2020. The speaker elaborated on various important techniques like better battery selection and battery optimization.

In October 2018 a guest lecture was organized on ‘Industrial Controls & Automation’ by D.K. Deshmukh, Executive Engineer (Retd.) MAHAGENCO, Bhusawal.

On January 27, 2019 a guest lecture on ‘Internet of Things’ was organized by our Proud Alumni Mr. Gurjit Singh Gill, presently working as a Founder and Director of Gill Instruments, Bangalore.

LED Workshop

LED Workshop was arranged for the First-Year students by our faculty members Ms. A.R. Salunke, Ms. C.S. Khandelwal and Ms. S.D. Gavraskar. The aim of the workshop was to develop a cost-effective LED flashing and lighting to understand the modern devices with their capabilities and limitations.

Winners at Different Events

Teaching Faculty


Dr. Sunil N Pawar
Associate Professor

Profile


Jaideep G Rana
Professor

Profile


Faisal I Shaikh
Professor

Profile


Dr. Vandana B Malode
Associate Professor

Profile


Dr. Syed A Naveed
Associate Professor

Profile


Dr. Vijayshree A More
Associate Professor

Profile


Vishwashri A Kulkarni
Assistant Professor

Profile


Suresh A Annadate
Assistant Professor

Profile


Girish R Basole
Assistant Professor

Profile


Aruna P Phatale
Assistant Professor

Profile


Aarti R Salunke
Assistant Professor

Profile


Dr. Chhaya S Khandelwal
Assistant Professor

Profile


Sumedh Damodhar Jadhav
Assistant Professor

Profile


Mrudula A Mulay
Assistant Professor

Profile


Sushama D. Gavarskar
Assistant Professor

Profile


Manish K Pavar
Assistant Professor

Profile


Prajakta B Murmude
Assistant Professor

Profile


Ajay V Khake
Assistant Professor

Profile


Sunita D Giri
Assistant Professor

Profile


Aniket G Patil
Assistant Professor

Profile


Tushar A Mohije
Assistant Professor

Profile


Pratibha P Patil
Assistant Professor

Profile


Vishal J Lipne
Assistant Professor

Profile


Gaurav R Bhalekar
Assistant Professor

Profile